Raddy RF75A Shortwave Radio App Instruction Manual

June 11, 2024
RADDY

Raddy logo RF75A Shortwave Radio App
Instruction Manual

Instructions for APP Installation

1: Step 1: turn on the radio RF75A
2: Step 2: download the APP Android System: Use your mobile browser to scan the following QR code iOS System: Go to “App Store” and search “Radio-c” to download the App
http://www.szdipusi.cn/file/Radio-c.apk
2.1: Click “download”—’Click “continue”—’Installation finished, click “open the app”-0.APP icon is displayed
Raddy RF75A Shortwave Radio App - fig 2.2: Click the APP icon to enter and use—.Click the Bluetooth symbol the bottom right on the APP—Click “permit” Click the symbol again –0 Choose ” RF75A-BLE “—”Successful connection” Raddy RF75A Shortwave Radio App - fig
1Raddy RF75A Shortwave Radio App - fig
2

Description of Symbols on APP Interface

No. Symbols Functions
I Demodulation Demodulation mode symbol
2 Bandwidth Bandwidth
SNR Signal-to-noise ratio
4 RSSI Signal intensity
VOL Volume symbol
6 Band Click to select the FM, AM, SW, VHF
7 Present 7-1: “Present” display: meaning, recall station: Press digital

buttons to select the memory station of number and then press” Enter” to confirm
7-2: “Present” flashing: mean manual station storage: find the target frequency points , long press [MEMO] ,”Present” symbol is flashing, then press the [(3E>] to select station storage address number. press [MEMO] key to confirm.
7-3:”Present–” symbol: There are no stored stations
8| | View the device version
9| | Battery symbol
I 0| | Radio Frequency display
II| KHZ MHZ| Unit display
12| | Edit the name of the frequency station: Long press this location
and enter the current frequency according to the language prompt
13| MEIMO| 13-I :press: enter recall station mode: press[ 43 c> ]button select station.
13-2:long press: manual station storage: find the target frequency points, long press [MEMO] key,”Present” symbol is flashing, press the [ <3 c> ] to select station storage address number, press [MEMO] key to confirm.
14| | Play & pause
15| | Switch between TF card play mode and Bluetooth play mode Note: If you need to play music in Bluetooth mode, please open the mobile phone Bluetooth connection, select “RF75A” in the search list, you can play after successful connection.

Raddy RF75A Shortwave Radio App - fig 3

No. Symbols Functions
16 16-I :Digital key dot frequency: press [ENTER] key, press digital

buttons which your target frequency point, press [ENTER] key for confirm.
16-2:Recall station: press digital buttons you need, press [ENTER] key for confirm.
16-3:Frequency: press digital buttons which your need, press [ENTER] key for confirm.
17| METE| In SW mode, select meter wave
18| SCAN| 18-1:In reception mode, long press to search the channels stored automatically
18-2:In WB band, long press to enter alarm mode, long press again to exit
19| | Set/close the clock
20| MODE| In TF play mode, choose the play mode sequence: repeat all & repeat one & repeat file & random
21| | +/- (adjust the frequency/choose a song/take a channel/choose an address of storing channels)
22| EQ| EQ for play mode:
El : NORMAL E2: POP
E3: ROCK E4: JAZZ E5: CLASSIC E6: COUNTR
23| VOL + –| Volume +/-
24| BAND| Band switching
25| | 25-1:Power on/Power off
25-2:Disconnect APP connection: after pressing “off’ on APP interface, the radio displays time state, long press ® on the right of radio)
The radio displays “bLE OFF”, it means APP is disconnected forcibly
26| SOS| 26-1: Long press to tun on /turn off SOS alarm
26-2: Press to turn on /turn off the light
27| LOCK| Long press to lock, long press again to unlock

No. Symbols Functions
28 Connect the mobile APP to the radio
29 Equipment calibration time
30 Set your Sleep Time
31 REC Record in Radio reception mode

Note: insert TF card into the radio before recording press to enter the recording mode press again to exit

Working Modes on APP Interface

Raddy RF75A Shortwave Radio App - fig 5 Instruction 1: in play music mode, directly click the symbol on interface to choose an EQ sound effect :NORMAL POP, ROCK, JAZZ, CLASSIC, COUNTRY.
Instruction 2: in TF play mode, click TF card play order to choose:

| (Repeat all, the radio displays: rA)
---|---
| (Repeat one, the radio displays: r0)
| (Repeat the songs in current folder, the radio displays: rF)
| (Random play, the radio displays: rr)

Raddy logo

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals