Amico LCD AIO Powered Cart with Advanced Interface Instruction Manual
- June 10, 2024
- Amico
Table of Contents
Powered Cart with Advanced Interface
Quick Setup, Installation, and Adjustment Instructions
Automatic Height Adjustment
Medical Facility Responsibility
WARNING: This Quick Setup guide is not a replacement for the full manual. It is the responsibility of the end user to ensure all aspects of the installation are covered by following the full manual.
NOTE: Inspect cart integrity prior to beginning setup.
-
First Time Initializing
• Briefly plug the cart into the power outlet the Advanced Interface should turn on (this may take up to 30 seconds).
• After initializing the cart, a “NO HOME” symbol ( ) will appear in the top right hand corner of the Advanced Interface. This means the user must set the cart’s “HOME” (lowest) position. -
Setting Home Position
• Hold the DOWN arrow to lower the cart’s worksurface until the collision symbol ( ) appears.
• Release the DOWN arrow, reverse direction to raise worksurface to desired position. -
Setting Time and Date
• Tap on “GUEST” in top left corner of the interface. (Figure 1)
• Select “ADMIN” from drop down list and log in using password: AMICO. (Figure
- • Tap on “SETTINGS” icon.
• Select “ADMIN SETUP” (only available in the “ADMIN” profile).
• Select “SET CLOCK”.
• Using the arrow icons set the time and date in the desired format (NOTE: date and time formats must first be selected on right of interface).
• Tap “SAVE” to finish.
-
Creating a User Profile
• Tap on “ADMIN” in top left corner of interface and select “LOGOUT” when prompted.
• Tap “GUEST” in top left corner of interface, and select “NEW USER”.
• Enter desired user name, select “NEXT”.
• Enter desired password, select “NEXT” (re-enter password and select “NEXT”).
• Enter the user’s height. Select “NEXT” then “OK” when prompted. -
Setting “SIT” Heights
NOTE: User’s forearms should be parallel to ground (90° bend at elbows) for ergonomic use.
• To input sit and stand positions, select “SETTINGS” and then “USER SETUP”. (Figure 3)
• Adjust the height using the UP/DOWN arrows. When height is at desired “SIT” position, select “SAVE” next to respective position icons. -
Setting “STAND” Heights
• To input “SIT” and “STAND” positions, select “SETTINGS” and then “USER SETUP”. (Figure 3)
• Adjust the height using the UP/DOWN arrows. When height is at desired “STAND” position, select “SAVE” next to respective position icons.
• Tap “OK” twice to return to Main Menu.
For power system software download, please visit http://www.amico.com /hummingbird-power-system
Manual Height Adjustment
Medical Facility Responsibility
WARNING: This Quick Setup guide is not a replacement for the full manual. It is the responsibility of the end user to ensure all aspects of the installation are covered by following the full manual.
NOTE: Inspect cart integrity prior to beginning setup.
-
First Time Initializing
• Briefly plug cart into the power outlet the Advanced Interface should turn on (this may take up to 30 seconds). -
Setting Time and Date
• Tap on “GUEST” in top left corner of the interface.
• Select “ADMIN” from the drop down list and log in using the password: AMICO. (Figure 1)
• Tap on the “SETTINGS” icon.
• Select “ADMIN SETUP” (only available in the “ADMIN” profile).
• Select “SET CLOCK”.
• Using the arrow icons set the time and date in the desired format (NOTE: date and time formats must first be selected on right of the interface).
• Tap “SAVE” to finish. -
Creating a User Profile:
• Tap on “ADMIN” in the top left corner of the interface and select “LOGOUT” when prompted.
• Tap “GUEST” in the top left corner of the interface, select “NEW USER”.
• Enter desired user name, select “NEXT”. (Figure 2)
• Enter desired password, select “NEXT” (re-enter password and select “NEXT”). -
Height Adjustment:
• Pull the lever and adjust to desired height. (Figure 3)
For power system software download, please visit: http://www.amico.com /hummingbird-power-system
Amico Accessories Inc. | 85 Fulton Way, Richmond Hill, ON L4B 2N4, Canada |
www.amico.com
Toll Free Tel: 1.877.264.2697 | Tel: 905.763.7778 | Fax: 905.763.8587 | Email:
info@amico-accessories.com
AA-QG-MOBILE-COMPUTER-WORKSTATION-HUMMINGBIRD-ADVANCED-INTERFACE 09.14.2020
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>