ACOUSTiC SIGNATURE ASIGMAXNB Maximus Neo Turntable Instruction Manual
- June 4, 2024
- ACOUSTIC SIGNATURE
Table of Contents
TURNTABLE
INSTRUCTION MANUAL
MAXIMUS Neo
ASIGMAXNB Maximus Neo Turntable
Dear Acoustic Signature customer,
many thanks for your confidence in our product, the turntable MAXIMUS Neo.
With the purchase of your turntable you acquired a precision instrument for
the play-back of records. To make it sound perfect, there is some attention
necessary for setup and handling. The manufacturing of this turntable and its
assembly takes place completely in Germany at the highest engineering
standards – this still guarantees highest quality after years. Understandably
you want to start immediately as possible with listening to music. We kindly
ask you however to read this guidance before the first use attentively, so
that you can use your turntable optimally. We tried to put all the necessary
information into this manual. If you still should have questions, which are
not answered here, then feel free to contact us directly at
www.acousticsignature.com or by
e-mail: info@as-distribution.de
Your team of Acoustic Signature
Declaration of Conformity
We acknowledge the fact that the device MAXIMUS Neo belongs to this
instruction manual and corresponds to valid EEC guidelines at the time of
printing for the acquisition of the design. All the necessary checks were made
with a positive result
Warranty
Acoustic Signature manufacturer’s warranty. We commit ourselves to replacing incorrect sections of this device free of charge if it should fail within the warranty period. The warranty amounts to 10 years for the bearing and 2 years for the rest of the turntable, counted starting from the purchase date. The manufacturer warranty going beyond the legal warranty duration of 12 months entitled Acoustic-Signature to make his own decision to exchange or repair of the defective sections. If a defect of your device occurs within the warranty period, then please inform Acoustic-Signature or your dealer under specification of the type of the problem. Damage, which takes place via neglect of the operating instruction or via outside mechanical effects, as well as transport damages are excluded from this warranty. The warranty is valid only for the first owner of the turntable.
Use of the turntable
Your turntable has been built to be used in closed rooms. Please use it only
in such rooms. Make sure that there is no water or humidity close to the
turntable or the power supply. In any case of damage or question please
contact your importer/dealer.
Packing
Parts
- Platter
- MAXIMUS Neo chassis
- Power supply
- Bearing oil
- Power cord
- Leather mat (not shown)
- Drive belt (not shown)
- Instruction manual (not shown)
Setup
Preparation
To avoid transport damages the MAXIMUS Neo comes in a carefully designed
packing and is partially preassembled. We recommend having a plane area of
about 600x400mm² / 24×16 square inch for setup. First, take out the chassis
and place it on the designated operating place.
Leveling
After placing the chassis, you can level the turntable by turning the 3 feet.
Use a suitable bubble level for adjustment (e. g. Acoustic-Signatures dual
axis bubble level, see picture below).
**Mounting the platter
**
Before inserting the platter please use the supplied bearing oil and apply 2
drops of it to the front part of the axis
Take away the cover strip over the bearing hole.
Insert the platter carefully into the bearing. Take care that it slides in
slowly and easily. Do not let the platter drop into the bearing hole, as this
may damage the bearing.
Turn the platter by hand to make sure it spins easily.
Now place the belt around the platter and motor pulley (lower groove).
Finally, place the provided leather mat onto the platter.
Fitting a tonearm
Now you can start to mount the tonearm and cartridge according to the setup
manual of the manufacturer.
We provide appropriate arm boards for a wide range of tonearms. Please contact
us for further information.
Insert your chosen artboard into the fixture, if necessary, align it and
tighten it with the 3 hex screws. Apply only light force, when tightening the
set screws.
Connecting the power supply
Simply insert the RJ45 – plug in the socket on the backside of your MAXIMUS Neo and the mains cable to your wall socket. That’s all.
Operating the MAXIMUS Neo
On the right top side of the chassis are 2 push buttons marked with ON/OFF and
33/45.
Simply press the ON/OFF – button for starting the MAXIMUS Neo.
By pressing the 33/45 button you can switch between the speed. The actual
speed is displayed via LED.
Dimensions
Technical data
Dimensions: 415 mm x 315 mm x 120 mm 16,33x 12,4 x 4,7`
Weight: 18 kg / 37,7 lbs
Drive System: 1 integrated AC Synchronous Motor, fine adjustment of speed
possible
Speed range : 33 1/3 RPM and 45 RPM
Power supply : External power adaptor, Input 100V to 260V AC 50Hz, Output
24V DC
Bearing: High precision TIDORFOLON bearing
Chassis: 33mm aluminum one piece chassis, 3 height adjustable feet with
damping
Platter : Aluminium platter Ø300mm x 34mm platter, weight: 5,8kg /
12,8lbs
Acoustic Signature
Made by AS-Distribution GmbH
Hillenbrandstrasse 10
D-73079 Süssen / Germany
Tel: +49 7162 207970
www.acoustic-signature.com
E-Mail: info@as-distribution.de
Rev. 2 / 2022-01-25
References
- signature.com - This website is for sale! - Signature Resources and Information.
- Acoustic Signature - Turntables, Tonearms & Cartridges made in Germany