JBL Tune Buds User Guide
- October 30, 2023
- JBL
Table of Contents
JBL Tune Buds
quick start guide
WHAT’S IN THE BOX
APP
GET EVEN MORE CONTROL AND PERSONALIZATION OF YOUR LISTENING EXPERIENCE WITH
THIS FREE APP.
How to wear
- Try different sizes for a perfect fit and audio performance.
First time use
Power on & CONNECT
DUAL CONNECT + SYNC
MULTI-POINT CONNECTION
(Maximum 2 devices)
CONTROLS
- Enable advance controls by connecting your JBL Tune BUDS to JBL Headphones App .
- ENABLE YOUR VOICE ASSISTANT THROUGH JBL HEADPHONES APP AND ASSIGN IT TO Y OUR PREFERRED EARBUD (L/R)
VOICE AWARE
Power off
FACTORY RESET
DO MORE WITH THE APP
Charging
led behaviors
TECH SPEC
- Model: TUNE BUDS
- Driver size: 10 mm/ 0.39” Dynamic Driver
- Power supply: 5 V 1 A
- Earbud: 5.4 g per pc (10.8 g combined)/
- 0.012 lbs per pc (0.024 lbs combined)
- Charging case: 42 g/ 0.093 lbs
- Earbud battery type: Lithium-ion Battery (70 mAh/ 3.85 V)
- Charging case battery type: Lithium-ion Battery (750 mAh/ 3.7 V)
- Charging time: 2 hrs from empty
- Music playtime with BT on and ANC off: Up to 12 hrs
- Music playtime with BT on and ANC on: Up to 10 hrs
- Talk time with ANC on: Up to 6 hrs
- Talk time with ANC off: Up to 6.6 hrs
- Frequency response: 20 Hz – 20 kHz
- Impedance: 32 ohm
- Sensitivity: 101 dB SPL@1 kHz
- Maximum SPL: 93 dB
- Microphone sensitivity: -38 dBV/Pa@1 kHz
- Bluetooth version: 5.3
- Bluetooth profile version: A2DP V1.3.2, AVRCP V1.6.2, HFP V1.8
- Bluetooth transmitter
- frequency range: 2.4 GHz – 2.4835 GHz
- Bluetooth transmitter
- power: <11 dBm (EIRP)
- Bluetooth transmitter
- modulation: GFSK, π/4-DQPSK, 8-DPSK
- Maximum operation temperature: 45 °C
WARNING
DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY DO NOT SHORT
CIRCUIT | MAY EXPLODE IF DISPOSED OF IN FIRE RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE.
DISPOSE OR RECYCLE
USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue.
Device types: (IC: 6132A-JBLTUNEBUDS) has also been tested against this SAR
limit According to this standard, the highest SAR value reported during
product certification for head use is 1.067 W / kg. The device was tested for
typical bodily operations where the product was kept 0 mm from the head. To
maintain compliance with IC RF exposure requirements, use accessories that
maintain a separation distance of 0mm between the user’s head and the back of
the headset. The use of belt clips, holsters and similar accessories shall not
contain metal parts in its assembly. Use of accessories that do not meet these
requirements may not comply with IC RF exposure requirements and should be
avoided.
Head operation
The device was subjected to a typical head manipulation test. In order to
comply with RF exposure requirements, a minimum separation distance of 0 cm
must be maintained between the user’s ear and the product (including the
antenna). Head exposure that do not meet these requirements may not meet RF
exposure requirements and should be avoided. Use only the supplied or approved
antenna. .
IC: 6132A-JBLTUNEBUDS
- FCC ID: APIJBLTUNEBUDS
- IC: 6132A-JBLTUNEBUDS
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
Google, Android and Google Play are trademarks of Google LLC.
www.anatel.gov.br
Product specifications and app screens are subject to change without notice.
HP_JBL_TUNE BUDS_QSG_Global_SOP_V12
Documents / Resources
| JBL
Tune
Buds
[pdf] User Guide
925927, 925928, 925926, Tune Buds, Buds
---|---