FORCE 39081 Holder for Mounting User Manual
- June 4, 2024
- FORCE
Table of Contents
User Manual
39081 Holder for Mounting
MONTAGE
Loosen stem bolts. Replace two of the stem bolts with the bolts and spacers provided. Tighten the bolts evenly according to the recommended torque setting.
Universal holder designed for use only with stated compatible devices.
Always use this product only for the intended purpose. If the product is used
improperly, it can cause undesirable damage, further property damage, or
personal injuries.
The manufacturer is not responsible for any damages resulting from the use of
the product in an improper way, in particular its improper use, or failure to
comply with recommendations and warnings.
Any use of the product for any other purpose than that proper one is incorrect
and the manufacturer is not responsible for the consequences caused by such
conduct.
Furthermore, the manufacturer is not responsible for damage, to the product
due to improper storage, incorrect operation, or use of the product in
contravention with these manual instructions.
The manufacturer is not responsible for malfunction, limited functionality,
damage, or destruction of the product due to improper replacement of the
product parts, improper repair, or any non-standard modifications.
The manufacturer is not responsible for the loss or damage of the product
during transport, bad weather, or other effects of weather conditions.
The manufacturer is not liable for damage or destruction of the product or for
any damages incurred by the customer if the product is handled contrary to
this manual.
Dodavatel / Importer
KCK Cyklosport-Mode s.r.o., Bartogova 348, 765 02 Otrokovice-Kvitkovice, CZ
www.kckcyklosport.cz,
www.force.bike
Zeme pavodu Cina / Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>