RADDY RF320 Shortwave Radio Instruction Manual

: June 10, 2024
: RADDY

Table of Contents

Instructions for APP Installation
Description of Symbols on APP Interface
Working Modes on APP Interface
Documents / Resources

RF320 Shortwave Radio
Instruction Manual

Instructions for APP Installation

Step 1: turn on the radio RF320
Step 2: download the APP
Android System: Use your mobile browser to scan the following QR code to download the APP iOS System: Go to “App Store” and search “Radio-CT” to download the App

http://www.szdipusi.cn/file/Radio-c.apk
https://apps.apple.com/us/app/radio-ct/id6444934834

2.1: Click “download” →Click “continue” →Installation finished, click “open the app” →APP icon is displayed

RADDY RF320 Shortwave Radio - fig

2.2: Click the APP icon to enter and use →Click the Bluetooth symbol at at the bottom right on the APP →Click “permit” →Click the symbol again → Choose “RF320-BLE ” →“Successful connection”

RADDY RF320 Shortwave Radio - fig 2

Description of Symbols on APP Interface

RADDY RF320 Shortwave Radio - fig 3

No.	Symbols	Functions
1	Demodulation	Demodulation mode symbol
2	Bandwidth	Bandwidth
3	SNR	Signal-to-noise ratio
4	RSSI	Signal intensity
5	VOL	Volume symbol
6	Band	Click to select the FM, AM, SW, VHF
7	Preset	7-1: “Preset” display: meaning recall station: Press digital

buttons to select the memory station of number and then press “Enter” to confirm
7-2: “Preset” flashing: means manual station storage: find the target frequency points, long press [MEMO], “Preset” symbol is flashing, then press the la* ] or press digital buttons to select preset channel number. Press [MEMO] key to confirm. 7-3: “Preset–” symbol: There are no stored stations
8| | View the device version
9| | Battery symbol
10| | Radio Frequency display
11| KHZ MHZ| Unit display
12| | Edit the name of the frequency station: Long press this location and enter the current frequency according to the language prompt
13| MEMO| 13-1: press: enter recall station mode: presscalbutton select station
13-2: long press: manual station storage: find the target frequency points ,long press [MEMO] key, “Preset” symbol is flashing, press the ft Cal to select preset channel number. press [MEMO] key to confirm.
14| **| Play &pause
15| MUSIC| Switch between TF card play mode and Bluetooth play mode
Note: If you need to play music in Bluetooth mode, please open the mobile phone Bluetooth connection, select “RF320” in the search list, you can play after successful connection.
No.| Symbols| Functions
---|---|---
16| | 16-1: Digital key dot frequency: press [ENTER] key, press digital
buttons which your target frequency point, press [ENTER] key for confirm.
16-2: Recall station: press digital buttons you need, press [ENTER] key for confirm.
16-3: Select track selection: press digital buttons which your need, press [ENTER] key for confirm.
17| METE| In SW mode, select meter wave
18| SCAN| 18-1: In reception mode, long press to search the channels stored automatically
18-2: In WB band, long press to enter alarm mode, long press again to exit
19| | Set/close the clock
20| SUB BAND| 20-1: In SW mode, press to switch between 11 meter waves. 20-2: In FM mode, press to switch between 4 meter waves.
21| | +/- (adjust the frequency/choose a song/take a channel/choose an address of storing channels)
22| SQ/EQ| 22-1: EQ: for play mode:
E1: NORMAL E2: POP E3: ROCK E4: JAll E5: CLASSIC E6: COUNTRY 22-2: SQ: In the AIR band mode, press SQ to toggle the squelch switch.
23| VOL + –| Volume +/-
24| BAND| Band switching
25| | 25-1: Power on/Power off
25-2: Disconnect APP connection:
after pressing “off” on APP interface, the radio displays time state, long press [MOD] on the button of radio)
The radio displays “bLE OFF”, it means APP is disconnected forcibly
26| SOS| 26-1: Long press to turn on /turn off SOS alarm 26-2: Press to turn on /turn off the light
27| LOCK| Long press to lock, long press again to unlock
28| | Connect the mobile APP to the radio
No.| Symbols| Functions**
---|---|---
29| Time Service| Equipment calibration time
30| | Set your Sleep Time
31| REC| Record in Radio reception mode
Note: insert TF card into the radio before recording Press to enter the recording mode
Press again to exit

Working Modes on APP Interface

Instruction 1: In play music mode, directly click the symbol on interface to choose an EQ sound effect: NORMAL, POP, ROCKJAZZ, CLASSIC, COUNTRY
Instruction 2: In TF play mode, click TF card play order to choose:
(Repeat all, the radio displays: ram)
(Repeat one, the radio displays: row)
(Repeat the songs in current folder, the radio displays: fry)
(Random play, the radio displays: rd)

support@iraddy.com
www.iraddy.com Made in China