Porseme 3D Glass Electric Wax Melts Warmer Instruction Manual
- June 10, 2024
- Porseme
Table of Contents
Porseme 3D Glass Electric Wax Melts Warmer
HOW TO USE
-
Plug it in and wipe down the top glass of your wax warmer.
-
Place Wax Melt or Cube in Wax Warmer
-
Turn the Warmer On
-
Enjoy the Lovely Scent
-
Turn the warmer off
-
Safely remove the used wax melt
WARNING
When using electric products, basic precautions should always be followed, including the following:
- Read all instructions before using the product
- Always check your burner for damage before use
- Never move a wax burner while it is lit or while the wax is hot
- Place the wax melt burner out of reach of children and pets
- Never use a sharp object to remove left over wax, as this could cause damage to the surface of the bowl/dish and risk cracking
- Never leave a wax melt burner unattended
- Do not put fingers or hands into the unit
- Do not immerse in water
- To reduce risk of injury, close supervision is necessary when used near children
- Do not use with extension cords. Always maintain a clearance of 12 inches (30 cm) above warmer
- Failure to follow instructions could result in a fire hazard
SPECIFICATION
| Item | 3D Glass Wax Melt Warmer |
|---|---|
| Material | 3D Glass |
| Power | HOV (need plug in) |
| Bulb information | G9 |
| Switch style | Adjustable switch |
| Size | 5.5″ x2.7″ |
| Wire length | 5ft |
HOW TO CLEAN WAX WARMERS?
- Clean the surface of the warmer with dry cloth. (Wet cloth will damage the 3D effect)
- Use a plastic spoon or knife to pry out the hardened wax. Or place two or three cotton balls into the wax when it’s cooled but still liquid. Wait for the cotton to soak up the wax and then discard the cotton balls. After you’ve removed the wax, clean the dish with soap and a soft cloth or a drop of baby oil. Never use abrasive cleaners.
CAUTION
This Electric Wax Melts Warmer uses electricity. Risk of electrical shock exists if metal or any other foreign object is inserted into any part of this Electric Wax Melts Warmer or it is improperly used. Use only in properly functioning 110-volt electrical outlet.
Place unit on flat surface. Use caution – heated wax can cause burns. Do not leave unit unattended. Keep out of reach of children and pets. Do not touch the G9 bulb directly after using.
WARRANTY POLICY
Porseme provides a 12-month limited time warranty (from date of purchase) on this wax melt warmer relating to manufacturing defects in materials% workmanship. Before returning a product, please contact our friendly customer support with questions.
CUSTOMER SERVICE
