DEWALT D28730 2300W Heavy Duty Chop Saw Instruction Manual

: June 4, 2024
: Dewalt

[

](https://manuals.plus/wp-content/uploads/2022/09/DEWALT- logo-2.png)

DEWALT D28730 2300W Heavy Duty Chop Saw

CHOP SAW D28730

Congratulations!
You have chosen a DEWALT tool. Years of experience, thorough product development and innovation make DEWALT one of the most reliable partners for professional power tool users.

Technical Data

Voltage VAC 230/115
Type 1
Power Input W 2300
No‑load speed min‑1 4000
Min. peripheral speed cutting disc m/s 80
Disc diameter mm 355
Disc bore mm 25.4
Disc body thickness mm 3.0
Thread size of spindle M10
Type of cutting disc straight, non‑recessed
Cross‑cutting capacity at 90˚
circular mm 125
square mm 115 x 115
rectangular mm 115 x 130
angular mm 120 x 120
Cross‑cutting capacity at 45˚
circular mm 115
square mm 98 x 98
rectangular mm 95 x 105
angular mm 105 x 105
Weight kg 15.5
Noise values and/or vibration values (triax vector sum) according to
EN62841‑3‑10:
LPA (emission sound pressure level) dB(A) 96.7
LWA (sound power level) dB(A) 107.1
K (uncertainty for the given sound level) dB(A) 3

The vibration and/or noise emission level given in this information sheet has been measured in accordance with a standardized test given in EN62841 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
WARNING: The declared vibration and/or noise emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration and/or noise emission may differ. This may significantly increase the exposure level over the total working period. An estimation of the level of exposure to vibration and/or noise should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration and/or noise such as: maintain the tool and the accessories, keep the hands warm (relevant for vibration), organization of work patterns.

EC‑Declaration of Conformity

Machinery Directive

Chop Saw
D28730
DEWALT declares that these products described under Technical Data are in compliance with: 2006/42/EC, EN62841‑1:2015, EN62841‑3‑10:2015. These products also comply with Directive 2014/30/EU and 2011/65/EU. For more information, please contact DEWALT at the following address or refer to the back of the manual. The undersigned is responsible for compilation of the technical file and makes this declaration on behalf of DEWALT.

Safety Guidelines

The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols.

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage.
Denotes risk of electric shock.
Denotes risk of fire.

GENERAL POWER TOOL SAFETY WARNINGS

WARNING: Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
The term “power tool” in the warnings refers to your mains‑operated (corded) power tool or battery‑operated (cordless) power tool.

Work Area Safety
- Keep work area clean and well lit. Cluttered or dark areas invite accidents.
- Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
- Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
Electrical Safety
- Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
- Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
- Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
- Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
- When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
- If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
Personal Safety
- Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
- Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non‑skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries.
- Prevent unintentional starting. Ensure the switch is in the off‑position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
- Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
- Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
- Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
- If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust‑related hazards.
- Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.
Power Tool Use and Care
- Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
- Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
- Disconnect the plug from the power source and/ or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
- Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
- Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by maintained power tools.
- Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
- Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
- Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.
Service
- Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Safety Instructions for Cut‑off Machines

Cut‑off Machine Safety Warnings
Position yourself and bystanders away from the plane of the rotating wheel. The guard helps to protect the operator from broken wheel fragments and accidental contact with wheel.
The rated speed of the accessory must be at least equal to the maximum speed marked on the power tool. Accessories running faster than their rated speed can break and fly apart.
Wheels must be used only for recommended applications. For example: do not grind with the side of a cut‑off wheel. Abrasive cut‑off wheels are intended for peripheral grinding, side forces applied to these wheels may cause them to shatter.
Always use undamaged wheel flanges that are of correct diameter for your selected wheel. Proper wheel flanges support the wheel thus reducing the possibility of wheel breakage.
The outside diameter and the thickness of your accessory must be within the capacity rating of your power tool. Incorrectly sized accessories cannot be adequately guarded or controlled.
The arbour size of wheels and flanges must properly fit the spindle of the power tool. Wheels and flanges with arbour holes that do not match the mounting hardware of the power tool will run out of balance, vibrate excessively and may cause loss of control.
Do not use damaged wheels. Before each use, inspect the wheels for chips and cracks. If the power tool or wheel is dropped, inspect for damage or install an undamaged wheel. After inspecting and installing the wheel, position yourself and bystanders away from the plane of the rotating wheel and run the power tool at maximum no load speed for one minute. Damaged wheels will normally break apart during this test time.
Wear personal protective equipment. Depending on application, use face shield, safety goggles or safety glasses. As appropriate, wear a dust mask, hearing protectors, gloves and shop apron capable of stopping small abrasive or workpiece fragments. The eye protection must be capable of stopping flying
debris generated by various operations. The dust mask or respirator must be capable of filtrating particles generated by your operation. Prolonged exposure to high intensity noise may cause hearing loss.
Keep bystanders a safe distance away from work area. Anyone entering the work area must wear personal protective equipment. Fragments of workpiece or of a broken wheel may fly away and cause injury beyond immediate area of operation.
Position the cord clear of the spinning accessory. If you lose control, the cord may be cut or snagged and your hand or arm may be pulled into the spinning wheel.
Regularly clean the power tool’s air vents. The motor’s fan can draw the dust inside the housing and excessive accumulation of powdered metal may cause electrical hazards.
Do not operate the power tool near flammable materials. Do not operate the power tool while placed on a combustible surface such as wood. Sparks could ignite these materials.
Do not use accessories that require liquid coolants. Using water or other liquid coolants may result in electrocution or shock.

Kickback is a sudden reaction to a pinched or snagged rotating wheel. Pinching orsnagging causes rapid stalling of the rotating wheel which in turn causes the uncontrolled cutting unit to be forced upwards toward the operator. For example, if an abrasive wheel is snagged or pinched by the workpiece, the edge of thewheel that is entering into the pinch point can dig into the surface of the material causingthe wheel to climb out or kick out. Abrasive wheels may also break under these conditions. Kickback is the result of power tool misuse and/or incorrect operating procedures orconditions and can be avoided by taking proper precautions as given below.

Maintain a firm grip on the power tool and position your body and arm to allow you to resist kickback forces. The operator can control upward kickback forces, if proper precautions are taken.
Do not position your body in line with the rotating wheel. If kickback occurs, it will propel the cutting unit upwards toward the operator.
Do not attach a saw chain, woodcarving blade, segmented diamond wheel with a peripheral gap greater than 10 mm or toothed saw blade. Such blades create frequent kickback and loss of control.
Do not “jam” the wheel or apply excessive pressure. Do not attempt to make an excessive depth of cut. Overstressing the wheel increases the loading and susceptibility to twisting or binding of the wheel in the cut and the possibility of kickback or wheel breakage.
When the wheel is binding or when interrupting a cut for any reason, switch off the power tool and hold the cutting unit motionless until the wheel
comes to a complete stop. Never attempt to remove the wheel from the cut while the wheel is in motion otherwise kickback may occur. Investigate and take corrective action to eliminate the cause of wheel binding.
Do not restart the cutting operation in the workpiece. Let the wheel reach full speed and carefully re‑enter the cut. The wheel may bind, walk up or kickback if the power tool is restarted in the workpiece.
Support any oversized workpiece to minimize the risk of wheel pinching and kickback. Large workpieces tend to sag under their own weight. Supports must be placed under the workpiece near the line of cut and near the edge of the workpiece on both sides of the wheel.

Additional Safety Warnings for Chop Saws

In operation, avoid bouncing the cutting disc or giving it rough treatment. If this occurs, stop the tool and inspect the cutting disc.
Do not operate the tool while standing in line with the cutting disc. Keep other persons away from the work area.
Be aware of cutting chips and the material being cut. They may be sharp and hot. Allow cut off parts to cool before handling.
The spark deflector becomes hot during use. Avoid touching or adjusting the spark deflect or immediately after operation.
Switch off the tool and wait for the cutting disc to stop before moving the workpiece or changing the settings.
After switching off, never attempt to stop the cutting disc by pressing against the side of the disc.
Do not use cutting fluids. These fluids could ignite or cause electrical shock.
Check that the workpiece is properly supported.
Use the cutting discs recommended by the manufacturer only. Do not use tools for purposes not intended; for example do not use circular saw blade to cut tree limbs or logs.
The max. allowable speed of the cutting disc must always be equal to or greater than the no‑load speed of the tool specified on the nameplate.
Do not use cutting discs that do not conform to the dimensions stated in the Technical Data.
Read the operating instructions supplied by the wheel manufacturer.
Ensure that the abrasive wheel is correctly fitted and tightened before use.
Let the tool run at no‑load in a safe position for at least 30 seconds. If there is a considerable vibration or if any other defect occurs, stop the tool and check it to determine the cause.
Do not use cutting discs for side grinding.
Do not cut concrete, brick, tile or ceramic materials.
Do not cut wood, plastic or synthetic materials.
Do not cut cast‑iron materials.
Never cut magnesium materials.
Do not cut electrically live material.
Use this tool in a well‑ventilated area. Do not operate the tool near flammable liquids, gases or dust. Sparks or hot chips from cutting or arcing motor brushes may ignite combustible materials.
Regularly clear the ventilation slots when working in dusty conditions. If it should become necessary to clean the slots, always use a soft brush; remember to unplug the machine first.
Always store cutting discs well‑protected and in a dry place, out of reach of children.
Check damaged parts. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function—check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired replaced.

Residual Risks

The following risks are inherent to the use of these machines:
- injuries caused by touching the rotating parts.
- injuries caused by disruption of the cutting disc.
These risks are most evident:
- within the range of operation
- within the range of the rotating machine parts
In spite of the application of the relevant safety regulations and the implementation of safety devices, certain residual risks cannot be avoided. These are:
- Impairment of hearing.
- Risk of accidents caused by the uncovered parts of the rotating cutting disc.
- Risk of injury when changing the disc.
- Risk of squeezing fingers when opening the guards.
Additional Safety Warnings for Chop Saws
In operation, avoid bouncing the cutting disc or giving it rough treatment. If this occurs, stop the tool and inspect the cutting disc.
Do not operate the tool while standing in line with the cutting disc. Keep other persons away from the work area.
Be aware of cutting chips and the material being cut. They may be sharp and hot. Allow cut off parts to cool before handling.
The spark deflector becomes hot during use. Avoid touching or adjusting the spark deflect or immediately after operation.
Switch off the tool and wait for the cutting disc to stop before moving the workpiece or changing the settings.
After switching off, never attempt to stop the cutting disc by pressing against the side of the disc.
Do not use cutting fluids. These fluids could ignite or cause electrical shock.
Check that the workpiece is properly supported.
Use the cutting discs recommended by the manufacturer only.
Do not use tools for purposes not intended; for example do not use circular saw blade to cut tree limbs or logs.
The max. allowable speed of the cutting disc must always be equal to or greater than the no‑load speed of the tool specified on the nameplate.
Do not use cutting discs that do not conform to the dimensions stated in the Technical Data.
Read the operating instructions supplied by the wheel manufacturer.
Ensure that the abrasive wheel is correctly fitted and tightened before use.
Let the tool run at no‑load in a safe position for at least 30 seconds. If there is a considerable vibration or if any other defect occurs, stop the tool and check it to determine the cause.
Do not use cutting discs for side grinding.
Do not cut concrete, brick, tile or ceramic materials.
Do not cut wood, plastic or synthetic materials.
Do not cut cast‑iron materials.
Never cut magnesium materials.

Electrical Safety
The electric motor has been designed for one voltage only.
Always check that the power supply corresponds to the voltage on the rating plate.
Your DEWALT tool is double insulated in accordance with EN62841; therefore no earth wire is required. If the supply cord is damaged, it must be replaced only by DEWALT or an authorised service organisation. Mains Plug Replacement (U.K. & Ireland Only) If a new mains plug needs to be fitted:

Safely dispose of the old plug.
Connect the brown lead to the live terminal in the plug.
Connect the blue lead to the neutral terminal. WARNING: No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs. Recommended fuse: 13 A.

Using an Extension Cable

If an extension cable is required, use an approved 3–core extension cable suitable for the power input of this tool (see Technical Data).The minimum conductor size is 1.5 mm2; the maximum length is 30 m. When using a cable reel, always unwind the cable completely.

Package Contents

The package contains:

Chopsaw
Abrasive wheel
Hex key
Instruction manual
Check for damage to the tool, parts or accessories which may have occurred during transport.
Take the time to thoroughly read and understand this manual prior to operation.

Markings on Tool
The following pictograms are shown on the tool:

Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Bore Diameter
Direction of rotation

Date Code Position (Fig. A)
The date code 18 , which also includes the year of manufacture, is printed into the housing.
Example: 2020 XX XX
Year of Manufacture

Description (Fig. A)

WARNING: Never modify the power tool or any part of it. Damage or personal injury could result.

Lock pin
Spark deflector screw
Spark deflector
Base
Fence
Vise
8 mm hex key
Crank
Vise lever
Wheel
Guard
Spindle lock
Lock‑off trigger switch
Lock‑off lever
Fence bolts
Mounting holes
Operating handle
Date code
Carrying handle

Intended Use

Your D28730 chop saw has been designed for the cutting of variously shaped steel materials. It is designed only for use with reinforced bonded abrasives. Diamond or TCT blades should not be used with this unit.
Do not use under wet conditions or in the presence of flammable liquids or gases.
The D28730 chop saw is a professional power tool.
Do not let children come into contact with the tool. Supervision is required when inexperienced operators use this tool.

Young children and the infirm. This appliance is not intended for use by young children or infirm persons without supervision.
This product is not intended for use by persons (including children) suffering from diminished physical, sensory or mental abilities; lack of experience, knowledge or skills unless they are supervised by a person responsible for their safety. Children should never be left alone with this product.

ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of serious personal injury, turn tool off and disconnect tool from power source before making any adjustments or removing/ installing attachments or accessories. An accidental start‑up can cause injury.
WARNING: Use only DEWALT battery packs and chargers.

Cutting Capacity

The wide vise opening and high pivot point provide cutting capacity for many large pieces. Use the cutting capacity chart to determine total maximum size of cuts that can be made with a new wheel.
CAUTION: Certain large, circular or irregularly shaped objects may require additional holding means if they cannot be held securely in vise. CAUTION: DO NOT CUT MAGNESIUM, WOOD, BRICK OR CONCRETE WITH THIS TOOL.

OPERATION

Instructions for Use

WARNING: Always observe the safety instructions and applicable regulations.
WARNING: To reduce the risk of serious personal injury, turn tool off and disconnect tool from power source before making any adjustments or removing/ installing attachments or accessories. An accidental start‑up can cause injury.

To Carry (Fig. A)
Fold down unit to position where you can carry the saw. Push in the lock pin 1 to lock the arm down. Always carry the saw using the carrying handle 19 .
Proper hand position requires one hand on the operating handle 17 .

Proper Hand Position (Fig. A)
WARNING: To reduce the risk of serious personal injury,
ALWAYS use proper hand position as shown.
WARNING: To reduce the risk of serious personal injury

Mounting (Fig. A)
CAUTION: Tool must be supported on stable, level, non‑skid surface to prevent unexpected movement when operating.

Drill holes through the work surface that align the base of the chop saw.
Insert two M10 bolts down through the mounting holes 16 in the base and through holes in mounting surface. The approximate length of the screws should be the thickness of the mounting surface plus 102 mm.

Spark Deflector Adjustment (Fig. A)
WARNING: Do not touch the spark deflector during or immediately after operation as it becomes hot and may cause skin burn.
To best deflect sparks away from surrounding persons and materials, loosen the spark deflector screw 2 , adjust the spark deflector 3 and then retighten screw. Do not allow cordset to come into contact with deflector or sparks as damage to cordset may occur.

Lock‑Off Trigger Switch (Fig. A)
To turn the saw on, push the lock‑off lever 14 to the left, then depress the lock‑off trigger switch 13 . The saw will run while the switch is depressed. Allow the blade to spin up to full operating speed before making the cut. To turn the saw off, release the switch. Keep hands and material away from the wheel until it has coasted to a stop. Allow the blade to stop before raising the saw head. There is no provision for locking the switch on

Material Clamping and Supporting (Fig. B, C)

Angles are best clamped and cut with both legs resting against base.
A spacer block 29 slightly narrower than the workpiece 30 can be used to increase wheel utilization (Fig. B).
Long workpieces must be supported by a block 31 so it will be level with top of base (Fig. C). The cut‑off end 32 should be free to fall downward to avoid wheel binding.

Vise Operation (Fig. A, D)
The vise has a quick travel feature. To release the vise 6 when it is clamped tightly, turn the crank 8 counterclockwise one or two times to remove clamping pressure. Lift the vise lever 9 up. Pull crank assembly out as far as desired. The vise may be shoved into work without cranking. Lower vise lever then tighten vise on work by using crank.

Fence Operation (Fig. A, D, E)
WARNING: Turn off and unplug the tool before making any adjustments or removing or installing attachments or accessories. Be sure the trigger switch is in the OFF position. The fence 5 can be adjusted two ways: to change desired cutting angle and to change spacing between the fence and vise.

To Change the Desired Cutting Angle
Use the 8 mm hex key 7 provided to loosen (do not remove) the two fence bolts 15 . Align the desired angle indicator line with the slot line 28 in the base 4 . Securely tighten both fence bolts before use. For more accurate square cuts, disconnect the power supply, loosen the two fence bolts, push arm down until wheel extends into base. Place a square against the wheel and adjust fence against the square. Securely tighten both fence bolts before use. When making a miter cut, the vise 6 may not clamp securely, depending on the thickness of the workpiece and the miter angle. Other aids (such as spring, bar or C‑clamps) will be necessary to secure the workpiece to the fence when making these cuts

Removal and Installation of Wheels (Fig. F, G)
WARNING: To reduce the risk of serious personal injury, turn tool off and disconnect tool from power source before making any adjustments or removing/ installing attachments or accessories. Do not make any adjustment while the wheel is in motion. Do not make any adjustment while chop saw is plugged into power supply.
WARNING: Always use gloves when handling wheels.
WARNING: Do not impact the wheel, and do not use a wheel that has been dropped or impacted. Do not use a chipped, deformed or damaged wheel.

Push in spindle lock 12 and rotate wheel 10 by hand until wheel lock lever engages slot in inside flange 20 to lock wheel. Loosen the bolt 21 counterclockwise in the center of the abrasive wheel with the 8 mm hex key 7 . Bolt has right‑hand thread.
Remove the bolt 21 , washer 22 , outside flange 23 and old wheel 10 .
Make sure flange surfaces are clean and flat. Install the new abrasive wheel by reversing the above steps.
For safe operation, securely tighten bolt 21 to firmly secure the abrasive wheel 10 in between inner 20 and outer flanges 23 . Do not overtighten bolt 21 . WARNING: Check the work surface that the chop saw rests on when replacing with a new abrasive wheel. It is possible that the wheel may contact ANY ITEMS OR
STRUCTURE THAT EXTENDS ABOVE work surface (under the base) when the arm is fully lowered.

Operation Tips for More Accurate Cuts

Allow the wheel to do the cutting. Excessive force will cause the wheel to glaze reducing cutting efficiency and/or to deflect causing inaccurate cuts.
Properly adjust fence angle.
Make sure material is laying flat across base.
Properly clamp material to avoid movement and vibration.

Motor Brush Inspection and Replacement (Fig. H, I)

BE SURE TOOL IS UNPLUGGED BEFORE INSPECTING BRUSHES.
Brushes should be regularly inspected for wear. To inspect brushes, unscrew the two end cap screws 24 and remove the end cap 25 . To remove each brush 26 , first unplug the shunt wire 27 terminal connection. Then carefully back the brush spring out of the brush box and remove brush. Brushes should
slide freely in brush box. If brushes are worn down to 8 mm as shown in Figure I, they should be replaced. To reinstall each brush, carefully back the spring out of the brush box, insert the brush and return the spring making sure it is pressing on the brush and not touching the brush box. Reconnect shunt wire terminal, then replace the end cap and two screws.

MAINTENANCE

Your power tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.
WARNING: To reduce the risk of serious personal injury, turn tool off and disconnect tool from power source before making any adjustments or removing/ installing attachments or accessories. An accidental start‑up can cause injury.

Cleaning

WARNING: Blow dirt and dust out of the main housing with dry air as often as dirt is seen collecting in and around the air vents. Wear approved eye protection and approved dust mask when performing this procedure. WARNING: Never use solvents or other harsh chemicals for cleaning the non‑metallic parts of the tool. These chemicals may weaken the materials used in these parts. Use a cloth dampened only with water and mild soap. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.

Optional Accessories
WARNING: Since accessories, other than those offered by DEWALT, have not been tested with this product, use of such accessories with this tool could be hazardous. To reduce the risk of injury, only DEWALT recommended accessories should be used with this product. Consult your dealer for further information on the appropriate accessories

Protecting the Environment
Separate collection. Products marked with this symbol must not be disposed of with normal household waste. Products contain materials that can be recovered or recycled reducing the demand for raw materials. Please recycle electrical products according to local provisions. Further information is available at www.2helpU.com.