CABERG Pro Speak EVO Intercom User Guide

: June 10, 2024
: CABERG

CABERG Pro Speak EVO Intercom

CABERG-Pro-Speak-EVO-Intercom-product

Product Information

The Caberg Pro Speak Evo is a wireless communication system designed for motorcycle riders. It allows riders to communicate with each other, listen to music, and answer phone calls while riding. The device comes equipped with speakers, a wired microphone, a boom microphone, buttons for volume control and call management, and a micro USB recharge plug. The device operates using 2.4GHz frequency and has a maximum power of 2.5mW.

Buttons and LED indicators

Button -: Decreases volume
Button +: Increases volume
Button X: Used for operation (press X seconds, press X times)
Micro USB recharge plug: Used to recharge the device
Blue LED blinking: Visual feedback for sound alert
Red LED blinking: Visual feedback for power off
Red/blue LED blinking: Visual feedback for searching Bluetooth device on your phone
Purple LED: Visual feedback for pairing successful
Steady blue LED: Visual feedback for power on
Steady red LED: Visual feedback for power off

Product Usage Instructions

Power On/Off and Battery Status
To power on the device, press the power button (Button X) for 3 seconds. The steady blue LED indicates that the device is turned on. To power off the device, press the power button (Button X) for 3 seconds. The steady red LED indicates that the device is turned off. To check the battery status, refer to the LED indicators – blinking indicates low battery, steady indicates sufficient battery.

Pairing to Phone/GPS
To pair the device to your phone or GPS, ensure that the device is powered off. Press the power button (Button X) for 4 seconds to start pairing. The LED will blink alternately to indicate that the device is searching for Bluetooth devices on your phone. If needed, enter the PIN code 0000. Four LED blinkings indicate successful pairing. Once paired, the LED indicators will show a steady blue LED and a purple LED.

Pairing Another Caberg Pro Speak Evo
To pair two Caberg Pro Speak Evo devices, ensure that both devices are powered on. Press the power button (Button X) for 5 seconds on both devices to start pairing. The LED indicators will blink alternately on both devices. Three LED blinkings on both devices indicate successful pairing.

Pairing to a Different Model/Brand Unit
To pair the device to a different model/brand unit, ensure that both units are powered on. Press the power button (Button X) for 5 seconds. The LED will blink alternately. Follow the phone pairing procedure to complete the pairing process.

Open/Close Intercom
To open/close intercom, ensure that both units are powered on and paired. Press the intercom button (Button X) once. A beep sound will be heard, and the LED will blink to indicate audio is active.

Voice Call
To make a voice call, ensure that the device is turned on and connected to a phone. Press the call management button (Button X) twice to activate the voice assistant (Google assistant, Siri). Press the call management button (Button X) twice again to end the call.

Answer a Call
To answer a call, ensure that the device is turned on and connected to a phone. Press the call management button (Button X) once to answer the call. Press the call management button (Button X) once again to end the call. To reject a call, press the call management button (Button X) for 3 seconds.

Volume Adjustment
To adjust the volume, ensure that you are listening to an audio source (intercom, music, phone call). Press and hold the volume control button (Button + or Button -) to increase or decrease the volume.

Music
To listen to music, ensure that the device is turned on and connected to your phone. Select a music app from your phone. Press the music control button (Button X) once to play/pause. Press the music control button (Button X) twice to skip to the next song or go back to the previous song.

Change Language
To change the language, ensure that the device is turned on. Press and hold the language button (Button +) for more than 7 seconds. The LED will show battery status in various languages. Release the language button (Button +) to select the desired language.

DESCRIPTION – LEGENDA

CABERG-Pro-Speak-EVO-Intercom-fig-1

POWER ON

POWER OFF

PAIRING TO PHONE/GPS

CABERG-Pro-Speak-EVO-Intercom-fig-4

PAIRING ANOTHER CABERG PRO SPEAK EVO

PAIRING TO A DIFFERENT MODEL/BRAND UNIT

CABERG-Pro-Speak-EVO-Intercom-fig-7

OPEN/CLOSE INTERCOM

RESET ALL PAIRINGS

VOICE CALL

CABERG-Pro-Speak-EVO-Intercom-fig-10

Note: Double click on + control -> Redial.

ANSWER A CALL

Note: if the automatic reply is activated, after 8 seconds the call automatically starts.

VOLUME ADJUSTMENT

Frequency 2.4GHz
Max power 2.5mW

MUSIC

CHANGE LANGUAGE

FCC STATEMENT

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may causeundesired operation. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

To download the complete user manual please visit www.caberg.it/en

Distributed by: CABERG S.P.A. Via Emilia, 11 – 24052 Azzano S.Paolo Bergamo (Italy) www.caberg.it Read the instructions carefully before installation and use.Produced or imported by: MIDLAND EUROPE srl Via R. Sevardi 7 – 42124 Reggio Emilia – Italy Distributed in Canada by: