MotoMotion CH11-R Remote Control Instructions
- June 10, 2024
- MotoMotion
Table of Contents
MotoMotion CH11-R Remote Control
Product Overview
- Product Name: Remote Control
- Product Model No.: CH11 R
- FCC ID: 2BA76CH11MNT001
Environment requirement
- Operation temperature: +10 ℃℃~ +40
- Storage temperature: 10 ℃℃~65
- Operating Humidity: 10 %~80%RH non condensing.
- Storage Humidity: 10%~ 85%RH non condensing.
Directions for Operation
Pairing Remote
Unplug the bed from the power source,then press and hold HEAD DOWN and FLAT
Buttons simultaneously until the blue backlights of the remote control are
off.
ADJUST:
ONE TOUCH BUTTON:
UNDERNEATH LED LIGHTING
Matters needing attention
- The function will only work normally in proper working power conditions.
- Remote Control needs three AAA batteries
- The control box is needed for proper control.
- If problems are identified, they must be treated by professional personnel.
FCC
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
For Inte ntional and unintentional radiators the manual shall caution the user and manufacturer that changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment