milwaukee M12 CML Battery Lamp Instruction Manual

milwaukee M12 CML Battery Lamp

Product Information

The product is the M12 CML, a machine that requires a battery pack to operate. It comes with original usage instructions in different languages and a technical data section that provides important safety and working hints along with symbol descriptions. The machine has different modes and color options, and it has a mode memory function that allows the selected operating mode to be available again when switching on again.

Product Usage Instructions

Before starting any work on the machine, remove the battery pack. Check the plug and power cord for possible damage, which should only be repaired by a specialized technician. Follow the instructions provided in the original user manual to operate the machine safely and efficiently. To select a mode or color option, use the buttons labeled with the corresponding numbers or symbols. The machine also has an ON/OFF switch that should be used to turn it on and off. If you want to save a selected operating mode, use the MODE memory function.

Overview

Battery Installation

• Remove the battery pack before starting any work on the machine.

Battery Indicators

Using Info

Power

Indicators And Modes

MODE memory: the selected operating mode is available again when switching on again.

TECHNICAL DATA

• Type: Battery-Lamp
• Rated power input: 18 W
• Battery voltage: 12 V
• Luminous flux
  • High: 1000 lm
  • Medium: 600 lm
  • Low: 300 lm
• Lighting time (4.0 Ah)
  • High: 6 h
  • Medium: 8 h
  • Low: 14 h
• Colour rendering index (CRI): 98+
• Colour temperature: 2700 K / 3500 K / 4500 K / 5500 K / 6500 K
• Protection class: IP54
• Weight according EPTA-Procedure 01/2014 (2.0…6.0 Ah): 0,58 …. 0,83 kg
• Recommended ambient operating temperature: -18°C … +50 °C
• Recommended battery types: M12B…
• Recommended charger: M12-18 C; M12-18 FC; M12-18 AC; M12 C4; C12 C

WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.

SAFETY INSTRUCTIONS BATTERY-LAMP

Warning: Do not direct the light beam at persons or animals and do not stare into the light beam yourself (not even from a distance). Staring into the light beam may result in serious injury or vision loss.

• Ensure that the luminaire does not cause harm if its magnet fails to keep it is position.

SAFETY INSTRUCTIONS BATTERY

• Battery acid may leak from damaged batteries under extreme load or extreme temperatures. In case of contact with battery acid wash it off immediately with soap and water. In case of eye contact rinse thoroughly for at least 10 minutes and immediately seek medical attention.
• Warning: To reduce the risk of fire, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack or charger in fluid or allow fluid to flow inside them.
• Corrosive or conductive fluids, such as seawater, certain industrial chemicals, and bleach or bleach-containing products, etc., can cause a short circuit.

SPECIFIED CONDITIONS OF USE

• The colour matching light creates light that is close to natural sun light to match colour specs for painting cars and detecting scratches and imperfections cars for detail work.
• It also can be used for general and heavy maintenance, collision repair and paint re-work.
• Do not use this product in any other way as stated for normal use.

SELECT COLOUR TEMPERATURE

• Different colour temperatures can be selected by pressing the colour button.

NOTES FOR LI-ION BATTERIES

Use of Li-Ion batteries

• Batteries which have not been used for some time should be recharged before use.
• Temperatures in excess of 50°C (122°F) reduce the performance of the battery. Avoid extended exposure to heat or sunshine (risk of overheating).
• The contacts of chargers and batteries must be kept clean.
• For an optimum life-time, the batteries have to be fully charged, after used.
• To obtain the longest possible battery life remove the battery pack from the charger once it is fully charged.

For battery storage longer than 30 days:

• Store the battery where the temperature is below 27°C and away from moisture
• Store the battery in a 30% – 50% charged condition
• Every six months of storage, charge the battery as normal.

Transport of Li-Ion batteries

Lithium-ion batteries are subject to the Dangerous Goods Legislation requirements. Transportation of those batteries has to be done in accordance with local, national and international provisions and regulations.

• The user can transport the batteries by road without further requirements.
• Commercial transport of Lithium-Ion batteries by third parties is subject to Dangerous Goods regulations. Transport preparation and transport are exclusively to be carried out by appropriately trained persons and the process has to be accompanied by corresponding experts.

When transporting batteries:

• Ensure that battery contact terminals are protected and insulated to prevent short circuit.
• Ensure that battery pack is secured against movement within packaging.
• Do not transport batteries that are cracked or leak.
• Check with forwarding company for further advice.

MAINTENANCE

The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person. Use only Milwaukee accessories and Milwaukee spare parts. Should components need to be replaced which have not been described, please contact one of our Milwaukee service agents (see our list of guarantee/service addresses).

If needed, an exploded view of the tool can be ordered. Please state the machine type printed as well as the six-digit No. on the label and order the drawing at your local service agents or directly at Techtronic Industries GmbH, Max-Eyth-Straße 10, 71364 Winnenden, Germany.

SYMBOLS

• Please read the instructions carefully before starting the machine.
• CAUTION! WARNING! DANGER!)
• Do not stare at the operating light source.)
• Class III electrical protection.
• Do not dispose electric tools, batteries/rechargeable batteries together with household waste material.
• Electric tools and batteries that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility.
• Check with your local authority or retailer for recycling advice and collection point.
• European Conformity Mark
• UK Conformity Mark
• Ukraine Conformity Mark
• EurAsian Conformity Mark

Contact

Techtronic Industries GmbH

• Max-Eyth-Str. 10
• 71364 Winnenden Germany
• +49 (0) 7195-12-0
• www.milwaukeetool.eu

Techtronic Industries (UK) Ltd

• Fieldhouse Lane
• Marlow Bucks SL7 1HZ UK

Copyright 2021

References

• Milwaukee Tool Europe | Cordless Power Tools, Outdoor Tools, Hand Tools, PPE, Work wear. Storage and Accessories. | Milwaukee Tools Europe

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>