Atlanta ATH-2371 Electric Kettle Instruction Manual

Atlanta ATH-2371 Electric Kettle Instruction Manual

DEAR CUSTOMER!
CONGRATULATIONS ON YOUR GOOD CHOICE! NOW YOU ARE THE OWNER OFATLANTATM PRODUCT NOTABLE FOR ITS PROGRESSIVE DESIGN AND GOOD QUALITY PERFORMANCE. WE HOPE OUR PRODUCTS WILL STAY WITH YOU FOR YEARS ON END.

BEFORE OPERATING

Please read these operating instructions before kettle operating. Before the first use or in case of long time interruption in operation it is recommended to pour water to the maximum level mark and bring it to the boiling. Pour off the boiled water, repeat the procedure twice.

Do not pour cold water only, which will complete boiling, and still very hot kettle. A large temperature difference can bad affect the materials used in the kettle. Please wait until the kettle has cooled down a bit.

SAFETY MEASURES

• The kettle operates from power supply; power supply technical characteristics are specified on the factory marking of device.
• The kettle housing is made of heat-resistant plastic and can not be suddenly destroyed itself during its normal operation. But be careful, case kettle can be easily broken in the application of mechanical impact. Especially be careful when children are nearby.
• As surface temperature of the kettle can be over 60 °С, do not touch it except fora handle and buttons.
• Distance between the kettle and other appliances above it must be over 50 cm in order not to be damaged by steam. Avoid close position to other appliances that are easily distorted due to high temperature.
• he device is not intended for use by persons (including children) with reduced physical, sensory or mental ability or if they have no experience or knowledge, if they are not under control or not instructed on the use of the instrument the person responsible for their safety.
• Do not leave the appliance unattended when the kettle is plugged in or when children are around. A power supply cord must not be hung down as children can pull it, throw the kettle and get burnt.
• To avoid the danger, if the power cord has been damaged, it should be replaced by the manufacturer, its agent or similar qualified person.
• The kettle must be used only upright. Never use it on uneven and non heatresistant surface.
• Use a separate socket for the kettle.
• In case of connecting the device never use the electrical extension cord.
• In order to avoid a fire or electric shock:
  • do not scrape the body of the kettle;
  • do not expose the electric part of the kettle to rain or water exposure;
  • do not submerge the kettle into water or other liquid;
  • KEEP THE APPLIANCE PLUGGED OUT IF IT IS NOT USED, THE DEVICE IS DANGEROUS EVEN IF IT IS UNPLUGGED;
  • do not cover the kettle;
  • do not use the kettle in wet places;
  • do not plug in the kettle if there is water on its base’s surface;
  • do not plug in and plug out by wet hands;
  • do not allow overheating of a plug; it must be fully and tightly put into a socket;
  • do not use the kettle if a power supply cord is damaged or soaked;
  • plug out the kettle before cleaning and wait until it has cooled down completely after use;
  • never pull a power supply cord to switch off the appliance, just pullcarefully a plug from an outlet;
  • keep the appliance in a dry and cool place.
  • The device is designed for indoor use, exclusively for domestic use. Do not use the appliance for professional purposes.
  • In case of any work failure, please, apply to the nearest maintenance center with va warrantee certificate. Never fix problems by yourself.
  • Don’t arrange kettle near sources, such as: heating radiators, gas stoves, or at places exposed to direct sun rays, excessive dust, mechanical vibration or impact loads.
  • In case of transportation under the reduced temperature conditions do not plug in the kettle less than two hours of its storage in warm place. Don’t use any reactive liquids (gasoline, kerosene, alcohol, different solvents) for kettle cleaning.
  • Any errors in storage, transportation and use of the device are not covered by the warranty.

KETTLE BASIC ELEMENTS

A – lid of kettle
B – lock of lid
C – switch
D – handle
E – base unit
F – kettle housing
G – filter
H – heating plate
I – operation indicator
J – power cord

PERFORMANCE SPECIFICATIONS

• Voltage: 230 V~ 50 Hz
• Rated power: 2000 W
• Capacity: 1.7 l
• Weight: 0.682 kg
• Dimensions: 21.22×15.9×21.67 cm
• Operating life: 3 years

With delicate handling service life can significantly exceed the period set by the
manufacturer.

The date of manufacture is provided in the serial number of the products: the third and the fourth digits – month of manufacture, the fifth and the sixth digits – year of manufacture. Example: хх1219хххххх – month 12, year 2019.

OPERATION

1.  Arrange kettle with the base unit at flat dry heat-resistant surface as close to the socket as possible.
2. Make sure the kettle is switched off and plug it in.
3. Fill the kettle with water through the top open. Water volume shall be not less than 0.5 l , but not more than the volume marked at the scale as «MAX».
4. Tightly close the top of the kettle otherwise the kettle won’t switch off when boiling.
5. Put the kettle on the base plugged in. The design of the kettle makes it possible to put it on the base from any side.
6. Push ON pushbutton (С). It starts to work immediately and the blue illumination will be light up.
7. Wait till water is boiling. The kettle will switch off automatically. Boiling process may be stopped manually at any time. In order to make repeated boiling, it is necessary to wait a while, till the kettle get cold a little and heat-sensing devicearrives to home position.
8. Don’t open the top in the process of boiling and immediately after in order to avoid thermal injury.

NOS

1. Never fill the kettle with any liquid except water.
2. Be money-saving: don’t boil more water than you need. This will reduce power consumption and increase the operating life of the kettle.
3. Condensate may appear in the kettle in the course of operation.
4. Never heat the kettle on gas or electric stove.
5. The kettle shall be used only with the base completed with the supply.
6. The manufacturer reserves the right to make change in the kettle.

EANING AND CARE

• The kettle must be cleaned regularly in order to remove calciferous sediments. A bulk of sediments on a heating element can cause a breakage of the kettle.

• Plug out the kettle and let it cool down, then clean it with a wet cloth using soda. Do not use reactive and abrasive detergents as they can damage a surface of the kettle.
• Do not use tools when cleaning the kettle.
• To prevent calciferous sediments getting to your cup the kettle is equipped  with a filter that must be regularly washed with water. The sediment appeared due to lime water boiling inside of the kettle is not harmful.
• The kettle must be thoroughly washed after cleaning.
• Never put the device into water or another liquid.

ENVIRONMENTAL PROTECTION

 The old devices are the package of the technical materials; therefore they can not be recovered with the domestic waste! On that reason, please, support us in the resources saving and environmental protection and return the unit to the recycling center (if applicable).

References

• Атланта - Страховой центр, г. Казань

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>