Sharktooth Prime EVO Universal Plug and Play Intercom System User Guide

Sharktooth Prime EVO Universal Plug and Play Intercom System User Guide

DESCRIPTION – LEGENDA

Button-/Button+ OPERATION

Press X sec.

Press X times

Sound alert
AUDIO FEEDBACK
VISUAL FEEDBACK

Blue led blinking

Red led blinking

Red/blue led blinking

Purple led

Steady blue led

Steady red led

POWER ON

Press 3 sec.

Led Blinking

“Power on”

Battery status

PAIRING TO PHONE/GPS

Status: power off

Press 4 sec.

Led blinks alternately

Searching Bluetooth device on your phone. If needed, enter PIN code (0000).

Four led blinking’s

“Pairing successful”

“Device connected”

POWER OFF

Press 3 sec.

Led Blinking

“Power off”

PAIRING ANOTHER SHARKTOOTH PRIME

Status: Both units powered on

Press 5 sec. on both devices

“Pairing”

Led blinks alternately on both devices

Three led blinkings on both devices

“Pairing successful”

PAIRING TO A DIFFERENT MODEL/BRAND UNIT

Status: Both units powered on

Press 5 sec.

Led blinks alternately

Follow the “phone” pairing procedure

“Pairing”
Both units stop fl ashing

“Pairing successful”

OPEN/CLOSE INTERCOM

Status: units on and paired

Press once

“Beep”

Led blinks: audio active

RESET ALL PAIRINGS

Status: power off

Press 7 sec.

Steady led for 3 sec.

“Beep”

VOICE CALL

Status: unit on and connected to a phone

Press twice

Voice assistant (Google assistant, Siri)

Press twice to end the call

Note: Double click on + Button -> Redial.

ANSWER A CALL

Status: phone rings

Press once to answer a call

Press once to end a call

Press 3 sec. to reject a call

Note: if the automatic reply is activated, after 8 seconds the call automatically starts.

VOLUME ADJUSTMENT

Status: while listening to an audio source (intercom, music, phone call…)

Keep pressed to increase the volume

Keep pressed to decrease the volume

MUSIC

Status: unit on and connected to the phone

Select a music APP from the phone

Press once Play/Pause

Blinking

Press twice Song forward

Press twice Song backward

CHANGE LANGUAGE

Keep pressed for more than 7 seconds

“Battery status” in the various languages. Release + button to select the desired one.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

SHARK S.A. Z.A.C. de la Valentine 110, route de La Valentine 13396 MARSEILLE Cedex 11 – FRANCE
Tél. : +33 (0)4 91 18 23 23
Fax : +33 (0)4 91 35 29 23
e-mail : contact@shark-helmets.com
Read the instructions carefully before installation and use.

Produced or imported by:
MIDLAND EUROPE srl Via R. Sevardi 7 – 42124 Reggio Emilia – Ital Distributed in Canada by: GAMMA POWERSPORT 100 HUNTER VALLEY RD L3V0Y7 ORILLIA (ON)

To download the complete user manual please visit
www.shark-helmets.com

References

• helmets.com
• SHARK HELMETS

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>