HOME DECORATORS COLLECTION HD7837F Table Lamp Instruction Manual
- June 10, 2024
- HOME DECORATORS COLLECTION
Table of Contents
HOME DECORATORS COLLECTION HD7837F Table Lamp
Product Information: Table Lamp
The Home Decorators Collection Table Lamp, model number HD7837F, is a portable light designed to enhance your home. It has been manufactured with the highest standards of safety and quality and is engineered to safely use a self- ballasted LED bulb in place of an incandescent bulb for energy savings.
Safety Information
Before assembling the lamp, spread all parts out on a clean surface and inspect each part for defects that may have occurred during shipping. Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire, do not continue the assembly process. Consult a qualified electrician if you have any electrical questions. If you have any non-electrical questions about this fixture, please call our Customer Service Team at 1-800-986-3460 or visit HOMEDEPOT.COM/HOMEDECORATORS. Please reference the model and item numbers.
Warranty
The Home Decorators Collection Table Lamp comes with a five-year warranty. The manufacturer warrants the product against defects in materials and workmanship for five years from the date of purchase. The manufacturer does not warrant and specifically disclaims any warranty, whether expressed or implied, of fitness for a particularpurpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor/expense costs involved in the replacement or repair of said product.
Product Usage Instructions
Step 1: Before assembling the lamp, spread all parts out on a clean surface and inspect each part for defects that may have occurred during shipping.
Step 2: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire, do not continue the assembly process. Consult a qualified electrician if you have any electrical questions.
Step 3: Place the lamp on a soft, non-abrasive surface, such as carpet or cardboard.
Step 4: Install two 60W maximum medium base (E26) type A or 9W maximum medium base (E26) self-ballasted LED bulbs (sold separately).
Step 5: Turn on the lamp and enjoy your new Home Decorators Collection
Table Lamp!
Safety Information
READ AND SAVE THESE INSTRUCTIONS.
- This product has been manufactured with the highest standards of safety and quality.
- For energy savings, this portable light has been engineered to safely use a self-ballasted LED bulb in place of an incandescent bulb.
- Before assembling your portable light, spread all parts out on a clean surface. Inspect each part for defects that may have occurred during shipping.
DANGER : Inspect the wire insulation for any cuts, abrasions, or exposed
copper that may have occurred during shipping. If there is a defect in the
wire, do not continue the assembly process.
CAUTION : CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL
QUESTIONS. If you have any
non-electrical questions about this fixture, please
call our Customer Service Team at
1-800-986-3460 or visit
HOMEDEPOT.COM/HOMEDECORATORS. Please reference the model and item numbers.
Warranty
FIVE (5) YEAR WARRANTY
WHAT IS COVERED
The manufacturer warrants this fixture to be free from defects in materials
and workmanship for a period of five (5) years from the date of purchase. This
warranty applies only to the original consumer purchaser and only to products
used in normal use and service. If this product is found to be defective, the
manufacturer’s only obligation and your exclusive remedy, is the repair or
replacement of the product at the manufacturer’s discretion, provided that the
product has not been damaged through misuse, abuse, accident, modifications,
alteration, neglect, or mishandling. This warranty shall not apply to any
product that is found to have been improperly installed, set up, or used in
any way not in accordance with the instructions supplied with the product.
This warranty shall not apply to a failure of the product as a result of an
accident, misuse, abuse, negligence, alteration, faulty installation, or any
other failure not relating to faulty material or workmanship. This warranty
shall not apply to the finish on any portion of the product, such as surface
and/or weathering, as this is considered normal wear and tear.
WHAT IS NOT COVERED
The manufacturer does not warrant and specifically disclaims any warranty,
whether expressed or implied, of fitness for a particular purpose, other than
the warranty contained herein. The manufacturer specifically disclaims any
liability and shall not be liable for any consequential or incidental loss or
damage, including but not limited to any labor/expense costs involved in the
replacement or repair of said product.
Contact the Customer Service Team at
1-800-986-3460 or visit
HOMEDEPOT.COM/HOMEDECORATORS.
Pre-assembly
PLANNING ASSEMBLY
- Read all instructions before assembling.
- To avoid damaging this product, place it on a soft, non-abrasive surface, such as carpet or cardboard.
IMPORTANT : Inspect the wire insulation for any cuts, abrasions, or
exposed copper that may have occurred during shipping. If there is a defect in
the wire, do not attempt installation. Please call the Customer Service Team
at 1-800-986-3460.
NOTE : This product requires two 60W maximum medium base (E26) type “A”
or 9W maximum medium base (E26) self-ballasted LED bulbs (sold separately).
PACKAGE CONTENTS
| Part | Description | Quantity |
|---|---|---|
| A | Shade | 1 |
| B | Stem assembly | 1 |
| C | Socket assembly | 1 |
| D | Base | 1 |
| E | Power cord | 1 |
NOTE : A new Tiffany lamp shade has an oil film applied to the shade that
protects the Tiffany shade from scratches during shipment. If the oil applied
is too heavy you can remove the excess oil film with a paper towel. Gently
wipe away the excess oil.
For general cleaning of Tiffany shades, use a gentle lemon
oil-based furniture polish applied to a soft cloth and wipe gently. If a white
powder appears on the soldered joints of the Tiffany shade, this is a normal
oxidation process. Use a small amount of lemon oil or mineral oil applied
directly to oxidized areas and the soldered area will return to like new.
Assembly
- Attaching the socket assembly
- Thread the socket assembly (C) and the base (D) together as shown. Hand-tighten until snug.
- As you thread the socket assembly (C) and the base (D) together, continuously pull the power cord (E) from the bottom of the base (D).
- Attaching the stem assembly
- Remove the rubber washer (2) and the finial (1) from the stem assembly (B) and keep the rubber washer (2) and the finial (1) for later use.
- Thread the short threaded end of the stem assembly (B) onto the coupling of the socket assembly (C) .
- Hand-tighten until snug.
- Attaching the shade and the light bulbs
- Place the shade (A) and the previously removed rubber washer (2) over the stem assembly (B).
- Secure with the previously removed finial (1).
- Hand-tighten until snug.
- Install the correct bulbs (not included) referring to fixture markings and/or labels for maximum wattage.
- Plug the power cord (E) into the outlet, turn on the switch and enjoy.
NOTE : Uses two 60W maximum medium base (E26) type “A” or 9W maximum medium base (E26) self-ballasted LED bulbs (sold separately).
NOTE : If the finial (1) is not snug against the shade (A), adjust the big knurled nut (3) to the proper location for the shade (A) and the finial (1 ).
Care and Cleaning
- Use a dry, soft cloth to dust or wipe carefully.
- Do not clean with abrasive materials, bleach, or solvents.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| The light(s) will not turn on. | The bulb is burned out. | □Replace the light |
bulb.
The power is off.| □ Ensure the power supply is turned on.
The cord is not plugged in.| □Ensure the cord is plugged into an outlet.
The circuit breaker is off.| □Ensure the circuit breaker is set in the “ON”
position.
The fuse blows or the circuit breaker trips when the light is turned on.|
There is an exposed wire.| □ Discontinue use of the light.
□ Check the wire connections.
□ Contact a qualified electrician or call the Customer Care Service Team at 1-800-986-3460.
Service Parts
MODEL: HD7837F
| Part | Description |
|---|---|
| A | Shade |
| B | Stem assembly |
| C | Socket assembly |
| D | Base |
| E | Power cord |
Questions, problems, missing parts? Before returning to the store, call Home
Decorators Collection Customer Ser vice
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS
Retain this manual for future use.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>