Hkoenig HK8 Kitchen Robot Instruction Manual

HK8 Kitchen Robot

HK8 Kitchen Robot

The HK8 Kitchen Robot is a versatile and powerful kitchen appliance that can help you with various tasks such as blending, steaming, and kneading. The package comes with several accessories that you need to know and understand before using the appliance.

Package Checking

When you open the packing box, take out all the accessories and get to know them according to the components list. The spare parts are as follows:

• Main body
• Steamer lid
• Blending jar
• Filter basket
• Jar lid
• Small steamer
• Big steamer
• Butterfly
• Measuring cup
• Spatula
• Recipe book

Blending Jar Assembly
The blending jar assembly is used for blending and has a maximum capacity of 2L. There are jar capacity marks on one side of the jar. Make sure not to exceed the maximum capacity of the jar to avoid any danger. Follow these steps to use the blending jar assembly:

1. Put the lid on the jar and press the safety switch.
2. Turn the lid clockwise to fix it onto the jar.
3. Put the jar onto the main body at the correct direction and sit properly.
4. To fix the blade assembly, fix the sealing ring on the blade assembly, put it into the through-hole of the jar bottom, hold the half top of the blade tightly and turn bottom upside, use the fixing bracket to fix the blade by turning clockwise.

Kneading Shaft Assembly
The kneading shaft assembly is used for kneading or stirring and mixing without cutting the food. Follow these steps to use the kneading shaft assembly:

1. Remove the blade from the blending jar assembly.
2. Fix the kneading shaft assembly in the same way as fixing the blade.

Filter Basket
The filter basket has many functions and can be used for several tasks such as pouring out juice and removing water from food.

Follow these steps to use the filter basket:

1. Place the basket into the jar to help pour out the juice.
2. To remove water from food, such as tomatoes, take the measuring cup away and cover with the basket instead.
3. Make sure to remove any food particles from the edge of the basket to put it into or take it out of the jar.

Steamer Assembly
The steamer assembly has three parts – small steamer, big steamer, and lid. Follow these steps to use the steamer assembly:

1. Remove the jar lid from the blending jar assembly.
2. Sit the steamer on top of the jar.
3. The lid can be put on both the small steamer and big steamer, and the big steamer can sit on the small steamer.

Usage Instructions

Follow these instructions to use the HK8 Kitchen Robot:

1. Turn on the appliance by pressing the ON/OFF button at the back of the machine.
2. To start working immediately, press the START/PAUSE button.
3. To pause the working process, press the START/PAUSE button again. The appliance will go into standby mode, and the LCD will show the remaining time.
4. To stop or cancel the process, press the STOP/CANCEL button. If there is no operation for more than 10 minutes under pause status, press the preset button to cancel.
5. To adjust the speed, turn the SPEED knob clockwise or anti-clockwise. The appliance gets into speed setting mode, and the signal on LCD flickers.
6. To adjust the timer, turn the TIMER knob. The signal on LCD flickers.

Important Safety Instruction.

• The following safety precautions should always be followed, to reduce the risk of electric shock, personal injury or fire. It is important to read all of these instructions carefully before using the product, and to save them for future reference or new users.
• This appliance may be used by persons with reduced physical, sensory or mental capabilities or lack of experience or knowledge, provided that they are supervised or instructed in the safe use of the appliance and that they fully understand the potential hazards.
• This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.
• Warning: potential injury from misuse. Care shall be taken when handling the sharp cutting blades emptying the bowl and during cleaning.
• Switch off the appliance and disconnect from supply code before changing accessories or approaching parts that move in use. Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• Accessories, other than those supplied with the appliance, shall include instructions for their safe use.
• WARNING: Do not remove the lid while the water is boiling. Do not set speed more than level 4 when temperature higher than 90 degree centigrade.
• The appliance must not be immersed.
• Your appliance has been designed for domestic use only. It is not intended for use in the following situations which are not covered by the warranty:
  • in staff kitchen areas in shops, offices and other professional environments,
  • in farm hostels,
  • by guests in hotels, motels and other residential environments,
  • in bed and breakfast type environments.
• Please put the unit on stable, flat table which will not become hot and ensure it is in safe distance from the edge to avoid falling down. When it is used to knead the dough or cut food, the unit may move because of vibration. So please do not use it without super vision of people so as to avoid the equipment falling down to the floor.
• Please pull out the plug when cleaning the appliance or put it away for a long time.
• Regularly check whether the main body, jar, steamer or other components are damaged or not. The damaged parts will decrease the safety of use. Once something wrong is found, please stop using and contact our after-sales service center.
• If the appliance stops unexpectedly or appears to malfunction, switch off the power supply, unplug from the mains and stop using immediately. Seek professional advice to rectify the fault or make repairs.
• The measuring cup is the only part which can be used to cover the round hole in the jar lid. Please do not use cloth or similar things to cover the hole.
• Do not touch the edge of blades. Please be careful and hold the top part when you assemble or remove the blade.
• Pay attention to the capacity mark on the blender jar.
• Open the lid until the food in the jar stops rotating.
• Pay attention to the high-temperature food when you open the jar lid. Please put the measuring cup at the hole of jar lid correctly when processing food.
• Do not touch the jar when processing hot food of more than 60°C.
• Make sure that steamer and the jar are connected well when using steamer.
• Pay attention that vapor will outflow through the cover top or sides.
• In operation, do not touch any place of the steamer except its handles.
• Do not use the steamer without the steamer lid in place.
• When opening the steamer lid, be careful not to be scalded by vapor.
• When using steaming and boiling setting, pay attention that vapor will outflow through jar mouth when move the steamer.
• Keep on checking that the vent hole on the steamer lid is unblocked, or else the vapor may come out somewhere else.
• Please put the appliance and its hot after-use parts in the place which is out of the children’s reach and warn the children that the unit will become hot and do not touch it.
• The leakage of food: Make sure that the blade sealing ring is placed well and the blade assembly is tightly fixed by the fixing bracket on the bottom. The failure of installation will cause the food leakage which will damage the appliance.
• Damage of poor ventilation: Ensure that the vents on the back of the main body are not blocked by any articles, or else the equipment will be damaged.
• The jug and all the accessories are to be used only with the stand provided. Do not use the foreign parts on this machine.
• Pay attention to avoid spillage on the connector.
• The jug will be still hot due to residual heat after use, take care not to get burnt.
• This appliance may be used by children of at least 8 years of age, as long as they are supervised and have been given instructions about using the appliance safely and are fully aware of the dangers involved.
• Cleaning and maintenance should not be carried out by children unless they are at least 8 years of age and are supervised by an adult.
• Keep the appliance and its power cord out of reach of children under 8 years of age.
• When using electrical equipment, safety precautions must always be taken to prevent the risk of fire, electric shock and/or injury in the event of misuse.
• Make sure that the voltage rating on the type plate corresponds to your main voltage of your installation. If this is not the case, contact the dealer and do not connect the unit
• Never leave the unit unattended while in operation.
• Never open the appliance from the front, always position yourself slightly to the side to avoid burning yourself with steam.
• The device must not be used if it has been dropped, it obvious signs of damage are visible or if it has leaks.
• Do not operate this appliance if it has a damaged cord or plug, if it is not working properly or if it has been damaged or dropped. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

PACKAGE CHECKING
When opening the packing box, take out all the accessories and get to know them according to the components list. The spare parts are as follows:

1. Main body
2. Blending jar
3. Jar lid
4. Measuring cup
5. Small steamer
6. Big steamer
7. Steamer lid
8. Filter basket
9. Butterfly Spatula
10. Recipe book

ACCESSORIES

Blending Jar assembly:
There are jar capacity marks on one side of the jar. The maximum capacity of the jar is 2L.

Put the lid on the jar, press the safety switch, turn the lid clockwise to fix the lid onto the jar, or else the motor can not be started. (Always push the safety switch first to lock or open the lid)

Put the jar onto the main body at the correct direction and sit properly, or else the motor cannot be started.

Blade assembly:
Fix the sealing ring on the blade assembly, put it into the through the hole of the jar bottom, hold the half top of the blade tightly and turn bottom upside, use the fixing bracket to fix the blade by turning clockwise. Doing oppositely to remove it from the jar. Do not miss the blade sealing ring between the blade and the jar bottom.

Notice

• The blade is very sharp. Please wrap the blade with washcloth when assembling or removing the blade base.
• Please hold the blade assembly firmly and take it out carefully so as to ensure that blade assembly will not fall down and cause danger.
• Please make sure that the fixing bracket and the sealing ring is in place and locked tightly with blade assembly. If the sealing ring isn’t well placed, the food being mixed or cooked may leak out and damage theappliance.

Kneading shaft assembly:
Remove the blade, fix the kneading shaft the same way as fixing the blade. It can be used for kneading, or stirring and mixing without cutting the food.

Notice

• Do not use it for speed over 3, otherwise it will cause big vibration to the machine and cause risk.
• As the smallest distance between the stirring assembly and the jar wall is only 1cm, sometimes the food may stuck and the motor may stop for self protection. Use the spatula to mix and remove the stuck and it will be smoothly working again.
• Please make sure that the fixing bracket and the sealing ring is in place and locked tightly with blade assembly. If the sealing ring isn’t well placed, the food being mixed or cooked may leak out and damage the appliance

Measuring cup:

• The measuring cup has many functions: it is a part of the lid to prevent losing heat or splashing; it is a measuring cup to measure the ingredients with full capacity 150ml.
• Put the measuring cup into the hole of the lid, turn it clockwise to fix it on the lid.

Notice

• The measuring cup is the only part which can be used to cover the round hole of the lid
• Do not cover the hole by any other articles to avoid splash of the food to cause danger

Spatula:

• The spatula is the only comp on enter to be used to scrape the food in the jar. The other articles may cause damage to the non-stick coating inside of the jar.
• There is a small groove on the handle of the spatula, use it to hold the filter basket

Notice

• Do not use it to mix in the jar when the blade is working.
• Do not use the spatula if butterfly is inside.
• Do fix closely the handle with the filter basket before lifting it.

Filter basket:
The basket has many functions:

• Sieve. Filter fruit and Vegetable juice. After grinding or making fruit sauce with the appliance, put the basket into the jar to help pour out the juice.
• Stew soft food such as pasta or noodles;
• Cook side dishes, such as rice and potatoes.

Notice

• To use the spatula handle to the hole of the edge of the basket to put it into or take out of the jar.
• If you want to decrease the water in the food, such as tomatoes, then take the measuring cup away and cover with the basket instead. The water can be easily removed.

Butterfly:

• Installed on the blade, the butterfly can help to mix the food but preventing from cutting by blades, and prevent the food from being adhesive together and let the food keep on mixing.
• Fix the butterfly on the blade assembly by the hole, and press it with enough force for good connection, turn the butterfly bar counterclockwise to make it locked on the blade.

Notice

• Do not start the appliance until the butterfly is fixed in place.
• Do not use above speed 4when using butterfly.
• Do not use spatula when using butterfly.
• Do not add ingredients into the jar when the appliance is working with the butterfly, or else the butterfly may be damaged or blocked.

Steamer Assembly:
There are three parts of the steamer: Small steamer, Big steamer and lid. The lid can put on both the small steamer and big steamer, and the big steamer can sit on the small steamer.

Remove the jar lid, sit the steamer on the jar.

Notice

• Please make sure that the steamer lid is covered before steaming.
• The steamer cannot be used in microwave oven or other electric appliances.
• Do not touch or get close to the holes of the steamer lid to avoid hurt by hot steam.
• Do not cover or block the holes of the steamer lid by any articles or else the steam may come out from the edge or other places and cause danger.

INSTRUCTION FOR USE
At the early stage of using this unit, there will be light smell from the motor which is normal phenomenon. After a period of time, this kind ofsmell will disappear.

• Please put the appliance on clean, stable and flat table. Do not put it too close to the edge, and keep it away from the built-in wardrobe or hanging bracket.
• It is better to put the appliance on some fixed place for your convenience.
• Please thoroughly clean the appliance before using.
• “Beep” sound shows the button has brought into effect.

STOP/ CANCEL
Get the machine plugged ,turn on the switch at the back of the machine, the machine beeps once but no display.

• Press this button, and all the back lights turn on and comes to standby mode, you can select the desired functions.
  Press this button during setting period, all setting cleared and come back to standby mode.

• Press this button during working process, and the appliance stops working immediately and come back to standby mode.

• Press this button during DIY recording process, and the appliance stop working and cancelled recording.

• The machine will turn off automatically in  30s without operation under standby  mode.

KNOB (START/ PAUSE)

• After selected the desired setting or program, press this button to start working immediately.

• Press this button during working process, the machine pause working and standby, LCD shows . (The consumer can open the lid, take away the jar, etc.
  But it must be fixed well again before re-starting). Press it again and it starts again.

• The machine will turn off automatically in 10min without operation under PAUSE status.

• It is also a knob for setting timer, speed, temperature, heat power, with increasing when turn the knob clockwise, and decreasing when turn the knob anti-clockwise, or choosing among the 15 auto programs.

TIMER

• The LCD screen shows it means hour: minute: second.
• Press timer button and the minute signal on LCD flicker; Turn the knob to adjust the minutes. Press it again, the second signal on LCD flicker, turn the knob to adjust the seconds. Press it again, the hour signal on LCD flicker, turn the knob to adjust the hours from 1-12h.
• Press the timer during working process, the machine starts to count down directly.
• Max 60min by manual setting; max 3h under DIY setting. The timer limit of each program please refer to chapter “MENU” below.

Preset

• Press Timer button ****and hold 3 seconds to enter preset / appointment setting mode. Time digit flicking together with preset logo. Use same way to set preset time from 30 minutes to 12 hours.
• Preset mode only goes with DIY or Menu. Set DIY or choose Menu firstly. Press knob after setting then time start to count down,
• Press preset to cancel.

SPEED

• Press this button in stand-by mode or during working process (except some auto programs locked the speed adjustment), the appliance gets into speed setting mode.
  The signal ****on LCD flicker, then speed is adjustable. Turn the knob to select desired speed.

• Speed range from level 1-10.

• Press this button in blending & heating process, if the temperature setting or the actual temperature is over 60℃,the speed can be only adjustable from speed 1 to 4. If it was working at high speed, it will drop to speed 4 automatically.

• There is a speed transfer on the structure, so it’s normal to hear little noise before the motor start working, or transferring the speed between level 5 and level 6.

• For crushing or chopping hard food or big volume of food, it is suggested to select speed 5 first and then turn to speed 10, to avoid vibration and achieve perfect performance.

• Please do not use speed 8,9,10 over 5 minutes each time; please do not use speed 5,6,7 over 10 minutes each time.

TEMPERATURE

• Press this button in stand-by mode or during heating process (except some auto programs locked the temperature adjustment), the appliance gets into temperature setting mode. The signal on LCD flicker, then temperature is adjustable. Turn the knob to select desired temperature.
• Temperature range: 37-120℃

HEAT POWER

• Press this button in stand-by mode or during heating process (except some auto programs locked the heat power adjustment), the appliance gets into temperature setting mode.

The signal on LCD flicker, then heat poweris adjustable. Turn the knob to select desired heat power.

• Heat power range from level 1-10.
• For some sticky food, it is suggested to select low heat power to avoid being burnt at the bottom.
• If food volume is small and it requires precise temperature, it is suggested to select low heat power.
• Low power will be more precise control; High power will heat quicker.
• It will not work if just select the heat power but no temperature selected. It is suggested to follow the default setting when choosing different temperature levels.

SELF-CLEANING

• This program is for cleaning purpose after use.
• Add water from 500ml to 1 liter.
• Some detergent will be helpful
• Whole process takes around 10 minutes

TURBO

• Press and hold this button at standby mode, the machine starts working at maximum speed, release and it stop immediately
• When the temperature in the jar is over 60℃, PULSE cannot be used, and the screen will show E11.
• There is a speed transfer on the structure, so it’s normal to hear little noise before the motor start working at the first pulse.
• Maximum operation time for Pulse is 3 min and then rest for 10 minutes

MENU

• This button is to choose among the below 10 auto programs.

CHOP（HACHER）

STEW（MIJOTE2）
STEAM（VAPEUR）

THICK SOUP（VELOUTE)

QUICK SOUP（SOUPE）

STIR（SAUCE）
KNEAD（PETRIR）
RISOTTO (Rice)

SMOOTHIE
YOGURT（YAOURT）

• Press this button in standby mode, the SMOOTHIE signal on LCD starts flicker turn the knob to choose the desired program.
• For the program QUICK SOUP, THICK SOUP, STIR, STEW, RICE, , after completed, it will show “End”. If no operation after 10 minutes, it will turn to KEEP WARM automatically for 12 hours until manually stopped.

Some default setting of the program is adjustable, and it shows the real data on the screen; some of them are blocked and it shows “–” on the screen, as following form

*Temperature: 0

*Heat power: 0

*Timer: 1min

| *To crush but not to be smoothie. Time adjustable from 1s-5min for desired consistency.

*If left idle for 10 minutes after program completion, machine will turn off automatically

| *Suggested chopped size of the ingredients with hard articles like carrot, meat is 1-2cm.

*If you need to crush the food to be the finest, please use SMOOTHIE

| Step 1:

Speed: 0
Temperautre:100℃
Heat power: 10
Timer: no limit, until boil

| |
STEW|

Step 2:

Speed: 0
Temperature: 90- 95℃
Heat power: no certain, may change automatically according to the temperature and food volume
Timer: 3h

| *Default timer 3h, adjustable
from 1-12h

*If left idle for 10 minutes after program completion, machine will automatically enter ‘WARM’ mode.

| Slow cook
STEAM| Speed: 0

*Temperature: 120℃

*Heat power: 10

*Timer: 20min

|

*Time adjustable from 15-60m

*If left idle for 10 minutes after program completion, machine will automatically enter ‘WARM’ mode.

|

*500g of water for every 30 minutes of steaming

*Vegetable 20min; meat 30min

---|---|---|---
| Step 1:

*Speed: 0

*Temperature: 120

*Heat power: 10

*Timer: Till Boil

| |
| Step 2:

*Speed: 0

| |
| *Temperature: 100℃

*Heat power: 4

*Timer: 29.5min

| *Suitable for meat soup, crush first and then cook and stir.

Timer adjustable from 15-60m.

| *Suggested chopped size of the ingredients with hard articles like carrot, meat is 1-2cm
THICK

SOUP

|

Step 3:

*Speed: 0

*Temperature: 0℃

*Heat power: 0

*Timer: Cooling down to 80℃

| If left idle for 10 minutes after program completion, machine will automatically enter ‘WARM’ mode.| Suggest to pause and add butterfly after Step 1.
| Step 4:

*Speed: slowly from 6 to 10

*Temperature: 0℃

*Heat power: 0

*Timer: 1 min

| |
QUICK SOUP| Step 1:

*Speed: 10

*Temperature: 0

*Heat power: 0

Step 2:

*Speed: 2

*Temperature: 120℃

| *Suitable for vegetable soup, crush first and then cook and stir. Timer adjustable from 15- 60m.

*If left idle for 10 minutes after program completion, machine will automatically enter ‘WARM’ mode.

| *Suggested chopped size of the ingredients with hard articles like carrot, meat is 1-2cm

*Suggest to pause and add butterfly after Step 1.

| *Heat power: 10

*Timer: Till boiling

Step 3:

*Speed: 2

*Temperature: 100℃

*Heat power: 10

*Timer: 19.5min

| |
---|---|---|---
STIR| *Speed: 2

*Temperature: 100℃

*Heat power: 10

*Timer: 30min

| *Speed adjustable from level 0- 3;

*Temperature adjustable from 90-120℃.

*Time adjustable from 5-60m

If left idle for 10 minutes after program completion, machine will automatically enter ‘WARM’ mode.

| *Use butterfly or kneading blade
KNEAD| Step 1:

*Speed: 3

*Temperature: 0

*Heat power: 0

*Timer: 3min

Step 2:

*Speed: 2

*Temperature: 0

*Heat power: 0

*Timer: 7min

| *Speed adjustable from level 2- 3;

*Temperature adjustable at 0 or 37℃ for spreading.

*Time adjustable from 3-20m

*If left idle for 10 minutes after program completion, machine will turn off automatically

| *Knead for bread: 330g water + 500g flour + other ingredients; knead 10min by default setting

*Knead for noodle: 200g water + 400g flour; knead 3min by speed 2

*Set temperature 37℃ for spreading, and if it doesn’t spread enough, choose 37℃ for 30min more without

speed

RISOTTO| Step 1:

*Speed: 0

*Temperautre:100℃

*Heat power: 6

*Timer: Till boiling

Step 1:

*Speed: 1

*Temperautre:965℃

| *All setting non-adjustable

*If left idle for 10 minutes after program completion, machine will automatically enter ‘WARM’ mode.

| *Suggested volume (max): 500g rice + 800g water, run RICE by default setting.

Rice crust will form at the bottom.

*Or steam rice by setting: 400g rice in the filter basket, 2L

water, choose BOIL;

| *Heat power: 4

*Timer: 18 Min

Heat power & Timer: not certain, may adjust automatically according to the temperature and volume

| | then pour out some water with 1L left, choose STEAM for 20min
---|---|---|---
SMOOTHIE| *Speed: 10

*Temperature: 0

*Heat power: 0

*Timer: 30s

| *All setting non-adjustable, run once more if not fine enough.

*If left idle for 10 minutes after program completion, machine will turn off automatically

| Suggested chopped size of the ingredients with hard articles like carrot, meat is 1-2cm
YOGURT| *Speed: 1 at the first 30min, and then stop

*Temperature: 37- 39℃

*Heat power: 1

*Timer: 6h

| *Time adjustable from 3-12h

*If left idle for 10 minutes after program completion, machine will turn off automatically

|

*Suggested volume: 1 cup yogurt + 1L fresh milk + sugar, 6-12h according to desired consistency

Suggested speed and capacity for each components:

Tools| Picture| Function| Speed| Capacity| Operation time
---|---|---|---|---|---
Cutting blade| | CHOP but not being smoothie| 5| 2L max, chop to be 1-2cm size before operation| 1min
CHOP to be finest| 10| 2L max, chop to be 1-2cm size

before operation

| 1min
Kneading blade|

| Knead dough for bread, pizza, etc.| 2-3| 800g flour max| 5-10min
Knead dough for noodles| 2| 500g flour max| 3min
Butterfly|

| Stir| 1-3| 2L max| 30min
whisk egg whites or cream| 4| 2L max| 10min
Steamer|

| Steam vegetables| N/A| 3.5L max| 15min
Steam meat| N/A| 3.5L max| 20-30min

TROUBLE-SHOOTING

• The below error information appeared on the screen is normal. If it still appears the problem after you acted according to the solution below, please contact our customer service center.

Cleaning your appliance

1. DO NOT was any parts of your cooker in a dishwasher. Always wash the cooker thoroughly after every use, or it has not been used for an extended period of time.
2. Unplug the appliance from the wall outlet and let the unit cool before cleaning.
3. Wash the removable cooking pot with warm soapy water. Rinse and dry thoroughly.
4. Wipe main body with a clean damp cloth. If food residue remains, dampen cloth in warm soapy water before wiping. NEVER submerge the main body in water or other liquid. Wipe the stationary pot as necessary to remove any food product.
5. In order to maintain good performance of you …soup maker, the bottom of the removable cooking pot should be inspected and cleaned, if necessary, after each use. Wipe with a soft damp cloth and dry thoroughly before using.
6. If the soup maker is not used for a period of time, please unplug it and keep in cool and clean area.

FIND ALL OUR RECIPES:
http://dl.hkoenig.com/SiteHkoenig/Livrederecettes_HK8.pdf

Or scan here:

DISPOSAL AND ENVIRONMENT
If your electrical appliance requires replacement or is of no further use, please think of protecting the environment. Contact your local authority for advice as many have facilities for environmentally safe disposal

Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

COPYRIGHT
Our company will keep the right of the documentation, design and picture description. Without the approval of the copyright owner, the publication should not be allowed to be reprinted or communicated in the form of electronic information (photograph or video).
Adeva SAS / H.Koenig Europe – 8 rue Marc Seguin, 77290 Mitry-Mory, France
– https://en.hkoenig.com – Tél: +33 1 64 67 00 05

References

• H.Koenig : Le spécialiste du petit électroménager
• HKOENIG SAV: Pezzi di ricambio, accessori, FAQ
• H.Koenig customer support
• HKOENIG SAV: Repuestos, accesorios, FAQ
• HKOENIG SAV: Pièces détachées ,accessoires, FAQ

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>