CORN G60 Pro 4G Smartphone User Guide
- June 10, 2024
- CORN
Table of Contents
CORN G60 Pro 4G Smartphone
For more information
Consult the qukk guide in packing box
- Open cellphQl’le serVice and enjoy the following ser11ice:
- Consult the manual
- Get help through various channels such as s.elf-service-, Intelligent QuesUonk’lg and answering, manual servM:e, question feedback. In addition, you can search stores, service networks::, and service policies.
- open settings>About cellphone> Law information, consult law Information.
Cellphone appearance
Card insertion guidance
Tips:
-
Pay attentlOn to notch d1re<:lion in Inserting card and keep the card support
horizontal. -
Please use the standard Nano-SIM card, Insertion of unqualified card may damage
the SIM card support.
Ooubte c.ird settings
- Start up the cellphone through a long touch of power bunon.
- Follow screen tips and enter Home Screen Setlings>Network&lnternet>SIM cards, Choose SI Ml o r SIM2 lor 3G mobile data and default calling
Sale1y Information
- incompatible or unauthorized power supply, charger, and battery may cause fire, explosion, or other hazards.
- Only the accessories accepted by the manufacturers and matched with the type can be used. Only types of accessories may cause accident and violate the warranty and related national regulations. Please contact with the authorized service center for recognized accessories.
- Please do not use high volume for long time to protect hearing.
- Please use the device at rhe temperature from -20’\:-70″‘C. Too high or too low temperature may cause device failure
- Do not expose the device or battery to high temperature place or heat-releasing equipment, such as sunshine, heater, microwave oven, water heater, etc. Battery overheating may cause eJCploslon.
- When charging the device, power socket should be equipped at places near device accessory.
- Please disconnect the charger with the device, and unplug it when it charged well or uncharged.
- If the device is equipped with a non-removable Internal battery, do not replace the battery In case of battery or dev,ce damage. The battery can be only replaced by authorized service centers.
- This device, battery and other accessories should be disposed in accordance with local regulations instead of treated them as domestic garbage. Improper battery treatment may cause battery explosion.
Privacy protection
- Upgrading firmware and systems with unauthorized third-party software may cause cellphone failure or person information leakage.
- Online upgrading and downloading of matched official software are recommended.
- Please backup you personal inform,tion before up, reading u vote.Jr per$on information may be removed.
Safety standards
- Content of harmful substance In this homogeneous material is below the limit of GB/T26572 standard.
- The harmful substance content of this homogeneous material at least exceeds the limit of the GB/T26572 standard. However, there Is no better alternative at resent.Thus, it meets the environmental protection reqt.Jirement of EU RoHS.
- The number of this logo indicated that its normal EPUP is 20 years. Some accessories may also have the EPUP logo and the nt.Jmber in the logo prevails. This product may not include all the accessories due to different types, and It should be subject to the actual configuration.
- GSM, 850/900/1800/1900MHZ
- WCOMA, B 1/B2/B4/B5/B8
- FOO 81/B2/3/4/5/7/B8/12/17 /28A/28B/B66
FCC Warning
Any changes or modifications not expressly approved by the party responsible
for
compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the
following two conditions;
- This device may not cause harmful Interference, and
- This device must accept any Interference received, including Interference that may cause undesired operation.
Note: This equipment has betn tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with the insuuctions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna Increase the separation between the equipment and the receiver
- Connect the equipment Into an outlet on a circuit different from that to which the receiver Is connected.
- Consult the dealer or an e11:perienced radio/TV technician for help SAR tests are conducted using standard operating positions accepted by the FCC with the phone transmi1tin1 at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest cert1f1ed power level, the actual SAR level of the phone while operating can be well below the maximum value, m general, the closer you are to a wireless base station antenna, the lower the power output. Before a new model phone is available for sale to the public, it must be 1es1ed and certified 10 the FCC in that does not exceed the exposure limit established by the FCC, Tests for each phone are performed in positions and locations. g. at the ear and worn on the body) as required by the FCC. For body-worn operation, this model phone has been tested and meets the FCC RF exposure guidelines when used with an accessory designated for this product or when sued with an accessory that contains no metal and that positions the handset a minimum of 1.0cm from the body.
- Noncompliance with the above restrictions may result in violations of RF exposure guidelines.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>