milwaukee M18 HOSALC Battery Lamp Instruction Manual

M18 HOSALC Battery Lamp

Product Information

The M18 HOSALC is a machine that requires a battery pack to operate. It has a USB port and requires a working plug and cord. The machine has a battery level indicator and a charging status indicator.

Product Usage Instructions

1. Before starting any work on the machine, remove the battery pack.
2. Check the plug and cord for any damage before use. Only have it repaired by a professional if there is any damage.
3. Insert a fully charged battery pack into the machine.
4. Press the power button to turn on the machine.
5. Use the machine as required.
6. When finished, turn off the machine by pressing the power button.
7. Remove the battery pack from the machine and charge it if necessary.

Technical Data
The technical data for the M18 HOSALC is not provided in the user manual extract.

Important Safety and Working Hints

• Remove the battery pack before starting any work on the machine.
• Check the plug and cord for any damage before use. Only have it repaired by a professional if there is any damage.
• Insert a fully charged battery pack into the machine.
• Do not use a damaged or faulty battery pack.
• If the battery is too hot or too cold, allow it to cool or warm up before using it.

Description of Symbols

• Continuous red light: Charging
• Continuous green light: Charging is complete
• Flashing red light: Battery is too hot/cold
• Flashing red/green light: Damaged or faulty battery pack

Product Description

Functionally Description

Remove the battery pack before starting any work on the machine.

• Continuous red: Charging
• Continuous green: Charging is complete
• Flashing red: Battery is too hot/cold
• Flashing red/green: Damaged or faulty battery pack

If the light is plugged into a AC outlet, the light runs in AC mode. Currently the battery will be charged

Devices connected to the USB port are supplied with power.
Any device that uses more than 2,1 A of DC electrical current will trip a self-resetting function and disable the output

TECHNICAL DATA BATTERY LAMP М18 HOSALC

• Lighting time with one fully charged battery (8,0 Ah)
• Mode 3 High Level …………………………………………………….. 3,5 h
• Mode 2 Med Level …………………………………………………………5 h
• Mode 1 Low Level …………………………………………………….. 10 h

Luminous flux

• High Level ………………………………………………………………… 6000 lm / 3,5Hrs
• Med Level ………………………………………………………………… 4000 lm / 5Hrs
• Low Level ………………………………………………………………… 1700 lm / 10Hrs
• Colour rendering index (CRI)…………………………………………. 80
• Colour temperature………………………………………………………. 4000 K

AC-Mode

• AC Input …………………………………………………………………… EU: 110-240 V, UK: 110-240 V
• Rated Power Input …………………………………………………….. 150 W
• Charger rated power input ………………………………………….. 70 W
• Charger output ………………………………………………………….. 18 V
• Quick charge current …………………………………………………. 3,1 A

DC-Mode

• Rated Power Input ………………………………………………………………….80 W
• Battery voltage …………………………………………………………..18 V
• USB Output ………………………………………………………………… 5,0 V / 2,1 A
• Weight without battery ………………………………………………….. 9,6 kg
• Weight according EPTA-Procedure 01/2014 (2.0 Ah …12.0 Ah)10,0 … 11,0 kg
• Protection class ………………………………………………………….. IP 34

WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.

BATTERY LAMP SAFETY INSTRUCTIONS
Warning: Do not direct the light beam at persons or animals and do not stare into the light beam yourself (not even from a distance). Staring into the light beam may result in serious injury or vision loss.
Caution – this product is provided with cooling openings in the bottom enclosure. Only install this luminaire on a surface that will not allow accumulation of water into the housing. Keep the product away from puddles,etc.

CHARGER SAFETY INSTRUCTIONS
Do not store the battery pack together with metal objects (short circuit risk).

Battery Cat.

No.

| DC Volts| Capacity| Cell No.
---|---|---|---
M18B| 18| ≤ 1.5 Ah| 5
M18B2| 18| ≤ 2.0 Ah| 5
M18BX| 18| ≤ 3.0 Ah| 2 x 5
M18B4| 18| ≤ 4.0 Ah| 2 x 5
M18B5.5.5| 18| ≤ 5.0 Ah| 2 x 5
M18B6| 18| ≤ 6.0 Ah| 2 x 5
M18B9| 18| ≤ 9.0 Ah| 3 x 5
M18HB3| 18| ≤ 3.0 Ah| 5
M18HB4| 18| ≤ 4.0 Ah| 5
M18HB5.5| 18| ≤ 5.5 Ah| 2 x 5
M18HB8| 18| ≤ 8.0 Ah| 2 x 5
M18HB12| 18| ≤ 12.0 Ah| 3 x 5

• Do not try to charge non-rechargeable batteries with this charger.
• No metal parts must be allowed to enter the battery section of the charger (short circuit risk).
• Never break open battery packs and chargers and store only in dry rooms. Keep dry at all times.
• Do not touch the tool with conducting objects.
• Never charge a damaged battery pack. Replace by a new one.
• Before use check machine, cable, and plug for any damages or material fatigue. Repairs should only be carried out by authorised Service Agents.
• This appliance is not intended to be used or cleaned by persons with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, unless they have been given instructions concerning the safe use of the appliance by a person legally responsible for their safety. They should be supervised whilst using the appliance. Children shall not use, clean or play with this appliance, which when not in use should be secured out of their reach.
• Warning! To reduce the risk of fi re, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack or charger in fluid or allow a fl uid to fl ow inside them.
• Corrosive or conductive fl uids, such as seawater, certain industrial chemicals, and bleach or bleach containing products, etc., can cause a short circuit.

ADDITIONAL SAFETY INSTRUCTIONS
Remove the battery pack before starting any work on the appliance.
Do not dispose of used battery packs in the household refuse or by burning them. Milwaukee Distributors off er to retrieve old batteries to protect our environment.
Do not store the battery pack together with metal objects (short circuit risk).
Use only compatible Milwaukee chargers from the same battery platform for charging battery packs. Do not use battery packs from other systems.
Battery acid may leak from damaged batteries under extreme load or extreme temperatures. In case of contact with battery acid wash it off immediately with soap and water. In case of eye contact rinse thoroughly for at least 10 minutes and immediately seek medical attention.
Warning! To reduce the risk of fi re, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack or charger in fl uid or allow a fl uid to fl ow inside them. Corrosive or conductive fl uids, such as seawater, certain industrial chemicals, and bleach or bleach containing products, etc., can cause a short circuit.

SPECIFIED CONDITIONS OF USE
The area light is intendend to be used light independent use away from mains supply.
Additionally the charger can charge the specifi ed Milwaukee battery packs.
Do not use this product in any other way as stated for normal use.

CHARGING TIME

CHARGING
After inserting the battery into the reception of the charger the battery will automatically be charged (red lamp is illuminated continuously)
When a hot or cold battery pack is inserted into the charger (fl ashing red lamp), charging will begin automatically once the battery reaches the correct charging temperature
(0°C…60°C).
Charging time varies depending on the battery temperature, charge needed and the type of battery pack being charged.
As soon as charging is completed, the charger switches over to ”trickle” charge to maintain the full capacity (green control lamp is illuminated continuously, red lamp off )
If both LEDs fl ash at the same time, either the battery has not been completely mounted or there is a fault in the battery or the charger. For safety reasons you must stop using the charger and battery immediately and have them inspected by an Milwaukee Customer Service Centre.

BATTERIES

• Battery packs which have not been used for some time should be recharged before use.
• Temperatures in excess of 50°C (122°F) reduce the performance of the battery pack. Avoid extended exposure to heat or sunshine (risk of overheating).
• The contacts of chargers and battery packs must be kept clean.
• For an optimum life-time, the battery packs have to be fully charged, after used.
• To obtain the longest possible battery life remove the battery pack from the charger once it is fully charged.
• For battery pack storage longer than 30 days:
• Store the battery pack where the temperature is below 27°C and away from moisture
• Store the battery packs in a 30% – 50% charged condition Every six months of storage, charge the pack as normal.

TRANSPORTING LITHIUM BATTERIES
Lithium-ion batteries are subject to the Dangerous Goods Legislation requirements.
Transportation of those batteries has to be done in accordance with local, national and international provisions and regulations.

• The user can transport the batteries by road without further requirements.
  Commercial transport of Lithium-Ion batteries by third parties is subject to Dangerous Goods regulations. Transport preparation and transport are exclusively to be carried out by appropriately trained persons and the process has to be accompanied by corresponding experts.

When transporting batteries:

• Ensure that battery contact terminals are protected and insulated to prevent short circuit.
• Ensure that battery pack is secured against movement within packaging.
• Do not transport batteries that are cracked or leak. Check with forwarding company for further advice

MAINTENANCE

For type Y attachments:
If the external fl exible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or similar qualified person in order to avoid a hazard
Caution! Risk of electric shock..

The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualifi ed person.
Use only Milwaukee accessories and spare parts. Should components need to be replaced which have not been described, please contact one of our Milwaukee service agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state the machine type printed as well as the six-digit No. on the label and order the drawing at your local service agents or directly at: Techtronic Industries GmbH, Max-Eyth-Straße 10, 71364 Winnenden, Germany.

SYMBOLS

⚠CAUTION! WARNING! DANGER!

Always disconnect the plug from the socket before carrying out any work on the machine.

Remove the battery pack before starting any work on the machine.

CAUTION: Possibly hazardous optical radiation emitted from this product. Do not stare at operating lamp. May be harmful to the eye.

Please read the instructions carefully before starting the machine.

Do not dispose electric tools, batteries/rechargeable batteries together with household waste material.
Electric tools and batteries that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility.
Check with your local authority or retailer for recycling advice and collection point.

Class II tool.
Tool in which protection against electric shock does not rely on basic insulation only, but in which additional safety precautions, such as double insulation or reinforced insulation, are provided.
There being no provision for protective earthing or reliance upon installation conditions.

Do not burn used battery packs.

Never charge a damaged battery pack. Replace by a new one.

T3 15A: Time-lag fuse 3.15 A

The light source and the control device cannot be exchanged.
This product contains a light source of energy efficiency class E.

CE : European Conformity Mark

UKCA: UK Conformity Mark

Ukraine Conformity Mark

EAC: EurAsian Conformity Mark

Copyright 2022
Techtronic Industries GmbH Max-Eyth-Str. 10
71364 Winnenden Germany
Tel : +49 (0) 7195-12-0
Website: www.milwaukeetool.eu

Techtronic Industries (UK) Ltd Parkway
Marlow SL7 1YL
UK

References

• Milwaukee Tool Europe | Cordless Power Tools, Outdoor Tools, Hand Tools, PPE, Work wear. Storage and Accessories. | Milwaukee Tools Europe

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>