Razor Hovertrax Prizma and Hovertrax LUX Smart Balancing Electric Scooter Owner’s Manual
- June 10, 2024
- Razor
Table of Contents
HOVERTRAX PRIZMA™ & HOVERTRAX LUX™
SMART BALANCING ELECTRIC SCOOTE
Hovertrax Prizma and Hovertrax LUX Smart Balancing Electric Scooter
OWNER’S MANUAL
Read and understand this entire manual before allowing
child to use this product! For assistance contact Razor.
DO NOT RETURN TO STORE.
NOTE: Manual illustrations are for demonstration purposes only.
Illustrations may not reflect exact appearance of actual product.
Specifications subject to change without notice.
Please have your product along with the 19 character product I.D. code with
you before contacting Razor for warranty assistance and/or replacement parts.
Product I.D. Code: _____ – ____ – ____
INTRODUCTION
This manual will help you understand, set up and safely use the Razor ®
Hovertrax Prizma ™ /Hovertrax Lux ™ . It is important that you adhere to all
safety warnings and cautions that appear throughout and that you use good
judgment when riding, so keep reading!
A SPECIAL TECHNOLOGY, WITH NEW
CONCEPTS FOR CONTROL AND SAFETY
As is obvious the first time you see it, the Razor Hovertrax Prizma/Hovertrax
Lux is different from things you may have ridden before. No handlebars. No
front or rear wheel. No brake. The Razor Hovertrax Prizma/Hovertrax Lux is
such a product, and it moves, which means if you are interested in riding it
you should be interested in learning how to do that properly – and if you are
interested in minimizing the risk of falling off or being injured, you should
be very interested in focusing on how to ride
this product as safely as possible. Helping you do that is the goal of this
Manual and other warnings. THIS HOVERTRAX PRIZMA/HOVERTRAX LUX, LIKE RAZOR’S
OTHER EXISTING HOVERTRAX PRODUCTS MOVES AND YOU MUST UNDERSTAND AND FOLLOW THE
INSTRUCTIONS IN ORDER TO MAXIMIZE YOUR FUN AND MINIMIZE RISKS OF INJURY
PRESENTED BY RIDING THIS MOVING PRODUCT. 
MOVEMENT OF THE RAZOR HOVERTRAX PRIZMA/HOVERTRAX LUX IS CONTROLLED BY THE
ANGLE OF THE FOOT PLATFORMS, WHICH IS DETERMINED BY PRESSURE APPLIED BY THE
RIDER’S FEET ON THE PLATFORMS.
Different? Well, yes, the Hovertrax Prizma/Hovertrax Lux is “different.” It is
an electrically motorized, computerized, gyroscopically-balance-assisted,
independently articulated, dual-platform two-wheeled personal mobility system.
If that sounds unlike any bicycle, scooter, RipStik, roller skate or water ski
you have ever used, you’re on the right track.
However, the Razor Hovertrax Prizma/Hovertrax Lux does not operate
“magically”, and it does not fly, float or disappear. Its movements are not
controlled remotely, or by the rider’s brainwaves or earnest good wishes, and
it has neither a steering wheel, nor a brake, nor external stabilizers of any
kind. Yet it can go, stop, turn and back up – and all of this is controlled
solely by the rider’s feet moving at angles relative to the ground. THIS IS
CRUCIAL TO RECOGNIZE AND TO REMEMBER
AT ALL TIMES. The angle of your feet – forward, level or rearward – on each
foot platform is how Hovertrax Prizma/Hovertrax Lux receives, processes and
executes instructions from the rider. This will affect the operation of the
Razor Hovertrax Prizma/Hovertrax Lux far more than leaning or “shifting body
weight” alone.
WARNING: Read this manual – including both “Safety Warnings” (pages 2-3)
and “How to Operate” (pages 7-10) and learn to ride safely!
SAFETY WARNINGS
WARNING: Whenever you ride the Hovertrax Prizma/Hovertrax Lux you risk
serious injury or death from collisions, falls or loss of control. To ride
safely, YOU MUST READ AND FOLLOW THE INSTRUCTIONS AND WARNINGS IN THIS MANUAL.
WARNING: Riding any electric product can be a hazardous activity.
Certain conditions may cause the equipment to fail without fault of the
manufacturer. Like other electric ride-on products, the Razor Hovertrax
Prizma/Hovertrax Lux can and is intended to move, and it is therefore possible
to lose control, fall off and/or get into dangerous situations that no amount
of care, instruction or expertise can eliminate. If such things occur you can
be seriously injured or die, even when using safety equipment and other
precautions. RIDE AT YOUR OWN RISK AND USE COMMON SENSE.
WARNING: Failure to read and understand “How to Operate” section of this
manual (pages 7-10) increases risk of injury due to falls or other incidents.
WARNING: NOT FOR RIDERS UNDER AGE 8 OR HEAVIER THAN 176 LB (80 KG). DO
NOT EXCEED THE WEIGHT LIMIT OF 176 lb
(80 kg) – including backpacks and other items that might be carried.
Exceeding the weight limit could injure the rider and damage the Razor
Hovertrax Prizma/Hovertrax Lux. Rider weight alone also does not necessarily
mean a person’s size is appropriate to fit or maintain control of the Razor
Hovertrax Prizma/Hovertrax Lux. Keep this product away from small children and
remember that this product is intended for use only by persons who are, at a
minimum, completely comfortable and competent while operating the product.
Razor recommends that children under the age of 8 not be permitted to use this
product. This recommendation is based not just on age or weight or height – it
reflects consideration of expected maturity and skills as well as physical
size. The recommended rider age of 8 years or older is only an estimate and
can be affected by the rider’s size, weight, or skills – not every rider 8
years old or older will be suited to the product. Certainly, any rider unable
to fit comfortably on the Razor Hovertrax Prizma/Hovertrax Lux should not
attempt to ride it, but a parent’s decision to allow his or her child to ride
this product should be based on the child’s maturity, skill, and ability to
follow rules. Razor emphasizes that adults are strongly advised not to
disregard Razor’s recommendations or permit younger children to ride the Razor
Hovertrax Prizma/ Hovertrax Lux.
Because products, like the Razor Hovertrax Prizma/Hovertrax Lux, can and do
present potential hazards plainly associated with their use, it is well
recognized THE NEED FOR EXERCISE OF PARENTAL RESPONSIBILITY IN SELECTING
RIDING PRODUCTS APPROPRIATE TO THE AGE OF A RIDER, OR PARENTAL SUPERVISION IN
SITUATIONS IN WHICH CHILDREN OF VARIOUS AGES MAY HAVE ACCESS TO THE SAME
RIDING PRODUCTS, IS IMPORTANT. Not every product is appropriate for every age
or size of rider, and recommendations are intended to reflect the nature of
the hazards and the expected mental or physical ability, or both, of a rider
to cope with the hazards.
Persons with any mental or physical conditions that may make them susceptible
to injury, impair their physical dexterity or mental capabilities to
recognize, understand, and follow safety instructions, and to be able to
understand the hazards inherent in a product’s use, should not use or be
permitted to use products inappropriate for their abilities. Persons with
heart conditions, head, back or neck ailments (or prior surgeries to these
areas of the body), or pregnant women, should be cautioned not to operate
this product.
CHECK AND MAINTAIN RAZOR HOVERTRAX PRIZMA/HOVERTRAX LUX
WARNING: Always inspect the Razor Hovertrax Prizma/Hovertrax Lux prior
to use. Properly inspecting and maintaining your product can reduce the risk
of injury. Before use, check to confirm that any and all guards or covers are
in place and in serviceable condition. Check that the parts are functioning
properly, that the tires are not damaged or worn excessively. The Razor
Hovertrax Prizma/Hovertrax Lux should be maintained and repaired in accordance
with the manufacturer’s specifications, using only the manufacturer’s
authorized replacement parts, and should not be modified from the
manufacturer’s original design and configuration. Replace worn or broken parts
immediately.
Always check the battery charge before using the Razor Hovertrax
Prizma/Hovertrax Lux. Do not ride the Razor Hovertrax Prizma/Hovertrax Lux
when its battery is low, as indicated by a flashing red light and beeping. The
Razor Hovertrax Prizma/Hovertrax Lux may stop operating and cause you to fall.
Use only Razor Hovertrax Prizma/Hovertrax Lux charger. WARNING: Check local
laws and regulations to see where and how you may use your Razor Hovertrax
Prizma/Hovertrax Lux legally. Follow all applicable laws for vehicles and
pedestrians.
SAFETY GUIDELINES FOR CONTINUED USE: AN IMPORTANT MESSAGE TO ALL USERS
Periodically review this information and make sure that you understand all
warnings, cautions, instructions and safety topics. Do not let others ride the
Razor Hovertrax Prizma/Hovertrax Lux until they have read this manual. Any
type of wheeled activity can be hazardous. Wheels can, and are intended to
move and it is therefore possible to get into dangerous situations and/or lose
control and/or fall off. In such situations serious injury or death could
occur. Always be aware of the activity around you. Use the Razor Hovertrax
Prizma/Hovertrax Lux in areas free from fixed or moving hazards. Watch your
surroundings for pedestrians, animals and riders of other wheeled devices.
WARNING: Only use the Razor Hovertrax Prizma/Hovertrax Lux indoors or on
completely smooth surfaces. Avoid obstacles and slippery surfaces, which could
result in a loss of balance or traction and cause a fall. See the section on
Terrain for more guidelines.
WARNING: Do not lift the Razor Hovertrax Prizma/Hovertrax Lux off the
ground when the product is turned on. Do not turn on the Razor Hovertrax
Prizma/Hovertrax Lux in mid-air. This will cause the wheels to spin freely
which could result in injury to yourself or damage to things around you.
Ride defensively. Watch out for potential obstacles that could catch your
wheel(s) or force you to swerve suddenly or lose control. Be careful to avoid
pedestrians, skaters, skateboards, scooters, bikes, children or animals who
may enter your path, and respect the rights and property of others. Never
carry passengers or allow more than one person at a time to ride the electric
product.
Never use headphones or a cell phone when riding. Never hitch a ride with
another product.
Do not ride the Razor Hovertrax Prizma/Hovertrax Lux in wet or icy weather and
never immerse this electric product in water, as the electrical and drive
components could get damaged by water or possibly create other unsafe
conditions.
NOTICE: This manual contains many warnings and cautions concerning the
consequences of failing to maintain, inspect or properly use your Razor
Hovertrax Prizma/Hovertrax Lux product. Because any incident can result in
serious injury or even death, we do not repeat the warning of possible serious
injury or death each time such a possibility is mentioned.
Wet, slick, bumpy, uneven or rough surfaces may increase risks. Do not ride
this electric product in mud, ice, puddles or water. Avoid excessive speeds
that can be associated with downhill rides. Never use near steps or swimming
pools.
Do not ride at night or when visibility is limited.
Be careful and know your limitations. Risk of injury increases as the degree
of riding difficulty increases. The rider assumes all risk associated with
aggressive riding activities.
WARNING: Never operate any moving product, including the Razor Hovertrax
Prizma/Hovertrax Lux, while under the influence of drugs or alcohol.
PROPER RIDING ATTIRE
Always wear proper protective equipment, such as an approved safety helmet
(with chin strap securely buckled). A helmet may be legally required by local
law or regulation in your area. Elbow pads, kneepads, wrist guards, a long-
sleeved shirt, long pants and gloves are recommended. Always wear athletic
shoes (lace-up shoes with rubber soles) and keep shoelaces tied and out of the
way of the wheels, motor and drive system. Never ride barefooted or in
sandals.
USING THE CHARGER
The charger supplied with the electric product should be regularly examined
for damage to the cord, plug, enclosure and other parts. In the event of such
damage, the product must not be charged until the charger has been repaired or
replaced.
Use only with the recommended charger.
Use caution when charging.
The charger is not a toy. Charger should be operated by an adult.
Do not operate charger near flammable materials.
Unplug charger and disconnect from product when not in use.
Always disconnect from the charger prior to wiping down and cleaning your
product with damp cloth.
FAILURE TO USE COMMON SENSE AND HEED THE ABOVE WARNINGS INCREASES RISK OF
SERIOUS INJURY. USE WITH APPROPRIATE CAUTION AND SERIOUS ATTENTION TO SAFE
OPERATION.
PRE-RIDE CHECKLIST
Wheels
Practice riding only in wide open areas clear from curbs, parking blocks and
other obstacles, including things you may fall on or into if you lose your
balance. Impacting the wheels against any hard surface can damage the wheels.
Wheels arnot covered under your limited warranty.
Hardware/Loose Parts
Before every ride, check all parts, such as nuts, bolts, fasteners, etc., to
ensure they are secure and assembled correctly. There should not be any
unusual rattles or sounds
from loose parts or broken components. If the product is damaged, do not ride.
Reference “Safety Warnings” on pages 2 and 3 of this manual.
Safety Gear
Always wear proper protective gear, such as an approved safety helmet. Elbow
pads, kneepads and wrist guards are recommended. Always wear athletic shoes
(lace-up shoes with rubber soles) and keep shoelaces tied and out of the way
of the wheels, motor and drive system. NEVER RIDE BAREFOOTED OR
IN SANDALS.
Laws and Regulations
Always check and obey any local laws or regulations.
Storage
Prolonged exposure to UV rays, rain and the elements may damage the enclosure
materials, store indoors when not in use.
Need Help? Visit our website for replacement parts, product support, a list of
authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code
(located on the white label of your product) available for better assistance.
Additional Customer Service contact information is listed at the back of this
manual.
BEFORE YOU BEGIN
Remove contents from box. Remove the separators that protect the components
from damage during shipping. Inspect the contents of the box for scratches or
dents that may have occurred during shipping. Because the Hovertrax Prizma/
Hovertrax Lux was assembled and packed at the factory, there should not be any
problems, even if the box has a few scars or dents. Please keep this box in
case you need to send the Hovertrax Prizma/Hovertrax Lux back for service or
repairs. If you use another box, Razor will not be responsible for any damage
caused during shipping.
MAKE SURE POWER SWITCH IS TURNED “OFF” BEFORE CONDUCTING ANY MAINTENANCE
PROCEDURES.
Estimated Set-Up Time
Allow up to 5 hours for initial charge (see page 6 for charging information).
Charger
Note: Charger design may vary from one shown
WARNING:
DO NOT USE NON-RAZOR PARTS WITH YOUR PRODUCT.
The Hovertrax Prizma/Hovertrax Lux has been built to certain Razor design
specifications. The original equipment supplied at the time of sale was
selected on the basis of
its compatibility with the frame and all other parts. Certain aftermarket
components may not be compatible and will void the warranty.
Product ID Locations: (See locations to the left)
- Frame (Underneath Product)
- Charger
- UPC Side of Box (Not Shown)
Box Contents:
- Hovertrax Prizma/Hovertrax Lux
- Charger
- Owner’s Manual
ASSEMBLY AND SET-UP
Calibration Confirmation
Note: Your Hovertrax Prizma/Hovertrax Lux should have been calibrated at
the factory.
- Place Hovertrax Prizma/Hovertrax Lux on a level surface.
- Turn power ON. If product remains level or adjusts to become level, calibration has been confirmed. No further steps are needed.
If product begins to roll or does not move into a level orientation, see Calibrating Hovertrax Prizma/Hovertrax Lux.
Calibrating Hovertrax Prizma/Hovertrax Lux
- Place Hovertrax Prizma/Hovertrax Lux on a level surface.
- Manually adjust the platforms so they are level to the ground.
- While keeping the product level, turn power ON and HOLD until product beeps and lights flash (approximately 15-20 seconds).
- Turn power back OFF.
- Calibration complete.
Note: Once the product has been calibrated, no matter what position (angle) the platforms are in when it is turned off, the platforms will automatically self-balance themselves back to the calibrated position when product is turned on.
CHARGING THE BATTERY
Your Hovertrax Prizma/Hovertrax Lux comes with a lithium-ion battery pack. Your Hovertrax Prizma/Hovertrax Lux may not have a fully charged battery; therefore you must charge the battery prior to use. Be sure to charge the battery in a clean, dry location away from direct sunlight, flames or sparks.
-
Use only Razor Hovertrax Prizma/Hovertrax Lux charger.
-
Initial charge time: 5 hours.
-
Recharge time: up to 5 hours, even if the light turns green. Recommended maximum charging time is 24 hours.
-
Always charge the battery immediately after riding.
-
Fully charge battery before storing for extended periods of time.
-
Unplug charger from the wall outlet when not in use.
-
Failure to recharge battery periodically may result in a battery that will not accept a charge.
-
Make sure the Hovertrax Prizma/Hovertrax Lux power switch is turned OFF when product is not in use. If the power switch is left on for an extended period of
time, the battery may reach a stage at which it will no longer hold a charge. -
Run time: Up to 40 minutes of continuous ride time. Run time may vary depending on riding conditions, rider weight, climate, and/or proper maintenance.
-
Constant stopping and starting may shorten ride time.
-
Do not charge at or below 32º F (0º C).
-
Do not allow charger or battery pack to overheat. If they seem warm, allow to cool down. Charge only at room temperature.
-
Do not place product or charger in the sun or warm environment. Keep at normal room temperature.
Charger
Note: Charger design may vary from one shown
-
Plug the charger plug into wall outlet. The light on the charger should be green.
Note: If green light (LED) does not turn on, try a different outlet. -
Make sure the power switch isin the OFF position. Plug the charger into the charger port on the Hovertrax Prizma/Hovertrax Lux. The light on the charger should turn red during charging. The light will turn green again when charging is complete.
Model| Voltage
(Nominal) Vdc| Capacity
(Nominal) Ah| Charge
Temperature Range| Operating
Temperature Range
---|---|---|---|---
Hovertrax Prizma/ Hovertrax Lux| 25.2| 2.0| 0° to 40°C
32° to 104°F| -10° to 40°C
14° to 104°F
Battery Power Level Indicator
- Green + Orange + Red Indicator Lights – Battery is sufficiently charged.
- Red + Orange Indicator Lights – Charge product as soon as possible. If you continue to ride the product, the orange light will turn off. The red light will begin flashing and the product will begin to beep.
- Flashing Red Indicator Light and Rapid Beeping – Step off and charge immediately. The battery is out of power and the product will automatically shut off. Do not attempt to ride until product has been recharged.
WARNING: Use ONLY with the recommended charger. Batteries are only to be
charged under adult supervision.
The charger is not a toy. Always disconnect the charger before wiping down
and/or cleaning the Hovertrax Prizma/Hovertrax Lux with a damp cloth.
The charger supplied with the Hovertrax Prizma/Hovertrax Lux should be
regularly examined for damage to the cord, plug, enclosure and other parts. In
the event of such damage, the Hovertrax Prizma/ Hovertrax Lux must not be
charged until it has been repaired or replaced.
Chargers have built-in overcharge protection to prevent battery from being
overcharged.
Wall outlet – Green (stand by) Wall outlet and product – Red (charging)
Wall outlet and product – Green (charged)
Note: Continue charging product even if light turns green prior to 5
hours.
WARNING: Failure to recharge the battery at least once a month may result
in a battery that will no longer accept a charge.
WARNING: The Hovertrax Prizma/Hovertrax Lux will notify you when the
battery charge is dangerously low by beeping. The orange battery indicator
light will turn off and the red light will begin to flash. If these warnings
occur, immediately slow down and safely step off. Turn the product off. Do not
attempt to ride again until the battery is recharged.
HOW TO OPERATE
HOW IT WORKS
The Hovertrax Prizma/Hovertrax Lux responds to the rider’s foot movements.
Remember this. The Hovertrax Prizma/ Hovertrax Lux moves due to fore and aft
foot platform tilt caused by the rider’s foot (or feet).
Movement, speed, and stopping are controlled by the degree to which the
rider’s feet cause the foot platforms of the Hovertrax Prizma/Hovertrax Lux to
no longer be parallel to the ground.
When the product is “ON”, the gyroscopic mechanized balancing feature of the
Hovertrax Prizma/Hovertrax Lux tries to keep the foot platforms of the product
parallel to the ground. In use, Hovertrax Prizma/Hovertrax Lux then detects
changes from “level” which are caused by fore and aft pressure on the foot
platform(s) applied by the rider’s feet. Such changes are interpreted by the
Hovertrax Prizma/Hovertrax Lux as instructions to make the wheels move.
Hovertrax Prizma/Hovertrax Lux tries to re-level a forward tilt by
accelerating, and tries to level a rearward tilt by decelerating.
PERIODIC RECALIBRATION IS RECOMMENDED
The Hovertrax Prizma/Hovertrax Lux self-balancing features are calibrated to
function with a detected “resting position” that is level. Over time and
usage, recalibration may be needed to assure “level” status. If inaccurate
calibration persists, this could affect the operation of the unit by sending
instructions to the motor(s) to move that may differ from the intended motion.
To calibrate the product (see page 5 for additional information):
- Turn power OFF.
- Manually adjust the platforms so they are parallel to the ground.
- Turn power ON and HOLD until it beeps and lights flash (approximately 15-20 seconds).
- Turn power back OFF.
- Calibration complete.
Once the product has been calibrated, no matter what position (angle) the platforms are in when it is turned off, the platforms will automatically self- balance themselves back to the calibrated position when turned on.
MOVING AND CHANGING DIRECTION:
When a rider stands on the Hovertrax Prizma/Hovertrax Lux with an evenly
weighted foot that is “level” on either foot platform• Pressing toes on both
feet downward moves Hovertrax Prizma/Hovertrax Lux forward
- Pressing heels on both feet downward moves Hovertrax Prizma/Hovertrax Lux backward
- Turns are done by putting more downward pressure on the front side of the foot platform on the outside of the turn.
- A rider can spin in place by pushing downward on the front edge of one foot platform while simultaneously pushing downward on the rear edge of the other foot platform.
ACCELERATING AND STOPPING:
-
To go faster or to slow down, press the foot platforms at a greater angle for “more” and reduce the angles for “less”.
-
When slowing or stopping, if you continue to apply force to the edges opposite the direction of travel, you may noonly stop but continue on to reverse your direction.
How does this happen? The fundamental principle is that the Hovertrax Prizma/Hovertrax Lux is designed to be “at rest” when the foot platforms are level – and the gyroscopic mechanized balancing feature detects the “levelness” of the product. This same feature detects foot movements that cause a foot platform to no longer be “level” and it interprets these changes as orders to move.
That’s it. That’s how it works. It does what your feet tell it to do, and the product “self-balances” itself in order to be ready to detect and implement the instructions provided by a rider’s feet.
Understanding this principle is important for obvious reasons. It also suggests some obvious warnings for riding the Hovertrax Prizma/Hovertrax Lux, such as: -
Do not jump up and down on it: If you remove a foot (or both feet), then land back on the Hovertrax Prizma/ Hovertrax Lux and cause the foot platform(s) to change position relative to “level” in any degree, the machine could and will react by moving immediately in response to an “instruction”, which can result in loss of rider stability, balance or control.
-
Shifting Weight Alone is not the Issue: Do not presume that shifting weight alone controls motion – or, for that matter, that not shifting weight equals “stability”. Shifting of rider weight may be associated with increase or decrease of foot pressures on the foot platforms, but it is the action of the feet on the foot platforms which instructs Hovertrax Prizma/Hovertrax Lux to move. Conversely, if you were to shift your weight without altering the placement or angle of your feet, so that the foot platforms remain level, the Hovertrax Prizma/Hovertrax Lux does not receive any “signal” to interpret.
Note: Do not lift the Hovertrax Prizma/Hovertrax Lux off the ground when
it is turned on. Do not turn on the Hovertrax Prizma/Hovertrax Lux in mid-air.
Riding Tip: Certainly the rider may “lean” on the Hovertrax Prizma/
Hovertrax Lux, but leaning only affects the foot platform’s position to the
extent the rider’s feet change their position. If the rider’s ankles are held
at a consistent 90° angle, leaning will result in tilting. Note that leaning
can exaggerate shifting of weight, which may affect the ability of a rider to
recover to a level posture – increasing the possibility of loss of balance.
HOW TO OPERATE
HOW TO CHANGE MODES
Hovertrax Prizma/Hovertrax Lux is ready to ride.
Note: Whatever mode the Hovertrax Prizma/Hovertrax Lux was left in when
turned off, will be the mode it begins in when turned back on.
Note: To go back to training mode, turn power OFF, then press power
switch button ON. Press power switch button twice BEFORE all indicator lights
come on.
HOW TO GET ON
Once you have charged the battery (see page 6 for charging information):
-
Power On: Set the Hovertrax Prizma/Hovertrax Lux on the ground and turn the power on. The battery/power mode indicator will show either one or two lights to indicate mode (see page 8 for instructions on switching modes). Do NOT proceed to step two (2) until all lights on the indicator light up.
-
First Foot: While standing behind the Hovertrax Prizma/Hovertrax Lux, put one foot on a foot platform, closer to the wheel than to the center. Use that foot to activate the foot platform by bringing that foot platform to a balanced, level position.
-
Confirm Activation: Confirm the first foot platform is activated. Move your foot back and forth and feel the response from the product. Play with this single foot platform until you are comfortable keeping the foot platform motion minimal.
-
Step Up: With the first foot platform stable and still, step up on the second foot platform with your second foot. Do this away from furniture and other large objects. Don’t use a fixed object to brace or lift yourself – Keep your weight evenly distributed between the two foot platforms. If you are uncomfortable; step back off and repeat from step 2. Try to stand on the Hovertrax Prizma/Hovertrax Lux without moving.
HOW TO RIDE: -
Stand in Place: Hovertrax Prizma/Hovertrax Lux is unique among two-wheeled items in that the active stabilization it provides allows you to stand in place. A scooter or bicycle may balance more easily when it moves, but a Hovertrax Prizma/Hovertrax Lux can balance even while stationary.
-
Move Forward: To move forward, press down gradually with your feet on the fronts of both foot platforms. Do not lunge forward or lean excessively, as you may lose your balance.
-
Slow Down: To slow down or stop, apply pressure to the rear edges of the foot platforms by pushing down with your heels. Leaning back somewhat may be useful but remember your feet are giving the instructions! If you continue pushing the rear edges with your heels, you will be able to travel backwards.
-
Turn: To turn left, slightly push your right foot down on the front of the right foot platform; to turn right, push down on the front of the left foot platform. This idea is to make one wheel turn a little bit faster than the other wheel.
-
Rotate in Place: To rotate in place, push down on the front of one foot platform while pushing down with equal force on the rear of the other foot platform.
**HOVERTRAX PRIZMA/HOVERTRAX LUX SPEED CONTROL** -
Not too fast: The max speed of this product is 9 mph (14.5 km/h), however the recommended top operating speed is approximately 6 mph (10 km/h). Speed may be affected by rider weight, surface conditions, battery charge, etc. The Hovertrax Prizma/Hovertrax Lux is capable of exceeding the normal operating speed for short
periods, which is designed to permit the wheels to react and “re-balance” the product by helping level itself. Do not attempt to “force” the Hovertrax Prizma/Hovertrax Lux into continuous operation at “re-balance” speeds, as control will be more difficult and falls more likely.
HOW TO GET OFF: -
Slow down and stop
-
Step to the back
-
Power dow
NOTE: If Hovertrax Prizma/Hovertrax Lux is left on for more than 5
minutes, it will automatically turn off and beep.
PRODUCT WARNING SIGNALS
The Hovertrax Prizma/Hovertrax Lux has several built in protection features,
which include:
-
Self-leveling function: If the product is not level when powered on it will slowly rotate until it is level.
Always wait to mount until it has completely stopped self-leveling and all lights on the battery power mode indicator are lit. -
Training Mode: This product can be set to training mode to operate at a slower speed (see page 8 for instructions). Do not operate in normal mode until you are completely comfortable riding in training mode.
-
Low or charging battery: The battery/power mode indicator light (orange) will indicate insufficient charge for operation by flashing and the product will beep.
-
Excessive angle shutoff: At excessively steep foot platform angles, the product will stop powered operation.
Riding Tip: Before your very first ride, expect to spend up to ten minutes in
this stage of learning how to stand comfortably on the
Hovertrax Prizma/Hovertrax Lux.
Self-balancing Function: If product is not level when powered on it will
slowly rotate until it is level. Always wait to mount until it has completely
stopped self-leveling and all lights on the battery/power mode indicator are
lit.
Riding Tip: Hovertrax Prizma/ Hovertrax Lux is best ridden at speeds similar
to a brisk walk, not faster.
Note: All lights flashing notes a leveling error. Do not ride until flashing
stops.
Riding Tip: Your practice on Hovertrax Prizma/Hovertrax Lux should be to keep
the platform in place and get a feel for the motions that are generated from
small changes in your fore/aft foot pressure.
RIDING TIPS
-
Learn to ride the Hovertrax Prizma/Hovertrax Lux in a large, safe area free from all forms of interference.
-
Keep your posture upright, but relaxed. Align your body over the Hovertrax Prizma/Hovertrax Lux and use a wide stance with your feet close to the wheels.
-
Be alert. Scan both far ahead and in front of you – your eyes are your best tool for safely avoiding obstacles and slippery surfaces.
-
Hold your arms comfortably at your side.
-
Start at a slow and comfortable pace. Never aggressively accelerate or lunge forward.
-
Be careful and considerate of others.
-
Always ride under control at a speed that is safe for you and those around you.
-
Always be prepared to stop.
-
Respect pedestrians by always yielding the right of way.
-
Avoid startling pedestrians. When approaching from behind, announce yourself and slow down to walking speed when passing. Pass on the left whenever possible. When approaching a pedestrian from the front, stay to the right and slow down.
HOVERTRAX PRIZMA/HOVERTRAX LUX TIPS
Once you have charged the battery, follow these six easy steps: -
Remember to check for the green battery indicator light before you get on. If it is not lit, the product is not on and you will fall.
-
Do not stand on or near the center or rotating portion of the foot platform.
-
Remember to keep your body relaxed through your back and legs. Stand naturally.
-
Practice controlled stopping.
-
If you stand with one foot on the foot platform with the product on, keep that foot level, or the Hovertrax Prizma/ Hovertrax Lux will move.
-
Be aware of the width of the Hovertrax Prizma/Hovertrax Lux and the path you are traveling. Make sure you will fit.
TERRAIN AND AVOIDING HAZARDS, SLIPS AND TRIPS
The Hovertrax Prizma/Hovertrax Lux is intended for indoors or use on
smooth, flat surfaces. However, to prevent loss of traction, you must always
be careful when riding and learn to identify and avoid slippery and wet
surfaces, loose materials, slopes, potholes and other obstacles.
Stop and step off the Hovertrax Prizma/Hovertrax Lux over unsafe surfaces or
terrain.
The Hovertrax Prizma/Hovertrax Lux wheels must be able to grip the ground for
you to stay upright. Slips occur when the Hovertrax Prizma/Hovertrax Lux loses
traction, potentially causing loss of control and a fall. Abrupt maneuvers and
riding over slippery surfaces, bumps, and loose objects and materials may
cause the Hovertrax Prizma/Hovertrax Lux to lose traction.
- Keep alert.
- Never jump on or off the Hovertrax Prizma/Hovertrax Lux with both feet.
- Please don’t ride transversely on a hillside or turn on a slope. This may cause Hovertrax Prizma/Hovertrax Lux’s balance sensors to be unable to orient themselves to “level” state, impairing rider control.
- Avoid riding over any surface where the undercarriage may strike an object.
- Use caution when riding over any change in terrain.
REPAIR AND MAINTENANCE
WARNING: Risk of fire–no user serviceable parts.
Battery Care and Disposal
Do not store in freezing or below freezing temperatures. To properly maintain
your battery and ensure maximum battery life, carefully read the “Charging the
Battery” section on page 6 of this owner’s manual.
CONTAINS LITHIUM-ION BATTERY PACK. BATTERIES MUST BE RECYCLED. UL 2271
COMPLIANT.
Disposal: Your Razor Hovertrax Prizma/Hovertrax Lux uses a lithium-ion battery
pack which must be recycled or disposed of in an environmentally safe manner.
Do not dispose of a battery pack in a fire. The battery pack may explode. Do
not dispose of a battery pack in your regular household trash. The
incineration, land filling or mixing of batteries with household trash is
prohibited by law in most areas. Return exhausted batteries to a federal or
state approved lithium-ion battery recycler.
Charger
The charger supplied with the electric scooter should be regularly examined
for damage to the cord, plug, enclosure and other parts. In the event of such
damage, the product must not be charged until it has been repaired or
replaced. To reduce the risk of injury, use ONLY with the charger supplied
with this product or a replacement specified by Razor.
Wheels
Wheels and drive system are subject to normal wear and tear. It is the
responsibility of the user to periodically inspect wheels for excess wear.
Replacement Parts
For the complete selection of replacement parts visit
www.razor.com.
Repair Centers
For a list of authorized Razor repair centers:
- Check online at www.razor.com.
- Call 866-467-2967 for the center nearest you.
Recycling Lithium-ion
Batteries: Lithium-ion batteries are recyclable. You can help preserve
our environment by returning your used rechargeable batteries to the
collection and recycling location
nearest you.
In the US and Canada only: For more information regarding recycling of
rechargeable batteries, call toll free
1-800-822-8837, or visit
http://www.call2recycle.org Caution: Do not handle damaged lithium-ion
batteries.
NOTICE: INSURANCE
YOUR INSURANCE POLICIES MAY NOT PROVIDE COVERAGE FOR ACCIDENTS INVOLVING THE
USE OF THIS SCOOTER/ELECTRIC
RIDE-ON PRODUCT. TO DETERMINE IF COVERAGE IS PROVIDED, YOU SHOULD CONTACT YOUR
INSURANCE COMPANY OR AGENT
FCC COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modifications to this unit not expressly approved by
Razor USA LLC, could void the user’s authority to operate the equipment.
WARRANTY
Razor Limited Warranty
The manufacturer warranties this product to be free of manufacturing defects
for a period of 90 days from date of purchase. This Limited Warranty does not
cover normal wear and tear, tires, tubes or cables, or any damage, failure or
loss caused by improper assembly, maintenance, storage or use of the Razor
Hovertrax Prizma/Hovertrax Lux.
This Limited Warranty will be void if the product is ever:
- used in a manner other than for recreation or transportation;
- modified in any way;
- rented.
The manufacturer is not liable for incidental or consequential loss or damage
due directly or indirectly to the use of this product.
Razor does not offer an extended warranty. If you have purchased an extended
warranty, it must be honored by the store at which it was purchased.
For your records, save your original sales receipt with this manual and write
the serial number below.
CUSTOMER SERVICE CONTACT INFORMATION
Need Help? Visit our website for product support, a list of authorized service centers in the US and customer service contact information at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service contact information is listed below:
AMERICAS
Razor USA LLC
P.O. Box 3610
Cerritos, CA 90703
USA
+1 866 467 2967
Monday – Friday
8:00 AM – 5:00 PM Pacific Time
customersupport@razorusa.com| EUROPE,
MIDDLE EAST, AFRICA
Razor USA LLC (Europe)
Handelsweg 2
2742 RD Waddinxveen
Netherlands
+44 (0) 120 267 2702
info@razoreu.com| ASIA
Razor USA LLC (Asia)
P.O. Box 3610
Cerritos, CA 90703
USA
+81 50 7579 6622
info@razor-asia.com
---|---|---
UNITED KINGDOM AND IRELAND
Razor USA LLC (UK)
Unit 20
Hartnoll Business Centre
Post Hill, Tiverton
Devon EX16 4NG
UK
+44 (0) 120 267 2702
info@razoreu.com| AUSTRALIA AND NEW ZEALAND
Razor USA LLC
P.O. Box 4280
Auburn South
VIC 3122
Australia
+1 800 954 354 (AU)
+0 800 003 221 (NZ)
info@razoranz.com| IMPORTED IN JAPAN BY B-PLUS
ASIA
CORP.
Razor USA LLC
THE RIRSTIK COMPANY
Kurokawa 3-1, Asaoku,
Kawasaki, Kanagawa
215-0035 JAPAN
+81 (0) 44 328 9057 Tel
+81 (0) 44 328 9067 Fax
info@razor-asia.com
US Patent No.: 8,738,278 & RE46964 Additional International Patents
Pending
Printed in China for Razor USA LLC.
Copyright ©2003-2022 Razor USA, LLC. All rights reserved.
Razor ® **and the Razor logo design are among the registered trademarks of
Razor USA LLC in the United States and/or select foreign countries.
Patents and **Hovertrax ™ trademark licensed from Inventist, Inc.US_220321
Documents / Resources
|
Razor Hovertrax Prizma and Hovertrax LUX Smart Balancing Electric
Scooter
[pdf] Owner's Manual
Hovertrax Prizma and Hovertrax LUX Smart Balancing Electric Scooter, Hovertrax
Prizma, Hovertrax LUX, Smart Balancing Electric Scooter, Balancing Electric
Scooter, Electric Scooter, Scooter
---|---
References
- Call2Recycle | Leading the Charge For Battery Recycling
- Razor | Scooters and Ride-ons for the whole family
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>