Whynter BBR-801BG Built-in Glass Beverage Refrigerator Instruction Manual

Whynter BBR-801BG Built-in Glass Beverage Refrigerator Instruction Manual

APPLIANCE SAFETY

Your safety and the safety of others are very important to us

To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic precautions

This is the Safety Alert Symbol. This symbol alerts you to potential hazards that may result in serious injury. All safety messages will follow the Safety Alert Symbol and either the words” DANGER” or “WARNING”.

Danger means that failure to heed this safety statement may result in severe injury or death.
Warning means that failure to heed this safety statement may result in extensive product dam- age, serious injury, or death.
Caution means that failure to heed this safetystatement may result in minor or moderate injury, or property or equipment damage.

All safety messages will alert you to know what the potential hazard is, tell you how to reduce the chance of injury, and let you know what can happen if the instructions are not followed.

IMPORTANT SAFEGUIDES

Before the appliance is used, it must be properly positioned and installed as de- scribed in this manual, please read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the appliance, follow basic precaution, including the following

Danger

• Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do not use an extension

• Do not use if the power supply cord is damaged. If damaged, it must be replaced by a qualified electri-

• It is recommended that a separate circuit, serving only your appliance be Use receptacles that cannot be turned off by a switch or pull chain.

• Never clean appliance parts with flammable fluids or harsh These fumes can create a fire hazard or explosion.

• Do not store or use gasoline or other flammable vapors and liquids in the vicinity of the appliance or any other

• Before proceeding with cleaning and maintenance operations, make sure to unplug the

• Do not connect or disconnect the electric plug with wet

• Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in this All other servicing should be referred to a qualified technician.

• This appliance is CFC- and HFC-free and contains small quantities of Isobutane (R134A) which is environ- mentally friendly, but flammable. It does not damage the ozone layer, nor does it increase the greenhouse Care must be taken during transportation and setting up of the appliance that no parts of the cooling system are damaged. Leaking coolant can ignite and may damage the eyes. In the event of leakage:

• Avoid open flames and anything which creates a spark

• Disconnect from the mains

• Air the room in which the appliance is located for several minutes and contact the Service Department for advice

Warning

• Use two or more people to move and install the Failure to do so can result in injury.

• To ensure proper ventilation for your appliance, the front of the appliance must be completely unobstruct- Choose a well-ventilated area with temperatures above 60°F (16°C) and below 90°F (32°C). This ap- pliance must be installed in an area protected from the element, such as wind, rain, water spray or drips.

• The appliance should not be located next to ovens, grills or other sources of high

• The appliance must be installed with all electrical connections in accordance with state and local

• The fuse (or circuit breaker) size should be 15

• It is important for the appliance to be leveled in order to work For a stable installation, make sure the appliance is placed on a flat, level and solid surface.

• Ensure that the surface on which the appliance is placed is strong enough to hold the appliance and the items stored

• This appliance is not intended for use by young children or physically-challenged persons without supervi- sion/assistance. Young children must be supervised to ensure safety around this or any

• Do not use solvent-based cleaning agents of abrasives on the These cleaners may damage or discolor the interior.

• Keep fingers out of the “pinch point” Clearance between the door and between the doors and cabi- net are necessarily small. Be careful closing doors when children are in the area.

• This beverage refrigerator is designed for storing and cooling If food is stored inside, ensure that there is sufficient airflow between items. Please note that the temperature range for this beverage

• refrigerator is optimized for beverage storage. Perishable food items may require a different storage envi- ronment.

• Do not place hot food or beverages into the

• Close the beverage refrigerator door immediately after putting in any items to keep the internal tempera- ture relatively

• Avoid placing any objects on top of the

• This is an electrical appliance, to avoid injury from electrical shock do not operate the unit with wet hands, while standing on a wet surface or while standing in Do not use outdoors or in wet conditions.

• When positioning or moving the appliance, ensure that it is not turned up side down or unleveled greater than 45°

• Never pull the power cord to disconnect it from the Grasp the plug and pull it from the outlet.

• Never lift, carry or drag the appliance by the power

• This appliance is designed for household, non-commercial use Any other use will void the warranty.

• Do not plug into the power outlet before set up is

• Do not move this appliance without emptying it and securing the door in a closed

part

Product Features

Unlike many beverage refrigerators, the Whynter Built-in Black Glass 80-can capacity 3.4 cu ft. Beverage Refrigerator utilizes premium features and design to provide a sleek showcase that will be centerpiece of any space. With its powerful compressor and internal air-cooled system, this beverage refrigerator creates an evenly-cooled space ensuring consistent temperatures throughout the beverage refrigerator.

With its sleek black trimmed glass door and soft LED lighting, the BBR-801BG allows you to see view the contents while maintaining internal temperatures and increasing energy efficiency. This unit is also equipped with a lock to keep your beverages safe and secure. The door swing direction is also reversible for customi- zation to your specific requirements.

• 80 standard 12 can
• Built-in or Freestanding installation
• Sleek black cabinet and interior
• Environmentally friendly refrigerant
• Tempered double pane gray-smoked glass for enhanced UV protection
• Soft interior LED lighting with on/off switch
• Powerful fan-circulated compressor cooling ensures even temperature distribution
• Auto defrost
• Cylinder lock and two keys
• Reversible door swing
• Fahrenheit and Celsius degree temperature indicators
• 4 removable flat slide out shelves

TECHNICAL DATA

IMPORTANT SAFETY INSTRUCTIONS

WARNING

| To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic pre-

cautions:

---|---
·        Read all instructions before using the appliance.

·     DANGER or WARNING: An empty beverage refrigerator can be a hazardous for children or small pets. If disposing of the beverage refrigerator, remove gasket seals, latches, lids or the entire door from your unused appliance, or take other action to ensure the beverage refrigerator is harmless.

·        Never allow children to operate, play with, or crawl inside the appliance.

·        Never clean appliance parts with flammable fluids or harsh chemicals. The fumes can create a fire hazard or explosion.

·        Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other ap- pliance. The fumes can create a fire hazard or explosion.

INSTALLATION INSTRUCTIONS

BEFORE USING YOUR APPLIANCE

• Remove the exterior and interior
• Before connecting the appliance to the power source, let it stand upright for approximately 4 This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
• Clean the interior surface with lukewarm water using a soft
• Install the handle on the

INSTALLATION OF YOUR APPLIANCE

• The appliance is designed for built-in, recessed or free standing
• WARNING : Do not store or install the appliance
• CAUTION : This appliance is designed This beverage refrigerator is designed for storing and cooling beverag- Do not store perishable food, medicine or other medical products.
• Place your appliance on a hard and level floor that is strong enough to support it when it is fully
• We do not recommend installing the appliance on
• To level your appliance, adjust the leveling legs at the bottom of the appliance if
• For free standing installation, 5 inches (127mm) of space between the back and sides of the appliance are suggested, which allows the proper air circulation to cool the compressor and condenser. Even for built-in in- stallation, it is a must to keep a ¼” (6.35mm) space on each side and at the And the air vent at the front of the appliance must never be covered or blocked in any way.
• NOTE: Do NOT install the appliance near an oven or other heating source. Direct sunlight may affect the acrylic coating and heat sources may increase electrical For best performance, do not install the appliance behind a cabinet door or block the base grille.
• Avoid locating the appliance in area that may be exposed to excessive
• Plug in the appliance into an exclusive, grounded wall power Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a qualified electrician or an authorized service center.

BUILT-IN CABINET INSTRUCTIONS

These appliances are designed for both built-in or free standing installation. For built-in installation, ensure proper service access and ventilation, allow at least ¼” space on each side and at the top.

CABINET OPENING DIMENSIONS (minimum)

Width| 15”
Depth| 23¼”
Height| 35 1/4″

ELECTRICAL CONNECTION

This appliance requires a standard 115/120 Volt AC ~/60Hz electrical ground outlet with three-prong. Have
the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded. The cord should be secured behind the appliance and not left exposed or dangling to prevent accidental injury.
The appliance should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating label on the appliance. This provides the best performance and also prevent over-
loading house wiring circuits that could cause a fire hazard from overheated. Never unplug the appliance by pulling the power cord. Always grip the plug firmly and pull straight out from the receptacle. Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. When moving the appliance, be careful not to damage the power cord.

EXTENSION CORD

Because of potential safety hazards, it is strongly recommended that you do not use an extension cord with this appliance. However, if you must use an extension cord, it is absolutely necessary that it be a UL/CUL- Listed, 3-wire grounding type appliance extension cord having a grounding type plug and outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes.

REVERSING THE DOOR SWING OF YOUR BEVERAGE REFRIGERATOR

Note: All parts removed must be saved for proper reinstallation of the door.

__ This appliance has the capability of the door opening from either the left or right side. The appliance is deliv- ered to you with the door opening from the left side. Should you desire to reverse the opening direction, please follow the following reversal instructions.

1. Remove the front ventilation grille (2) and the adjustable ventilation grille (1) by unscrewing the screws (3) & (4). (Figure 1)

2. Remove the bottom hinge plate (5) by unscrewing the four lock screws (6). Be careful to hold the glass door firmly after removing the (Figure 2)

3. Gently pull down to remove the glass door from the right top hinge and place it on a padded surface to avoid the risk of damage, then remove the right top hinge (7). (Figures 3 & 4)

4. Unscrew and transfer the hinge pin of the bottom hinge plate (5) to the opposite

5. Pop out the cover caps on the upper left side corner of the inside cabinet and use them to cover the screw holes on the right hand

6. Screw the alternative left top hinge (9), included in the fittings, on the left hand side of (Figure 4)

7. Rotate the door 180° and then relocate the door to the designated Then screw the bottom hinge assembly on the left designated position and tighten it after the door is leveled. (Figure 2)

8. Reassemble the ventilation
   

Operation and Controls

It is recommended you install the appliance in a place where the ambient temperature is between 72º- 78ºF / 23º-26ºC. If the ambient temperature is above or below recommended temperatures, the performance of the beverage refrigerator may be affected. For example, placing your appliance in extreme cold or hot conditions may cause interior temperatures to fluctuate.

NOTE:

• When using the beverage refrigerator for the first time or restarting after being shut off for a long period of time, there may be a few degree variance between the set temperature and the LED readout. This is nor- mal due the length of activation time. The unit should return to normal after running for a few hours. This unit will not raise its internal temperature if the ambient temperature where the unit is located is lower than the set

CONTROL PANEL GUIDE

• POWER

To turn the appliance on/off, press and hold the power key for 5 seconds.

·      UP

To increase (warm) the set temperature by 1°C or 1ºF.

·     DOWN

To decrease (cool) the set temperature by 1°C or 1ºF.

·     LIGHT

Used to turn the internal light on/off.

ºF/ºC SELECTOR

Select the temperature display setting in Fahrenheit or Celsius degree. To change the temperature from Fahrenheit to Celsius or from Celsius to Fahrenheit, press and hold the LIGHT key for 5 seconds.
NOTE : If the appliance is unplugged, encounter power interruption, or turned off, you must wait 3 -5 minutes before restarting the appliance. If attempted to restart before this time delay, the appliance may not start.

__SETTING THE TEMPERATURE CONTROL

• During normal operation, the temperature display on the control panel shows the temperature inside the
• When the unit is plugged in for the first time, the unit will power up automatically to the preset The preset temperature is 40ºF (4ºC).
• You can press the UP and DOWN keys to control the internal temperature of the
• The temperature that you desire to set will increase 1ºC or 1ºF if you press the UP key once and will de- crease 1ºC or 1ºF if you press the DOWN key The display flashes while you make the setting.
• After the temperature has been set, the display will flash four times before it shows the current internal temperature of the particular temperature zone.
• To view the set temperature at any time, press the UP or DOWN key, the set temperature will temporarily flash in the display for 5 Then the display shows the current internal temperature again.

Operation and Controls

TEMPERATURE MEMORY FUNCTION

In the event of a power interruption (power surge, breaker switch, etc.), the unit can remember the previous tem- perature settings. When the power has restored, the temperature display will show the current cabinet temperature.

INTERIOR LIGHT

The interior light makes it easy to view your beverage labels and enhances the display of your collection. The light can be turned on or off pressing the light button on the display.

CABINET SHELVES

NOTE: Do not cover any part of the shelves with aluminum foil or any other material that will prevent adequate air circulation within the cabinet.

This appliance is equipped with removable shelves. To prevent damage to the door gasket, make sure the door is opened completely before pulling the shelves out.

• For easy access of the beverage cans, you must pull the shelves approximately ⅓ out of the
• The shelves are designed with an emergency stop to prevent them being removed too far when
• When removing the shelves out of the railing, make sure to remove all items
• To remove the shelves, pull the shelf forward until the notch aligns with the plastic post. Lift the shelf and con- tinue to pull the shelf forward until it is completely removed from the internal

NORMAL SOUNDS

The unit is cooled by a compressor. The compressor pumps coolant through the cooling system, producing operat- ing noise. Even when the compressor cuts out, noises caused by changes in temperature and pressure are una- voidable. Operating noise will be most audible immediately after the compressor comes on. It becomes quieter as the operating period continues.
The following noises are normal and occur from time to time:

• Gurgling sound, caused by the refrigerant flowing through the appliance’s coils,
• Humming noise made by the This noise can get louder for brief periods when the motor is switch- ing on.
• Cracking/popping sounds, resulting from the materials contraction and expansion due to temperature varia- tions,
• Fan operating sound, to circulate the air within the beverage
• Unusual noise is normally the result of improper
• Where the unit is installed in open-plan kitchen or in partition walls, the level of operating noise will be heard more However, this is due to the surrounding architecture and not to the unit.

NOTE: An individual’s perception of noise is directly linked to the environment in which the unit is lo- cated, as well the specific type of models. Our appliances are in line with international standards for such ap- pliance and in line with the latest technical developments. Please remember that the noise of the compressor and the coolant circulating in the system is unavoidable.

__DEFROSTING AND VENTILATION

Your beverage refrigerator is designed with an automatic defrost system. During off-cycle, the evaporator be- hind the rear wall of the unit defrosts automatically. Condensation is collected in the drain at the back of the unit and flows through the drainage hole into the drip tray above the compressor. The heat is transferred from compressor and evaporates any condensation that has collected in the drip tray. Part of the remaining water within the beverage refrigerator is collected for humidity purposes.
NOTE: Frost may accumulate on the evaporator if the unit is repeatedly opened in a high heat or high humidity location. If this frost pattern does not clear within 24 hours, your unit will require manual defrosting.

STORAGE

Storage

Beverage cans may differ in size and dimensions so the actual number of cans can be stored may vary. The 80- can capacity is the approximate maximum when storing traditional 12 oz. cans and includes bulk storage.
You may load your beverage cans in single row or by stacking while taking note of the following: if you do not have enough cans to fill your beverage refrigerator, it is better to distribute the load throughout the beverage refrigerator so as to avoid “all on top” or “all below” type loads.

• You can remove or relocate adjustable shelves to accommodate larger type of bottles (see removing shelves)
• Keep small gaps between the walls and the bottles to allow air
• Do not over load your beverage refrigerator
• Avoid obstructing the internal fans (located inside on the back panel of the beverage refrigerator).
• Do not try to slide the shelves outwards beyond the fixed position to prevent the bottles from
• Do not pull out more than one loaded shelf at a time as this may cause the beverage refrigerator to tilt for- ward if not properly

REMOVING SHELVES

• To remove any of the shelves from the rail compartment, move the shelf to the position where the notch of shelf is exactly under the plastic post and then lift it up and
• In order to replace the shelf, repeat steps described above in And make sure to engage the shelves with the small pegs of the extended rails when the model is equipped with roller system.
  

Care and Maintenance

CAUTION: Failure to unplug the appliance during service could result in electrical shock or personal injury.

CLEANING YOUR APPLIANCE

• Turn off the power, unplug the appliance, and remove all items including
• Wipe the interior with a warm water and baking soda The solution should be about 2 tablespoons of baking soda to one quart of water.
• Wipe the shelves with a mild detergent
• Wipe the outside cabinet with warm water and mild liquid
• Do not use steel wool or steel brush on the stainless These will erode the stainless steel and rusting may occur.

PREMISES POWER FAILURE

• In the event of a power interruption, all previous temperature settings are automatically memorized. If power is interrupted (power surge, breaker switch, ) and then powered up again, the unit will operate with the last temperature set-point.
• Most power failures are corrected within a few hours and should not affect the temperature of your appliance if you minimize the number of times the door is opened. If the power is going to be off for a longer period of time, you need to take the proper steps to protect your

VACATION TIME

• Short vacations: Leave the appliance operating during vacations of less than two days
• Long vacations: If the appliance will not be used for an extended period, remove all items and turn off the Clean and dry the interior thoroughly.

MOVING YOUR APPLIANCE

• Remove all items inside the
• Securely tape down (we recommend using painter’s tape) all loose items (shelves) inside your
• Turn the adjustable leg up to the base to avoid
• Tape (we recommend using painter’s tape) the door
• Be sure the appliance stays secure in the upright position during transportation and protect the exterior of appliance with a blanket, or similar

ENERGY SAVING TIPS

• The appliance should be located in the coolest area of the room, away from heat producing appliances, and out of any direct
• Ensure that the appliance is adequately Never obstruct the air vents.
• Close the door tightly and do not open the appliance too frequently or for a long period of
• Store the content in an organized way
• Do not over-fill the appliance to allow air to circulate

·        The appliance is not plugged in

·        A house fuse has blown or the circuit breaker is tripped

| ·        Ensure the appliance is plugged in and the power outlet has power

·        Replace the broken fuse or reset the breaker

The appliance is not cold enough| ·        The set temperature too high

·        The appliance is placed too close to a heat source

·        The door is opened too often

·        The door is not closed completely

·        The door gasket does not seal properly

·        The front bottom grille does not have sufficient ventilation

| ·        Adjust the set temperature

·        Keep the appliance away from sun- shine or other heat sources

·        Close the door tightly and do not open the door too frequently or for a long period of time

·        Ensure the door gasket is not loose. The front bottom grille must be com- pletely unobstructed

The appliance turns itself on and off frequently| ·        The ambient (room) temperature is too low or high

·        A large amount of contents has been added to the appliance

·        The door is opened too often

·        The door is not closed completely

·        The door gasket does not seal properly

| ·        Decrease or increase the ambient (room) temperature

·        To minimize internal temperature fluc- tuation, do not add large amount of contents at once

·        Close the door tightly and do not open the door too frequently or for a long period of time

·        Ensure the door gasket is not loose

The appliance makes too much noise| ·        The noise may come from the flow of the refrigerant and expan- sion of the inside walls may cause popping and crackling noises

·        Contraction and expansion of the inside walls may cause popping and crackling noises

·        The appliance is not level

| ·        It is normal that as each cooling cycle ends, you may hear rattling or gurgling sounds caused by the flow of refriger- ant in the appliance. The high efficien- cy compressor may make a pulsating or high pitched sound

·        Some popping or cracking noises are normal. They are caused by expansion and contraction of the inside walls due to temperature changes

·        Make sure the unit is on a hard and level surface. Do not place the appli- ance on carpet

·        See Operating Noises

The door does not close properly| ·        The appliance is not level

·        The door was reversed and not properly installed

·        The shelves are out of position

| ·        Make sure the beverage refrigerator is on a hard and level surface. Avoid placing the appliance on a carpeted or soft surface

·        Correctly install the shelves

Display “E0”, “E1”. “E2”,

“E3”, “E4”, “E5” or “E7”

| ·        “E0” indicates the communication error

·        “E1” or “E2” indicates that the air temperature sensor is failed

·        “E3” or “E4” indicates that the de- frost sensor in the evaporator is failed

·        E5” indicates the defrost heater fail- ure

·        E7” indicates the door switch failure

| ·        Call for service
The icon “–” is lit up and flashing in the temperature display| ·        The display temperature is out of the range| ·        Only temperatures within the range 16~99°F/-9~37°C the appliance can display will be shown. If the tempera-

ture is not within this range, the icon “– ” will be displayed instead. That is nor- mal

ONE YEAR LIMITED WARRANTY

**** This WHYNTER Beverage Refrigerator is warranted, to the original owner within the 48 continental states, for one year from the date of purchase against defects in material and workmanship under normal use and service. When making a warranty claim, please have the original bill or invoice of purchase with purchase date available. Should your WHYNTER Beverage Refrigerator prove defective within one year from the date of purchase, return the de- fective part or unit, freight prepaid (within two months of purchase; after two months to one year, customer will be responsible for freight cost to Whynter’s service department), along with an explanation of the claim to Whynter LLC. A return authorization number issued by Whynter is required for all warranty claims and returns. Please package the WHYNTER Beverage Refrigerator carefully in its original packaging material to avoid damage in
transit. The original box and packaging material should be retained, as Whynter is not responsible for the cost of replacement packaging. Under this warranty, Whynter will repair or replace any parts found defective at our
discretion. This warranty is not transferable. After the expiration of the warranty, the cost of labor and parts will be the responsibility of the original owner of the unit.

THIS WARRANTY DOES NOT COVER:

• Acts of God, such as fire, flood, hurricanes, earthquakes and
• Improper power supply such as power surge, low voltage, defective household wiring or inadequate fuses.
• Use in commercial or industrial applications
• Damage, accidental or otherwise, to the WHYNTER Beverage Refrigerator while in the possession of a consumer not caused by a defect in material or workmanship;
• Damage caused by consumer misuse, tampering, or failure to follow the care and special handling provisions in the
• Damage to the finish of the case, or other appearance parts caused by
• Damage caused by repairs or alterations to the product by anyone other than authorized by the
• Removal, Replacement Packaging, Freight and Insurance cost for the warranty

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES CUSTOMER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR OR REPLACEMENT AS PRO-
VIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTA- BILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PE- RIOD ALLOWED BY LAW, BUT NOT LESS THAN ONE YEAR. WHYNTER SHALL NOT BE LIABLE FOR CON- SEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN LIMITED WARRANTY OR ANY IMPLIED WARRANTY. SOME STATES AND PROVINCES DO NOT AL- LOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES, SO THESE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WRIT-TEN WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.

Please retain the original proof of purchase in order to obtain warranty services.
Warranty begins from the original date of purchase.
To obtain service or information, contact
Whynter LLC via email at support@whynter.com or call 866-WHYNTER.
Product contents and specifications may change without notice.
Copyright © 2016 Whynter LLC WWW.WHYNTER.COM

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>