NEBO TANGO Spot Light Instructions
- June 10, 2024
- NEBO
Table of Contents
NEBO TANGO Spot Light
Product Information
The Tango is a lighting device that has two modes: Work Light Mode and Spot Light Mode. It has a maximum brightness of 1500 lumens and can be dimmed down to 10%. The Tango also features a memory power setting that allows quick access to the last dimmed mode.
Product Usage Instructions
Lighting Instructions:
- To turn on the Tango, press and hold the power button for 2 seconds.
- After 2 minutes, the Tango will default to Work Light Mode (750 lumens).
Dimming Instructions:
- While the light is ON, in Work Light or Spot Light mode:
- Press and hold the power button for 1.5 seconds to dim. The light will blink 1x when the light reaches 10% or 100%.
- Release the button at any time to set desired brightness. (NOTE: If button is still pressed, light will continue to dim and rise between 100% and 10%.)
- To reset the light level, power light OFF. The Tango will reset back to 100% brightness when you turn either light back on.
Memory Power Setting:
- By double clicking the power button, this feature will allow for quick access to the last dimmed mode.
- To reprogram memory, simply dim each light to your new desired brightness level.
Note:
- Leave either mode (Work or Spot Light) ON for 8 seconds or longer, and the next press of the button turns the light OFF.
LIGHTING INSTRUCTIONS
- Work Light: Press button 1x to activate.
- Spot Light: Press button 2x (from the OFF position) to activate.
- Turbo Mode (Work & Spot Light): From the OFF position, press & hold button for 2 seconds.
After 2 minutes TANGO will default to Work Light Mode (750 lumens).
DIMMING INSTRUCTIONS
While the light is ON, in Work Light or Spot Light mode:
- Press and hold the power button for 1.5 seconds to dim. The light will blink 1x when the light reaches 10% or 100%.
- Release the button at any time to set desired brightness. (NOTE: If button is still pressed, light will continue to dim and rise between 100% and 10%.)
- To reset the light level, power light OFF. TANGO will reset back to 100% brightness when you turn either light back on.
MEMORY POWER SETTING
By double-clicking the power button, this feature will allow for quick access
to the last dimmed mode. To reprogram memory, simply dim each light to your
new desired brightness level.
NOTE: Leave either mode (Work or Spot Light) ON for 8 seconds or longer,
and the next press of the button turns light OFF.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>