unitech EA630 Boot Case User Guide
- June 10, 2024
- unitech
Table of Contents
Unitech EA630 Boot Case
Product Information: EA630 Boot Case
The EA630 Boot Case is a protective case designed to fit the Unitech EA630 mobile computer device. The case is made of durable materials that provide protection against scratches, dust, and minor impacts. The top corner of the case snaps securely onto the device to ensure it stays in place.
Product Usage Instructions
How to put on the boot case with EA630
- Hold the EA630 mobile computer device in your hand.
- Slide the bottom of the device into the bottom of the boot case.
- Ensure that the device is securely in place.
- Press the top corner of the case onto the top corner of the device until it snaps in place.
How to remove the boot case with EA630:
- Hold the device in one hand.
- Using both hands, push down on one edge of the top corner of the case.
- Firmly pry the case apart from the device.
- Attach additional edges to the case to ensure that it stays in place when removed from the device.
- Grab the device and gently pull it out of the case.
Note: Always make sure that the device is securely in place before using it with the boot case. The boot case is not designed to protect against major impacts or drops. If you experience any issues with your unit or have further questions, please visit http://www.ute.com/ for more information. © 2020 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
How to put on the boot case with EA630
- Slip the EA630 into the bottom of the boot case. Snap in the top corner.
- Attach Ad additional Edges, and make sure EA630 is secured with the boot case.
How to remove the boot case with EA630
- Push one edge of the top corner with both hands and firmly pry the case apart from EA630.
- Grab EA630 to pull it out.
Copyright 2020 Unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of Unitech Electronics Co., Ltd.