VICOUSTIC GEN_VMT Penray 01 Tiles Instruction Manual
- June 10, 2024
- VICOUSTIC
Table of Contents
VICOUSTIC GEN_VMT Penray 01 Tiles Instruction Manual
Included
Not included
Possible setup examples
One box (12 tiles)
1. Apply Flexi Glue Ultra on the back of the acoustic panel, near the edges and in the center. Do not wait longer than 5 minutes after applying the glue to attach the panel to the wall.
2. Place the panel on the suitably chosen position on the wall. Once in the
desired place, press
firmly against the wall for 15 seconds.
For the installation of Gen Tiles on the ceiling, we recommend using Flexi
Glue Ultra.
To ensure that you maximise the strength of the glue, don’t make any
adjustments to the panel
after bonding.
Do not apply Gen Tiles behind radiators or too close to a heat source.
Main Office, R&D & Logistics
Avenida do Pólo 3, Nº 159, Carvalhosa
4590-137 Paços de Ferreira, Portugal
Office
Rua Quinta do Bom Retiro Nº 16, Armazém 9
2820-690 Charneca da Caparica, Portugal
T (+351) 212 964 100
Info and Sales
E [email protected]
www.vicoustic.com
© Vicoustic, 2023 | V6
No parts of this document might be copied and/or published without written
consent of Vicoustic.
Read More About This Manual & Download PDF: