milwaukee M18 BIW12 Cordless Impact Screwdriver Instruction Manual

: October 30, 2023
: Milwaukee

milwaukee M18 BIW12 Cordless Impact Screwdriver

Product Information

The M18 BIW12 and M18 BIW38 are cordless impact wrenches designed for heavy- duty applications. They come with an interchangeable battery pack that needs to be removed before starting any work on the machine. The product has a picture section with operating and functional descriptions and a text section with technical data, important safety and working hints, and description of symbols.

Product Usage Instructions

Check the plug and power cord for any damage before using the product. Only a specialist should repair any defects.
Remove the interchangeable battery pack before starting any work on the machine.
Refer to the picture section with operating and functional descriptions for proper usage instructions.
Refer to the text section with technical data, important safety and working hints, and description of symbols for additional information on product usage.
Use the impact wrench for heavy-duty applications.
Stop using the product immediately if you notice any defects or malfunctions.

Original instructions

Picture section with operating description and functional description

milwaukee-M18-BIW12-Cordless-Impact-Screwdriver-1

Remove the battery pack before starting any work on the machine.

milwaukee-M18-BIW12-Cordless-Impact-Screwdriver-2

milwaukee-M18-BIW12-Cordless-Impact-Screwdriver-3

Handle (insulated gripping surface)

TECHNICAL DATA CORDLESS IMPACT SCREWDRIVER

Production code………………………………………………………………………4435 91 05… …….. 4436 01 05… …000001-999999 . …000001-999999
Tool reception ……………………………………………………………………………. 1/2″ (13 mm) ……….. 3/8″ (10 mm)
No-load speed ………………………………………………………………………. 0-2450 min-1 ………… 0-2450 min-1
Impact range………………………………………………………………………… 0-3350 min-1 ………… 0-3350 min-1
Torque………………………………………………………………………………………..240 Nm ………………..210 Nm
Max. diameter bolt / nut ………………………………………………………..≥ M14 (12.9) / ≥ M16 (8.8) …. ≥ M16 (12.9) / ≥ M18 (8.8)
Battery voltage………………………………………………………………………………18 V …………………….18 V
Weight according EPTA-Procedure 01/2014 (1,5 Ah) ………………………..1,6 kg …………………..1,6 kg
Weight according EPTA-Procedure 01/2014 (3,0 Ah) ………………………..1,9 kg …………………..1,9 kg
Recommended ambient operating temperature ………………………………………….. -18…+50 °C
Recommended battery types…………………………………………………………………..M18B…M18HB
Recommended charger ……………………………………………………..M12-18C, M12-18AC, M12-18FC, M1418C6

Noise information
Measured values determined according to EN 62841
Typically, the A-weighted noise levels of the tool are:

Sound pressure level (Uncertainty K=3dB(A)) ………………………………..94,1 dB (A) …………..94,1 dB (A)
Sound power level (Uncertainty K=3dB(A)) …………………………………..105,1 dB (A) …………105,1 dB (A)

Wear ear protectors!
Vibration information
Total vibration values (vector sum in the three axes) determined according to EN 62841.
Impact tightening of fasteners of the maximum capacity of the tool

Vibration emission value ah,ID ……………………………………………………..11,0 m/s2 ……………..11,0 m/s2
Uncertainty K= …………………………………………………………………………1,77 m/s2 ……………..1,77 m/s2

WARNING
The vibration and noise emission level given in this information sheet has been measured in accordance with a standardized test given in EN 62841 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration and noise emission level represents the main applications of the tool. However if the tool is used for diﬀerent applications, with diﬀerent accessories or poorly maintained, the vibration and noise emission may diﬀer. This may signiﬁcantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration and noise should also take into account the times when the tool is switched oﬀ or when it is running but not actually doing the job. This may signiﬁcantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the eﬀects of vibration and/or noise such as: maintain the tool and the accessories, keep the hands warm, organization of work patterns.

WARNING Read all safety warnings, instructions, illustrations and speciﬁcations provided with this power tool. Failure to follow all instructions listed below may result in electric shock, ﬁre and/or serious injury.
Save all warnings and instructions for future reference.

IMPACT WRENCH SAFETY WARNINGS

Hold the power tool by insulated gripping surfaces, when performing an operation where the fastener may contact hidden wiring. Fasteners contacting a „live“ wire may make exposed metal parts of the power tool „live“ and could give the operator an electric shock.
Wear ear protectors. Exposure to noise can cause hearing loss.

ADDITIONAL SAFETY AND WORKING INSTRUCTIONS

Use protective equipment. Always wear safety glasses when working with the machine. The use of protective clothing is recommended, such as dust mask, protective gloves, sturdy non-slip footwear, helmet and ear defenders.
The dust produced when using this tool may be harmful to health. Do not inhale the dust. Wear a suitable dust protection mask.
Do not machine any materials that present a danger to health (e.g. asbestos).
Switch the device oﬀ immediately if the insertion tool stalls! Do not switch the device on again while the insertion tool is stalled, as doing so could trigger a sudden recoil with a high reactive force. Determine why the insertion tool stalled and rectify this, paying heed to the safety instructions.
The possible causes may be:

it is tilted in the workpiece to be machined
it has pierced through the material to be machined
the power tool is overloaded
Do not reach into the machine while it is running. The insertion tool may become hot during use.
when changing tools
when setting the device down

Chips and splinters must not be removed while the machine is running.
When working in walls ceiling, or ﬂ oor, take care to avoid electric cables and gas or waterpipes.
Clamp your workpiece with a clamping device. Unclamped workpieces can cause severe injury and damage.
Remove the battery pack before starting any work on the machine.
Do not dispose of used battery packs in the household refuse or by burning them. Milwaukee Distributors oﬀ er to retrieve old batteries to protect our environment.
Do not store the battery pack together with metal objects (short circuit risk).
Use only System M18 chargers for charging System M18 battery packs. Do not use battery packs from other systems.
Never break open battery packs and chargers and store only in dry rooms. Keep dry at all times.
Battery acid may leak from damaged batteries under extreme load or extreme temperatures. In case of contact with battery acid wash it oﬀ immediately with soap and water. In case of eye contact rinse thoroughly for at least 10 minutes and immediately seek medical attention.
M18 BIW12: Do not use battery M18HB12 with this machine!

Warning! To reduce the risk of ﬁ re, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack or charger in ﬂuid or allow a ﬂuid to ﬂ ow inside them. Corrosive or conductive ﬂuids, such as seawater, certain industrial chemicals, and bleach or bleach containing products, etc., can cause a short circuit.

SPECIFIED CONDITIONS OF USE

The cordless impact wrench can be used to tighten and loosen nuts and bolts wherever no mains connection is available.
Do not use this product in any other way as stated for normal use.

EC-DECLARATION OF CONFORMITY

We declare under our sole responsibility that the product described under “Technical Data” fulﬁ lls all the relevant regulations and the directives 2011/65/EU (RoHS), 2014/30/EU, 2006/42/EC, and the following harmonized standards have been used:
EN 62841-1:2015
EN 62841-2-2:2014
EN 55014-1:2017+A11:2020
EN 55014-2:2015
EN IEC 63000:2018
Winnenden, 2020-10-23
Alexander Krug
Managing Director
Authorized to compile the technical ﬁ le.
Techtronic Industries GmbH
Max-Eyth-Straße 10
71364 Winnenden
Germany

GB-DECLARATION OF CONFORMITY

We declare as the manufacturer under our sole responsibility that the product described under “Technical Data” fulﬁ lls all the relevant provisions of the following Regulations S.I. 2008/1597 (as amended), S.I. 2016/1091 (as amended), S.I. 2012/3032 (as amended) and that the following designated standards have been used:
BS EN 62841-1:2015
BS EN 62841-2-2:2014
BS EN 55014-1:2017+A11:2020
BS EN 55014-2:2015
BS EN IEC 63000:2018
Winnenden, 2020-10-23
Alexander Krug
Managing Director
Authorized to compile the technical ﬁ le.
Techtronic Industries GmbH
Max-Eyth-Straße 10
71364 Winnenden
Germany

OPERATION

Note: It is recommended after fastening to always check the torque with a torque wrench.
The fastening torque is aﬀected by a wide variety of factors including the following.

State of battery charge – When the battery is discharged voltage will drop and the fastening torque will be reduced.
Operation at speeds – Operating the tool at low speeds will cause a reduction in fastening torques.
Fastening position – Holding the tool or the driving fastener in various angles will aﬀect the torque.
Drive accessory/socket – Failure to use the correct size accessory or socket, or a non-impact rated accessory may cause a reduction in the fastening torque.
Use of accessories and extensions – Depending on the accessory or extension ﬁtment can reduce the fastening force of the impact wrench.
Bolt/Nut – Fastening torques may diﬀer according to the diameter of the nut or bolt, the class of nut/bolt and the length of nut/bolt.
Condition of the fastener – Contaminated, corroded, dry or lubricated fasteners may vary the fastening torques.
Condition and base material – The base material of the fastener and any component in between the surfaces may eﬀ ect the fastening torque (dry or lubricated base, soft or hard base, disc, seal or washer between fastener and base material).

IMPACTING TECHNIQUES

The longer a bolt, screw, or nut is impacted, the tighter it will become.
To help prevent damaging the fasteners or workpieces, avoid excessive impacting.
Be particularly careful when impacting smaller fasteners because they require less impacting to reach optimum torque.
Practice with various fasteners, noting the length of time required to reach the desired torque.
Check the tightness with a hand-torque wrench.
If the fasteners are too tight, reduce the impacting time.
If they are not tight enough, increase the impacting time.
Oil, dirt, rust or other matter on the threads or under the head of the fastener aﬀ ects the degree of tightness.
The torque required to loosen a fastener averages 75% to 80% of the tightening torque, depending on the condition of the contacting surfaces.
On light gasket jobs, run each fastener down to a relatively light torque and use a hand torque wrench for ﬁnal tightening.

BATTERIES

Battery packs which have not been used for some time should be recharged before use.
Temperatures in excess of 50°C (122°F) reduce the performance of the battery pack. Avoid extended exposure to heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, after use, the battery packs have to be fully charged.
To obtain the longest possible battery life remove the battery pack from the charger once it is fully charged.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below 27°C and away from moisture
Store the battery packs in a 30% – 50% charged condition Every six months of storage, charge the pack as normal.

BATTERY PACK PROTECTION

In extremely high torque, binding, stalling and short circuit situations that cause high current draw, the tool will vibrate for about 2 seconds and then the tool will turn OFF.
To reset, release the trigger.
Under extreme circumstances, the internal temperatur of the battery could become to high. If this happens, the battery will shut down.
Place the battery on the charger to charge and reset it.

TRANSPORTING LITHIUM BATTERIES

Lithium-ion batteries are subject to the Dangerous Goods Legislation requirements.
Transportation of those batteries has to be done in accordance with local, national and international provisions and regulations.

The user can transport the batteries by road without further requirements.
Commercial transport of Lithium-Ion batteries by third parties is subject to Dangerous Goods regulations. Transport preparation and transport are exclusively to be carried out by appropriately trained persons and the process has to be accompanied by corresponding experts.

When transporting batteries:

Ensure that battery contact terminals are protected and insulated to prevent short circuit.
Ensure that battery pack is secured against movement within packaging.
Do not transport batteries that are cracked or leak. Check with forwarding company for further advice

MAINTENANCE

Use only Milwaukee accessories and spare parts. Should components need to be replaced which have not been described, please contact one of our Milwaukee service agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state the machine type printed as well as the six-digit No. on the label and order the drawing at your local service agents or directly at: Techtronic Industries GmbH,
Max-Eyth-Straße 10, 71364 Winnenden, Germany.

SYMBOLS

CAUTION! WARNING! DANGER!
Remove the battery pack before starting any work on the machine.
Please read the instructions carefully before starting the machine.
Do not dispose electric tools, batteries/rechargeable batteries together with household waste material. Electric tools and batteries that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. Check with your local authority or retailer for recycling advice and collection point.
al parts of the power tool „live“ and could give the operator an electric shock.
No-load speed
Impact range
Volts
Direct current
European Conformity Mark)
British Conformity Mark
Ukraine Conformity Mark
Eurasian Conformity Mark