numera Libris 2 Demo Fall Detection User Guide

numera Libris 2 Demo Fall Detection

Demo Fall Detection

• New Demo feature allows a user to test Fall Detection on a Libris 2 device.
• Users can have peace of mind knowing that automatic fall detection is enabled on the device and works.
• Steps to perform the demo are simple, easy to follow and safe.
• Provides a 30-minute window for user to test fall detection.
• Demo feature turns off automatically after 30 minutes – or can be manually disabled – and device returns to normal Fall mode.

Setting up the Demo Fall Detection – Prerequisites

• Realm must be configured to allow for this feature.
• Dealers can contact Numera Technical Support to request this feature (1.855.546.3399).
• Fall Detection must be enabled on the device.
• Device software must be minimum v2.6.1.
• User must be aware tha t Demo mode is being enabled for Fall Detection.

Setting up Demo Fall Detection – Dealer Actions

• To enable Demo Fall Detection (FD
• Log into the Numera Dealer Portal
• Go to the Device page
• Go to the “Settings” section
• Hit the “Edit” icon
• Select “Demo Mode” – On
• Hit “OK”

Testing Demo Fall Detection – Dealer Actions

Dealer will confirm they see an event – Demo Fall Detection (FD) Enabled.

• Click on Locations tab to see the event list
• This action sets the timer for 30 minutes.
• Dealer informs the user that Demo FD is enabled.

Testing Demo Fall Detection – User Actions

• User picks up the device.
• User extends their arm out straight, parallel to the ground.
• User drops the device to the ground (it is okay if it bounces).
• Device must be left on the ground for 2-3 seconds and can then be picked up.
• Within a minute, the device will enunciate that it detected a fall and place a call to the station.
• User can tell the operators they are testing Fall Detection

After Testing is Complete

• User has no further action. They can resume wearing the device.
• System will disable the Demo Fall Detection feature automatically after 30 min – or – dealer can manually disable it.
• Device returns to normal Fall Detection mode.
• Dealer can confirm they see a Demo Fall Detection Disabled event.
• Dealer can reach out to the user telling them the FD demo mode is disabled.

COMPANY CONFIDENTIAL – Silent Call
Thank you

References

• Medical Alert Systems | Numera

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>