milwaukee M18 PC6 6 Bay Packout Charger Instruction Manual
- October 30, 2023
- Milwaukee
Table of Contents
milwaukee M18 PC6 6 Bay Packout Charger
Product Information
The M18 PC6 is a 6-Bay Packout Charger designed to charge Milwaukee M18 batteries. It has a voltage input range of 100-240V and a charging output of 18V/6A. It also has a USB output with a maximum current of 2.1A for charging USB devices. The charger has a self-resetting function that trips when a device connected to the USB port uses more than 2.1A of DC electrical current and disables the output. The charger has a weight of approximately 8.2 lbs.
Product Usage Instructions
- Connect the charger to a power outlet using the provided power cord.
- Insert up to six Milwaukee M18 batteries into the charger bays.
- The charger will automatically detect the battery type and start charging.
- The LED indicators next to each battery bay will show the charging progress. Green lights indicate that the battery is charging, and when the charging is complete, the light will turn solid green.
- The USB port on the charger can be used to charge USB devices. Connect the device to the USB port using a compatible cable.
- Devices connected to the USB port are supplied with power. Any device that uses more than 2.1A of DC electrical current will trip a self-resetting function and disable the output.
- Do not dispose of used batteries in household refuse or burn them. Milwaukee distributors offer to retrieve old batteries to protect the environment.
WARNING! Read all safety warnings and instructions before using the product. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury. Save all warnings and instructions for future reference.
Operating description
Devices connected to the USB port are supplied with power. Any device that uses more than 2,1 A of DC electrical current will trip a self-resetting function and disable the output.
TECHNICAL DATA M18 PC6
- Type: 6-Bay Packout Charger
- Battery Voltage: 6-Bay Packout Charger
- Input Volts: 100-240 V
- Input Current: 2,5 A
- Output Charger: 18 V / 6 A
- Output USB max.: 5 V / max. 2,1 A
- Stand-by operation: 50 mA
- Weight according EPTA-Procedure 01/2014: 4,99 kg
- Recommended ambient charging temperature: + 5°C … + 40°C
WARNING! Read all safety warnings and all instructions. Failure to follow
the warnings and instructions may result in electric shock, fi re and/or
serious injury.
Save all warnings and instructions for future reference.
SAFETY INSTRUCTIONS
Do not dispose of used batteries in the household refuse or by burning them.
Milwaukee Distributors off er to retrieve old batteries to protect our
environment.
The following batteries can be charged with this charger:
| Battery Cat. No. | Cell Type | DC Volts | Capacity | Cell No. |
|---|---|---|---|---|
| M18B | Li-Ion | 18 V | ≤ 1.5 Ah | 5 |
| M18B2 | Li-Ion | 18 V | ≤ 2.0 Ah | 5 |
| M18BX | Li-Ion | 18 V | ≤ 3.0 Ah | 2 x 5 |
| M18B4 | Li-Ion | 18 V | ≤ 4.0 Ah | 2 x 5 |
| M18B5 | Li-Ion | 18 V | ≤ 5.0 Ah | 2 x 5 |
| M18B6 | Li-Ion | 18 V | ≤ 6.0 Ah | 2 x 5 |
| M18B9 | Li-Ion | 18 V | ≤ 9.0 Ah | 3 x 5 |
| M18HB3 | Li-Ion | 18 V | ≤ 3.0 Ah | 5 |
| M18HB4 | Li-Ion | 18 V | ≤ 4.0 Ah | 5 |
| M18HB5.5 | Li-Ion | 18 V | ≤ 5.5 Ah | 2 x 5 |
| M18HB8 | Li-Ion | 18 V | ≤ 8.0 Ah | 2 x 5 |
| M18HB12 | Li-Ion | 18 V | ≤ 12.0 Ah | 3 x 5 |
Do not try to charge non-rechargeable batteries with this charger.
- Do not store the battery together with metal objects (short circuit risk).
- No metal parts must be allowed to enter the battery section of the charger (short circuit risk).
- Never break open batteries and chargers and store only in dry rooms. Keep dry at all times.
- Do not touch the tool with conducting objects.
- Never charge a damaged battery pack. Replace by a new one. Before use check machine, cable, and plug for any damages or material fatigue. Repairs should only be carried out by authorized Service Agents.
- Always place the charger on a level, well ventilated surface (e.g. not on a car seat).
- Do not place anything, such as a jacket, over the charger and battery.
This appliance is not intended to be used or cleaned by persons with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, unless they have been given instructions concerning the safe use of the appliance by a person legally responsible for their safety. They should be supervised whilst using the appliance. Children shall not use, clean or play with this appliance, which when not in use should be secured out of their reach.
Warning! To reduce the risk of fi re, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack or charger in fl uid or allow a fl uid to fl ow inside them. Corrosive or conductive fl uids, such as seawater, certain industrial chemicals, and bleach or bleach containing products, etc., can cause a short circuit.
SPECIFIED CONDITIONS OF USE
This charger charges 18V Milwaukee Li-Ion battery packs.
Do not use this product in any other way as stated for normal use.
CHARGING TIME
Battery Cat. No.
M18B M18B2 M18BX M18B4 M18B5 M18B6 M18B9 M18HB3 M18HB4 M18HB5.5 M18HB8 M18HB12
| Volts
18 V
18 V
18 V
18 V
18 V
18 V
18 V
18 V
18 V
18 V
18 V
18 V
| Capacity
≤ 1.5 Ah
≤ 2.0 Ah
≤ 3.0 Ah
≤ 4.0 Ah
≤ 5.0 Ah
≤ 6.0 Ah
≤ 9.0 Ah
≤ 3.0 Ah
≤ 4.0 Ah
≤ 5.5 Ah
≤ 8.0 Ah
≤ 12.0 Ah
| Charging Time approx.
21 min
27 min
35 min
48 min
63 min
73 min
101 min
≤ 35 min
≤ 35 min
≤ 60 min
85 min
128 min
---|---|---|---
MAINS CONNECTION
Connect only to single-phase AC current and only to the system voltage
indicated on the rating plate. It is also possible to connect to sockets
without an earthing contact as the design conforms to safety class II.
NOTES FOR LI-ION BATTERIES
Use of Li-Ion batteries
Batteries which have not been used for some time should be recharged before
use.
Temperatures in excess of 50°C (122°F) reduce the performance of the battery.
Avoid extended exposure to heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, the batteries have to be fully charged, after used.
To obtain the longest possible battery life remove the battery pack from the
charger once it is fully charged.
For battery storage longer than 30 days:
Store the battery where the temperature is below 27°C and away from moisture
Store the battery in a 30% – 50% charged condition
Every six months of storage, charge the battery as normal.
Battery protection for Li-Ion batteries
In extremely high torque, binding, stalling and short circuit situations that
cause high current draw, the tool will vibrate for about 5 seconds, the fuel
gauge will flash, and then the tool will turn OFF. To reset, release the
trigger.
Under extreme circumstances, the internal temperature of the battery could
become to high. If this happens, the fuel gauge will flash and the battery pack
cool and then continue work.
Transport of Li-Ion batteries
Lithium-ion batteries are subject to the Dangerous Goods Legislation
requirements.
Transportation of those batteries has to be done in accordance with local,
national and international provisions and regulations.
- The user can transport the batteries by road without further requirements.
- Commercial transport of Lithium-Ion batteries by third parties is subject to Dangerous Goods regulations. Transport preparation and transport are exclusively to be carried out by appropriately trained persons and the process has to be accompanied by corresponding experts.
When transporting batteries:
- Ensure that battery contact terminals are protected and insulated to prevent short circuit.
- Ensure that battery pack is secured against movement within packaging.
- Do not transport batteries that are cracked or leak.
Check with forwarding company for further advice
CHARACTERISTICS
After inserting the battery into the reception of the charger the battery will
automatically be charged (red lamp is illuminated continuously)
When a hot or cold battery pack is inserted into the charger (flashing red
lamp), charging will begin automatically once the battery reaches the correct
charging temperature (5°C…40°C). The max. charging current is fl owing when the
temperature of the battery is between 5°C and 40°C.
The battery’s charging time is between 1 min and 21 min (at 1,5 Ah battery),
depending on the state of discharge.
Once the battery is fully charged, the LED on the charger changes from red to
green and the LEDs on the battery go out.
It is not necessary to remove the battery after charging. The battery can be
stored permanently in the charger without the danger of being overcharged.
If both LEDs fl ash alternately then the rechargeable battery is either not
fully pushed in or there is a fault with the battery or charger. Take the
charger and battery out of use immediately for safety reasons and have them
inspected by a Milwaukee customer service centre.
Two 18V battery packs can be inserted into the charger at the same time, one on each side of the charger. It will then charge any other attached batteries in sequence in a clockwise rotation.
CHARGER LIGHT INDICATORS
USB POWER OUTLET
This outlet can be used to charge a cell phone, power an MP3 player or any
other devices that uses less than 2,1 A of DC electrical current.
MAINTENANCE
If the supply cord of this appliance is damaged, it must only be replaced by a
repair shop appointed by the manufacturer, because special purpose tools are
required
Use only Milwaukee accessories and Milwaukee spare parts. Should components
need to be replaced which have not been described, please contact one of our
Milwaukee service agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state the
machine type printed as well as the six-digit No. on
the label and order the drawing at your local service agents or directly at:
Techtronic Industries GmbH, Max-Eyth-Straße 10, 71364 Winnenden, Germany.
SYMBOLS
Please read the instructions carefully before starting the machine.
Safety
class III
This tool is only suitable for indoor use. Never expose tool to rain.
Class II tool
Time-lag fuse 5,0 A
Do not dispose of waste batteries, waste electrical and electronic equipment
as unsorted municipal waste. Waste batteries and waste electrical and
electronic equipment must be collected separately.
Waste batteries, waste accumulators and light sources have to be removed from
equipment.
Check with your local authority or retailer for recycling advice and
collection point.
According to local regulations retailers may have an obligation to take back
waste batteries and Waste electrical and electronic equipment free of charge.
Your contribution to reuse and recycling of waste batteries and waste
electrical and electronic equipment helps to reduce the demand of raw
materials.
Waste batteries, in particular containing lithium and waste Electrical and
electronic equipment contain valuable, recyclable materials, which can
adversely impact the environment and the human health, if not disposed of in
an environmentally compatible manner. Delete personal data from waste
equipment, if any.
CE : European Conformity Mark
UKCA: UK Conformity Mark
Ukraine Conformity Mark
EAC: EurAsian Conformity Mark
Copyright 2022
Techtronic Industries GmbH Max-Eyth-Str. 10
71364 Winnenden Germany
Tel : +49 (0) 7195-12-0
Website: www.milwaukeetool.eu
Techtronic Industries (UK) Ltd Parkway
Marlow SL7 1YL
UK
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>