LIWEI T7 Plus Wireless Headphone User Manual
- June 10, 2024
- LIWEI
Table of Contents
T7 Plus Wireless Headphone User Manual
Headphone overview
Notes on usage and operation:
Power on / off
Toggle the power-on key of Bluetooth to control the power-on / power-off of
the headset. Bluetooth Pairing:
- The earphone will automatically enter the pairing mode after starting up.
- Start the Bluetooth of the mobile phone, search / add Bluetooth devices, and select ” T7″ among Bluetooth devices that founded( some devices need to enter the password ” 0000″).
- Headphones that have been successfully paired will automatically enter the reconnection mode after being turned on, and will automatically connect with the device that was successfully paired last time.
Music Control: Click the multifunctional key to control the pause/play of music Click the key of volume up to increase the volume, and press and hold to switch to the next song. Click the key of volume down to lower the volume and press and hold to switch to the previous song.
Incoming Call Control
When there is a coming call, click the multifunctional key to answer the call,
and click again to hang up the call. You can also tap the right shell of the
earphone twice with your finger to answer the incoming call when someone calls
in, and tap the right shell of the earphone twice again to hang up the call.
When there is a incoming call, you can press and hold the multifunctional key
to reject the call.
ANC Active Noise-canceling:
Toggle the ANC active noise-canceling switch, the green indicator light
will turn on for a long time and it means that the noise reduction feature
will turn on. When the ANC switch is toggled again, the green indicator close
down automatically, and it means that the noise reduction feature is turned
off.
ANC Shift Switch:
Double-click the ANC shift switch to change the ANC gear position. (Shift
between High and Low )
Note: ANC shift feature is only effective both in Bluetooth mode and ANC
turned on. The default degree of ANC is high-level.
Intelligent Playback: Taking off the earphone when playing music,the
music being played will automatically pause , and when you put on the earphone
again, the music will play automatically.
Charge Headset
Turn off the headphones before charging, and use the standard charging cable
to charge. When charging, the red indicator will be on all the time. It takes
2 hours for the headphone to be fully charged, and the blue indicator will be
on after it is fully charged.
Web services
This product supports web-services. Users can turn to the last page of the
manual and scan the QR code with their mobile phones to download APP.
Wake – up web services Mobile Phone Installed with APP )
When both the mobile phone and APP are connected to the headset via Bluetooth,
double-click the multifunctional key of the headset or tap the right shell of
the headset twice to wake-up the feature,and then use the web-services feature
and enjoy intelligent services.
Product Anti-forgery
Scrape off the anti-forgery sticker coating on the packaging box to obtain
the anti-counterfeiting number of the product, then log on to the official
website of www.bluedio.com and type-in the anti-
counterfeiting number to check the authenticity of the product.
Consultation and Assistance
Please log on to www.bluedio.com to inquire
about the relevant information and technical support of the product.
If necessary, please send an email to
aftersales@bluedio.com or call the after-
sales hotline400 – 889 – 0123.
Technical specifications:
Bluetooth Version; Bluetooth 5.0
Working Range: up to 10 meters (free space )
Frequency Range: 2.4GHz-2.48GHz
Support profiles: A2DP, AVRCP, HSP. HFP
Driver Unit: 57mm
Noise-cancellation Sensitivity: -25dB
Impedance: 160
Frequency Response Range: 20Hz-20KHz
Sound pressure level(SPL): 115dB
Standby Time: about 1000 hours
Music / Talk Time: about 30 Hours
Working time( For Only Running the ANC): about 40 hours
Charging time: about 2 hours
Operating temperature range: – 10 °C – 50 DC
Input Voltage / Current: 5V / > 500mA
Output Power: 50mW+50mVV
Download Bluedio APP :
Note: Download the app from Bluedio website, Apple App Store or Android
application market by searching “Bluedio”.
This device complies with pad 15 of the FCC Rules. Operation is subject to the
following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference wil not occur
in a particular installation. If this equipment does cause harmful
interference to radio or tdcvision reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>