SIIG USB 3.0 to HDMI/DVI Pro Adaptor User Guide
- June 4, 2024
- SIIG
Table of Contents
SIIG USB 3.0 to HDMI/DVI Pro Adaptor User Guide
Features
- USB 3.0, 5 Gbps speed Supports HDMI displays up to 2560×1440@50Hz
- Supports DVI displays up to 2048×1152@60Hz
- For DVI displays, please use the included HDMI to DVI adapter to convert HDMI to DVI
- Backward compatible with USB 2.0
- USB bus-powered, no power adapter required
- Green LED light indicates adapter is active and connected
- Allows up to 6 adapters used per system
- Support display modes: Extend, Mirror and Primary
Package contents
- USB 3.0 to HDMI/DVI Pro adapter
- HDMI to DVI adapter
- User Manual
System requirements
-
PC with an available USB 3.0 Type-A Port
-
Windows6 10 / 8 .1/ 8 / 7 (32/64 bit)
-
Mac OS X% 6 to 10.15, 11.X
(DisplayLink chipset DOES NOT work with Mac OS 10.13.4 to 10.13.6 update.) -
It’s recommended to upgrade to Mojave 10.14 or later version)
Note : If you connect the adapter to a USB 2.0 host port, performance will be limited.
DisplayLink driver installation
- Please use the product serial number “jU-H30H11-S1” to search the driver from the SIIG website.
- Download the driver which fits your PC system
- Run the setup file
- Follow the screen instructions to complete the installation and restart your PC
- For DisplayLink configuration, please search & refer to Support document DisplayLink website https://support.dispIayIink.com/ Windows
How to configure DisplayLink displays on Windows
MAC
How to configure DisplayLink displays on Mac OS X
Thank You
for your purchase!
Support
For more info or tech support
http://www.siig.com/support
Copyright 2021 by SIIG, Inc. All rights reserved
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>