ARTCHIRLY BTC2173MOWH 12 Inch Rough In 1 piece 1.28 GPF Dual Flush Elongated Toilet Instruction Manual

ARTCHIRLY BTC2173MOWH 12 Inch Rough In 1 piece 1.28 GPF Dual Flush

Elongated Toilet

INSTALLATION INSTRUCTIONS CARE AND MAINTENANCE

ONE-PIECE DUAL FLUSH TOILET
1.6Gpf/1.1Gpf(6.0Lpf/4.0Lpf)
Model no : BT C2173MO WH

To ensure this product is installed properly, please read these instructions carefully before you begin.
(Certain installations may require professional help.) Also, be sure your installation conforms to local codes.

CAUTION : HANDLE WITH CARE. VITREOUS CHINAWARE IS FRAGILE WITH SHARP EDGES IF BROKEN.
NOTE : Pictures may not exactly define the contour of China and its components.

RECOMMENDED TOOLS AND MATERIALS

• Putty Knife
• Hacksaw
• Flathead Screwdriver
• Flexible Supply Hose
• Adjustable Wrench
• Water Supply Kit
• Sealant
• Carpenters Level
• Tape Measure

REMOVE OLD TOILET

• Turn off the water supply valve and flush the tank completely. Towel or sponge the remaining water from the tank and bowl.

• Disconnect and remove the old water supply line.
  NOTE : If replacing the valve, first shut off the main water supply!

• Remove old mounting hardware, remove the toilet, and plug the floor flange to block sewer gases from escaping.

• Remove closet bolts from the flange and clean away old wax, putty, etc. from the base area.

NOTE : MOUNTING SURFACE MUST BE CLEAN AND LEVEL BEFORE THE NEW TOILET IS INSTALLED

ROUGHING-IN DIMENSIONS

NOTE : Distance from wall to closet flange centerline must be as listed on chart

INSTALL CLOSET BOLTS

Insert floor bolts into the flange channel with the bolt head down (use plastic retaining washers to hold the bolts in full length. Floor bolts should be parallel to the wall and 6″(152mm) apart.

INSTALL WAX RING

Turn the toilet bowl down onto a towel or cushioned surface. Place the wax ring around the draining outlet of the bowl and press firmly enough. Apply a thin bead of sealant around the toilet base.

POSITION TOILET BOWL ON FLANGE

• Unplug the floor waste opening, and gently place the bowl in position with the floor bolts protruding up through the hole in the base.
• Press down with a slight twisting motion on the top center of the bowl to compress the wax ring creating a water-tight seal.
• Place plastic discs, metal washers, and nuts on floor bolts.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>