JBL B0BQPNMXQV Vibe Beam True Wireless Headphones User Guide
- June 10, 2024
- JBL
Table of Contents
WHAT’S IN THE BOX
SCAN ME
https://register.jbl.com
APP
https://storage.lscloud.harman.com/Testing/MyJBLHeadphones/QRCodeDownload/appstore/jblheadphone.html
HOW TO WEAR
FIRST TIME USE
power on & CONNECT
DUAL CONNECT
CONTROLS
VOICEAWARE
power off
Manual SETUP
DO MORE WITH THE APP
Charging
led behaviors
TECH SPEC
Model: VIBE BEAM
Driver size: 8 mm/ 0.315” Dynamic Driver
Power supply: 5 V 1 A
Earbud: 4.4 g per pc (8.8 g combined)/ 0.0097 lbs per pc (0.0194 lbs combined)
Charging case: 39.5 g/ 0.0871 lbs
Earbud battery type: Lithium-ion polymer (48 mAh/ 3.85 V)
Charging case battery type: Lithium-ion polymer (530 mAh/ 3.7 V)
Charging time: <2 hrs from empty Music playtime with
BT on: 8 hrs
Talk time: 4.5 hrs
Frequency response: 20 Hz – 20 kHz
Impedance: 16 ohm
Sensitivity: 100 dB SPL@1 kHz
Maximum SPL: 95 dB
Microphone sensitivity: -38 dBV/Pa@1 kHz
Bluetooth version: 5.2 Bluetooth profile
version: A2DP V1.3, AVRCP V1.6, HFP V1.7
Bluetooth transmitter frequency range: 2.4 GHz – 2.4835 GHz
Bluetooth transmitter power: <15 dBm
Bluetooth transmitter modulation: GFSK, π/4-DQPSK, 8DPSK
Maximum operation temperature: 45 °C
IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue.
Device types: (IC: 6132A-JBLVBEAM) has also been tested against this SAR limit
According to this standard, the highest SAR value reported during product
certification for head use is 1.16W/kg.
The device was tested for typical bodily operations where the product was kept
0 mm from the head. To maintain compliance with IC RF exposure requirements,
use accessories that maintain a separation distance of 0mm between
the user’s head and the back of the headset. The use of belt clips, holsters
and similar accessories shall not contain metal parts in its assembly. Use of
accessories that do not meet these requirements may not comply with IC RF
exposure requirements and should be avoided.
Head operation
The device was subjected to a typical head manipulation test. In order to
comply with RF exposure requirements, a minimum separation distance of 0cm
must be maintained between the user’s ear and the product (including the
antenna). Head exposure that do not meet these requirements may not meet RF
exposure requirements and should be avoided. Use only the supplied or approved
antenna.
IC: 6132A-JBLVBEAMFCC ID: APIJBLVBEAM
HVIN: VBEAML, VBEAMR
This equipment complies with Directive 2014/53/EU radiation exposure limits
set forth for an uncontrolled environment. End user must follow the specific
operating instructions for satisfying RF exposure compliance.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
The portable device is designed to meet the requirements for exposure to radio
waves established by European Union market(France). These requirements set a
SAR limit of 2W/ kg averaged over ten gram of tissue. The highest SAR value
0.221W/kg reported under this standard during product certification for use
when properly worn on the head.
WARNING
DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY | DO NOT SHORT
CIRCUIT | MAY EXPLODE IF DISPOSED OF IN FIRE | RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE | DISPOSE OR RECYCLE USED BATTERIES ACCORDING TO
THE INSTRUCTIONS
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by HARMAN International
Industries, Incorporated is under license. Other trademarks and trade names
are those of their respective owners.
HP_JBL_VIBE BEAM_QSG_US+EMEA_SOP_V10C