LD Systems EasyMount+ Truss Mount for MAILA SPA and MAILA COL Instruction Manual

: June 10, 2024
: LD Systems

Table of Contents

LD Systems EasyMount+ Truss Mount for MAILA SPA and MAILA COL
Product Information
SPECIFICATIONS
Assembly Instructions
Fit the Crossbar Clamp and Shackle Bracket
MOUNTING THE FLYING BRACKET
Documents / Resources

LD Systems EasyMount+ Truss Mount for MAILA SPA and MAILA COL

SAFETY INFORMATION

Please read these instructions carefully before you start installation and assembly.
Keep all information and instructions in a safe place.
Follow the instructions.
Only use the accessories in the manner intended.
Do not change the flight bracket.
CHOKING HAZARD! KEEP OUT OF THE REACH OF CHILDREN! THE PRODUCT CONTAINS SMALL PARTS THAT CAN BE SWALLOWED AS WELL AS PACKAGING MATERIAL THAT CAN BE SWALLOWED! PLASTIC BAGS MUST BE KEPT OUT OF THE REACH OF CHILDREN!

Product Information

The product is a flying bracket used to suspend equipment such as speakers or lights. It has a crossbar clamp and shackle bracket made of a material that is not specified. It has a maximum load capacity and maximum tilt angle that is not specified. The weight of the product is also not specified. This item is a product-specific system component intended exclusively for use with the LD MAILA COL speaker column and the LD MAILA SPA amplifier module. These installation instructions do not replace the operating instructions for the associated products. Always read the relevant operating instructions first. These accessories have no influence on the intended use of the associated product. Observe the safety instructions from the operating instructions of the associated product! The technical data shown in the operating instructions may change in connection with this item.

PACKAGING CONTENT

1 x LD MAILA EasyMount+® flying bracket
1 x truss clamp with M10 fixing screw and washer
1 x shackle adapter with two M8 fixing screws and washers
Assembly instructions

DISPOSAL
Packing :

Packaging can be fed into the recycling system via the usual disposal channels.
Please separate the packaging according to the disposal laws and recycling regulations in your country.

Product: Dispose of the product in accordance with the disposal regulations in force in your country.

MANUFACTURER’S DECLARATIONS

MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY Adam Hall GmbH, Adam-Hall- Str. 1, D-61267 Neu Anspach
E-Mail:Info@adamhall.com / +49 (0)6081 / 9419-0.
Our current warranty conditions and limitation of liability can be found at: https://cdn-shop.adamhall.com/media/pdf/MANUFACTURERS- DECLARATIONS_LD_SYSTEMS.pdf
In case of service, please contact your sales partner.

UKCA- CONFORMITY
Hereby, Adam Hall Ltd. declares that this product meets the following guidelines (where applicable)
Electrical Equipment (Safety) Regulations 2016
Electromagnetic Compatibility Regulations 2016 (SI 2016/1091)
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic

Equipment
Regulation 2012 (SI 2012/3032)
Radio Equipment Regulations 201 7(SI 2016/2015)

UKCA- DECLARATION OF CONFORMITY
Products that are subject to Electrical Equipment(Safety)Regulation 2016, EMC Regulation 2016 or RoHS Regulation can be requested at info@adamhall.com. Products that are subject to the Radio Equipments Regulations 2017 (SI2017/1206) can be downloaded from www.adamhall.com/compliance/

SPECIFICATIONS

Model name: LDMAILATMB
Product name: MAILA EasyMount+®
Product type: Loudspeaker accessories
Type: Flying bracket for truss and shackle mounting
Material, Surface, Color: Steel, Powder-coated, Black
Max. load capacity: 105 kg
Max. tilt angle: 15°
Weight: 4,3 kg (inkl. Truss clamp)

Assembly Instructions

Safety Information: Before starting the installation and assembly, read the instructions carefully and keep them in a safe place. Follow the instructions and only use the accessories as intended. Do not change the flight bracket. Keep the product and packaging material out of the reach of children as they contain small parts that can be swallowed.

Fit the Crossbar Clamp and Shackle Bracket

Fit the crossbar clamp to the flying bracket: Use a liquid screw adhesive, medium strength, to secure the screw connection. Place the crossbar clamp on the flying bracket and screw it to the flying bracket using the enclosed M10 hexagon socket screw and washer with a tightening torque of 50 Nm. If replacing the screw, ensure that the screw has a strength class of at least 8.8.
Fit the shackle holder to the flying bracket: Use a liquid screw adhesive, medium strength, to secure the screw connections. Place the shackle bracket on the flying bow and screw it to the flying bow using the two enclosed M8 hexagon socket screws and washers with a tightening torque of 25 Nm each.

MOUNTING THE FLYING BRACKET

Before mounting, make sure that the flying bracket and the speaker column or amplifier module are complete and intact! To mount the EasyMount+ flying bracket on the MAILA COL speaker column or the MAILA SPA amplifier module, insert all three steel hooks of the flying bracket into the corresponding retaining sockets of the unit housing. Now slide the entire flying bracket in the direction of the rear of the housing. When installing the mounting bracket, ensure that the spring-loaded locking pins engage fully. Ensure that locking pins are functioning correctly before every installation. For safety reasons, both locking pins must be pulled upwards simultaneously to release the connection (two-hand release).

HANGING POINT

The optimum suspension point for truss mounting is displayed after entering the corresponding data in the menu item SPLAY ANGLES under PICK. There are corresponding markings on the retaining rail of the flying bracket. Set up the hanging point shown before mounting the flying bracket with amplifier module or speaker column on a truss. To move the suspension point, release the spring-loaded locking bolt (Fig. A , pull the knob to the side), slide the bracket to the desired point and snap the locking bolt back into place. To change the direction of radiation on the horizontal plane, slide the spring- loaded locking sleeve down about one centimetre and then turn the flying bracket to the desired position (Fig. B ). Now let the locking sleeve snap back into place.

WARNING
The angle of inclination of the flying bracket must not exceed 15°! This maximum value will not be exceeded with any of the possible combinations of speaker column COL or amplifier module SPA and satellite SAT when mounted correctly. Do not try to increase the angle of inclination by using e.g. tensioning straps for this purpose!

Documents / Resources

| LD Systems EasyMount+ Truss Mount for MAILA SPA and MAILA COL [pdf] Instruction Manual
EasyMount, EasyMount Truss Mount for MAILA SPA and MAILA COL, Truss Mount for MAILA SPA and MAILA COL, MAILA SPA and MAILA COL
---|---