milwaukee 3242B High-Dex Gloves Instruction Manual
- June 10, 2024
- Milwaukee
Table of Contents
milwaukee 3242B High-Dex Gloves
NOTHING BUT HEAVY DUTY
Original instructions
CE Cat. 2, EN ISO21420:2020, EN 388:2016+A1:2018
Mechanical risks Min. – Max.
A: Abrasion resistance 0-4
B: Resistance to cuts 0-5
C: Tear resistance 0-4
D: Resistance to puncturing 0-4
E: Resistance to cuts, TDM test A-F
F: Impact Protection (P=Pass)
EN 388:2016+A1:2018 test results relate to the palm area of the glove (A to
E).
X : This test was not carried out.
0 : The glove falls below the minimum performance level for the given
individual hazard.
The product is in compliance with the requirements of the PPE regulation
2016/425 and regulation 2016/425 (as brought into UK law and amended).
The products was designed for special purpose.
Use
Do not wear gloves when in the vicinity or rotating machine parts (saw blades,
drills etc.) Risk of entanglement!
The product will not protect against chemicals, handling of hot or cold or
cold objects, very sharp objects which impact the hands with great force or
speed. lf tear level ≥ 1 then do not use near to moving machinery-entanglement
hazard. This product is designed to minimize risk / provide protection against
general mechanical risk.
The applications for this gloves will be shown on
www.milwaukeetool.eu
Storage
Keep in its original packaging, under normal temperature and humidity
conditions and in clean, covered and ventilated premises.
Gloves can be used out of the pack 5 years after production date, printed on
the glove. Gloves should be used within 3 years after their purchase. Glove
life time in use is based on wear and abrasion.
Storage temperature: -5°C -35°C
Storage humidity: 20%-75%
Disposal
Dispose of used gloves with respect of the soiling leve according to the
applicable dispoCleaningsal regulations and the regulations of the local
authority. Unused gloves can disposed of the domestic waste.
Cleaning
Do not disinfect!
Donning and doffing
Donning and doffing: Dry the hand before putting on the gloves, adjust the glove
to fi t the fingers, palm and wrist, take off the glove by pulling the cuff area.
Allergies and materials
Some gloves may contain ingredients which are known to be a possible cause
of allergies in sensitive persons who may develop irritant and/or allergic
contact reactions. If an allergic reaction should occur seek medical advice
immediately.
WARNING – THOSE PRODUCTS MAY CONTAIN NITRILE, LATEX, NYLON, POLYESTER, WHICH MAY CAUSE AN ALLERGIC REACTION; FOR MORE INFORMATION PLEASE CONTACT Techtronic Industries GmbH.
EU Regulatory conformity
This safety product is in compliance with the requirements of (EU) Regulation
2016/425 and as far as applicable with the harmonized standards EN ISO
21420:2020; EN 388:2016+A1:2018.
Notified Body responsible for certification and ongoing conformity: INTERTEK Italia S.p.A., Via Guido Miglioli 2/A, 20063 Cernusco sul Naviglio (MI), Italy (Notifi ed Body No.:2575). The Declaration of conformity will be shown on www.milwaukeetool.eu
Regulatory conformity
This safety product is in compliance with the requirements of (EU) Regulation
2016/425 as brought into UK law and amended and as far as applicable with the
harmonized standards EN ISO 21420:2020; EN 388:2016+A1:2018. ITS Testing
Services (UK) Ltd, Centre Court Meridian Business Park, Leicester LE19 1WD,
United Kingdom (Approved Body No.: AB0362). The Declaration of conformity UKCA
will be shown on www.milwaukeetool.eu
References
- Milwaukee Tool Europe | Cordless Power Tools, Outdoor Tools, Hand Tools, PPE, Work wear. Storage and Accessories. | Milwaukee Tools Europe
- Milwaukee Tool Europe | Cordless Power Tools, Outdoor Tools, Hand Tools, PPE, Work wear. Storage and Accessories. | Milwaukee Tools Europe
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>