HELIOS HS-PWRLOC0 Power Outlet Relocator Kit Instruction Manual
- June 10, 2024
- HELIOS
Table of Contents
HELIOS HS-PWRLOC0 Power Outlet Relocator Kit
Installation Instructions
KIT CONTENTS
TOOLS NEEDED
-
Check plug size from your 1V
-
Center between studs
-
Measure and mark the location for holes with pencil
-
Drill holes with “” provided Hole Saw
-
~ Use Fish Tape to snake the In-Wall Power Cable into the wall ~ with the Female Tip at the top and the Male Tip at the bottom. Use tape to secure the Fish Tape if needed.
-
~ At the top, insert Female Tip into the back ~ side of an In-Wall Housing unit. Repeat at the bottom with the Male Tip.
-
Snap on Female Crown over the Plug Tip and secure with screws. Repeat at the bottom with the Male Tip and Male Crown.
-
Fold in Dog Ears and slide Housing into wall. ‘1ii-‘ Repeat at the bottom with the Male Housing
-
Level and screw Dog Ears until ~ Housing is secure. Repeat at the bottom with the Male Housing.
-
Snap Housing Fascia onto the front of the Housing. ~ Repeat at the bottom with the Male Housing
-
Plug Extension Cord into the bottom device. Q1 Installation is now complete.
Helios, 460 Walker Street, Holly Hill, FL 32117 ©2022 Ethereal Home Theatr