tracer HardWire 5 m 8 mm LED WiFi Instructions
- June 4, 2024
- Tracer
Table of Contents
tracer HardWire 5 m 8 mm LED WiFi
Instructions for use
INSTRUCTIONS FOR USE WITH SMARTPHONE
Camera is compatible with Android platform-based devices, IOS and PCs through dedicated software.
- Download “WIFI CHECK” app from the store:
- https://www.tracer.pl/gfx-base/files/TRA/KAM/46628/ster_46628.exe
- GOOGLE PLAY https://play.google.com/store/apps/details?id=com.joyhonest.wifi_check
- APP STORE https://apps.apple.com/us/app/id1446825275
- Switch on the camera by holding the ON button for 3s – until two STATUS LEDs are on.
- Device enables WIFI.
- Search the relevant WiFi; find the relevant network’s name starting with “wifi check_” (the consecutive numbers of the name are individual numbers of your device). After the net has been chosen, your device will connect with the endoscope camera.
- Enable the WIFI CHECK app, confirm the image from the endoscope camera.
INSTRUCTIONS FOR USE WITH PC / LAPTOP (WITH WINDOWS)
If device is connected to a laptop, the camera may only be connected using USB port (WiFi function available solely with smartphones).
- Download “view play cap” software using the product card; use: www.tracer. pl/TRAKAM46628
- Unzip RAR and install software.
- Connect camera to computer’s USB and load view play cap app
- Select “Device” and “USB.2.0 PC Camera”, camera image will be displayed onscreen
- Select the SNAPSHOT icon to take a photo
- Video recording:
- a. Select FILE in the main menu and then “Set Capture File” to make a video record (identify location and file name).
- b. Click CAPTURE on MENU screen. Record will be stored in the identified file location.
CHARGING THE ENDOSCOPE CAMERA
- Connect the micro USB/USB cable to the micro USB output, USB cable terminal to charger (not included) or any USB port on the computer. A red charging status LED is on. When the device is fully charged, the LED will turn GREEN.
Special security features
- Endoscope camera enabling the viewing of places difficult to reach at home, in a car, etc. Product not intended for observation of body parts difficult to reach, e.g. throat, ear, etc.
- Endoscope camera WiFi module has an in-built battery – do not expose to moist or flooded areas.
- Do not expose the endoscope camera WiFi module to excessive exposure to high temperature of direct sunlight.
- Even if the endoscope camera is not in use, it is recommended to charge the battery on a monthly basis to maintain its original capacity.
- Charge the camera as per the relevant instructions herein.
- In the event of a suspected failure, contact the authorized, professional service.
Technical specification
- Resolution: 1600 x 1200,
- Number of frames per second: 30 FPS
- Viewing angle: 70’
- Lithium battery: 3,7V 500 mAh
- 6 LEDs with the light intensity adjustment
- Water tightness level: IP68 (only the lens with a dedicated terminal)
- Cable length: 5m
- Charging: 5V — 0,38A
- Charging duration: 2 h
- Photo format: JPG
- Video format: AVI
- Working temperature: from 0⁰C to 70⁰C
Package contains
- 1 x endoscope camera with LED LIGHT INTENSITY ADJUSTMENT (remote control on the cable)
- WIFI MODULE with charging system and ON / OFF or CAPTURE button.
- USB charging cable – microUSB
- 1 x USB micro adapter
- 1 x sealing overlay
- 1 x overlay with mirror (for mirror viewing at 45%)
- 1 x overlay for terminal fixing (hook, magnet)
- 1 x hook
- 1 x magnet
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>