CABERG 901203 Just Speak Wireless Communication Installation Guide
- June 6, 2024
- CABERG
Table of Contents
901203 Just Speak Wireless Communication
Installation Guide
ASSEMBLY
-
Remove both cheek pads and place the connecting cable between the left and right speaker under the rear cushion.
-
Place the right speaker (R) behind the cheek pad at the holes using the velcro on the back of the speaker.
-
Repeat the operations for the right speaker (R) to position the left (L).
-
Snap-in the cheek pad’s buttons on both sides paying attention to not ‘’pinch’’ the cables.
-
Attach the microphone on the comfort padding with the Velcro on the back of the microphone base.
-
Adjust the microphone’s position by deforming its boom.
WARNING Check that the triangle on the microphone is facing the mouth. -
Place the USB socket between the removable cheek pads and the comfort padding.
-
Stick the remote control on the side of the shell verifying the correct adhesion.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>