SHARP SDW6767HS 24 Inch Top Control Dishwasher User Guide
- September 7, 2022
- Sharp
Table of Contents
- SHARP SDW6767HS 24 Inch Top Control Dishwasher
- WI-FI SPECIFICATIONS
- Step 1: Wi-Fi Connection
- Option 2: Without a Barcode
- Option 3: Zero Touch Setup
- Step 2: Enable Remote Command & Control
- Alexa Command List
- Dishwasher Cycle and Washing Options
- Washing Options
- Operations and Displays
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SHARP SDW6767HS 24 Inch Top Control Dishwasher
WI-FI SPECIFICATIONS
- Wireless LAN: IEEE802.11b/g/n
- Frequency range: 2.4GHz frequency band
There are three different ways to connect your dishwasher to Amazon Alexa. First, download the Amazon Alexa app, then connect your Dishwasher to Wi-Fi using one of three methods: With a Barcode, Without a Barcode and Zero Touch Setup. Next, you need to enable Remote Command & Control.
Step 1: Wi-Fi Connection
Option 1: With a Barcode
- Touch Power to turn on the dishwasher, then touch and hold Rinse Only and Hi Temp Wash together for 5 seconds until “FR” appears on the display.
- Open the Amazon Alexa app, select Devices and touch + to add a device. Select the type of device and follow instructions to scan the barcode located on the right side of the inner part of the door.
Option 2: Without a Barcode
- Touch Power to turn on the dishwasher, then touch and hold Rinse Only and Wash Zone together for 5 seconds until “UG” appears on the display.
- Open the Amazon Alexa app, select Devices and touch + to add a device. Select the type of device, then select DON’T HAVE A BARCODE? and touch NEXT.
Option 3: Zero Touch Setup
Zero Touch Setup is only available if your dishwasher was purchased through Amazon.com and Zero Touch Setup was applied to your personal Amazon account during checkout. Touch Power to turn on the dishwasher. Open the Amazon Alexa app, and it will automatically pair to your Dishwasher. An active Echo Dot (2nd Gen or later) can also perform Zero Touch Setup.
Step 2: Enable Remote Command & Control
With the Dishwasher connected to Wi-Fi and paired to the mobile app, authorize your appliance to accept control commands from your mobile app or voice commands. To start the network control, touch and hold Rinse Only and START/CANCEL together for 5 seconds until the Wi-Fi indicator stops flashing and remains lit.
Alexa Command List
A
| Cycle Mode Program
Operation Mode
|
Alexa, set dishwasher “A” to “B”
(E.g. Alexa, set dishwasher cycle to auto.)
---|---|---
B
| Auto Heavy Duty
Normal Light
Express Wash Rinse Only
A
| Engage Enable Turn On|
Alexa, “A” “B”
(E.g. Alexa, turn on power wash.)
---|---|---
B
| Power Wash Heat Dry
High Temp Wash Fan Dry Sanitize
Washing Zone
| Alexa, set wash zone to upper Alexa, set wash zone to lower Alexa, set
wash zone to both
---|---
Child Lock| Alexa, turn on child lock
Delay Time| Alexa, set delay to x hour(s) Alexa, set delay start to x
hour(s)
| Enable|
---|---|---
A| Activate Start|
| Turn On| Alexa, “A” or “B” Pause on my dishwasher (E.g. Alexa, turn on
pause on my dishwasher.)
B
| Disable Deactivate Stop
| Turn Off|
Dishwasher Status
Check the current mode| Alexa, what is the dishwasher cycle? Alexa, what is
the dishwasher mode?
Check the current status| Alexa, what is the status on the dishwasher?
Alexa, what is the status in the dishwasher?
Remaining Wash Time| Alexa, what is the dishwasher’s remaining time?
Note: Alexa command list is subject to change without notice. For the latest command list, please visit shop.sharpusa.com.
Dishwasher Cycle and Washing Options
Washing Options
- Delay – Touch and hold Delay until desired delay time is displayed.
- Wash Zone – Not available for Auto and Rinse Only cycles.
- Power Wash – Place heavily soiled dishes facedown in lower rack directly above the Power Wash arm in the back left corner of the dishwasher.
- Fan Dry – Extends drying time for improved drying performance.
- High Temp Wash – Maintains 140°F (60°C) water temperature.
- Heat dry – Operates heater during the drying process.
- Sanitize – Maintains 158°F (70°C) water temperature.
Operations and Displays
- POWER – Touch and hold Power for 3 seconds to turn on/off the dishwasher.
- START/CANCEL – Select desired wash cycle, touch START/CANCEL and close the door within 4 seconds to start wash cycle.
- Display Window – Displays the remaining hours and minutes of the running cycle, delay hours, error codes, etc.
- Wi-Fi Indicator Light – Indicates successful network connection.
- Rinse Aid Indicator Light – Indicates low Rinse Aid level.
- Sanitized Indicator Light – Indicates Sanitized function is complete.
- Child Lock Indicator Light – Indicates Child Lock is enabled. Touch and hold Light and Express Wash together for 3 seconds to disable or enable Child Lock.