Baetaey WHT-300mbps WiFi Range Extenders Signal Booster for Home-User Instructions

: June 4, 2024
: Baetaey

Table of Contents

Baetaey

Baetaey

Baetaey-WHT-300mbps-WiFi-Range-Extenders-Signal-Booster-for-
Home

Baetaey WHT-300mbps WiFi Range Extenders Signal Booster for Home

Specifications

BRAND: Baetaey
COVERAGE: 9000 Sq. ft
COMPATIBILITY: All Standard Wi-Fi Router
TRANSMISSION RATE: 300Mbps at 2.4GHz
CONNECTED DEVICES: 45 devices
PACKAGE DIMENSIONS: 10.28 x 3.62 x 2.13 inches
ITEM WEIGHT: 7.8 ounces

Introduction

Dead Zones are no longer! We can successfully remove the bothersome Dead Zones from your property. Stop buffering now! We can give you a faster, more reliable network signal and let you say good-bye to bufferings. The complicated setup is over! We can significantly increase your Wi-Fi signal range, and we guarantee that you can complete the connection in a few minutes. With our ultra-fast internet and stable signals, you may play online games and watch videos at home whenever you want, anywhere. Our Wi-Fi repeater can reach your bedroom, basement, yard, etc. without losing signal. Signal is unaffected when travelling through walls and up to the bedroom, basement, garage, and garden. Signal is unaffected when travelling through walls and up to the bedroom, basement, garage, and garden. Having 4 high-gain antennas helps the wireless network expand to span up to 9000 square feet and 45 devices.

HOW TO KNOW IF WIFI EXTENDER IS WORKING

To see whether your extender is connected to the internet, go to Settings > Status. If everything seems good as shown below, your extender has connected to your router successfully. Your devices can be wired or wirelessly connected to the extender using Ethernet cables.

HOW TO RESET WIFI EXTENDER TO A NEW WIFI

Unplug the Wi-Fi Extender from the wall to reset it and connect it to a new router. Plug in the new router, then turn off the old one. Press the WPS button on both the router and the Wi-Fi extension, then plug the extender back into the wall.

HOW TO FIND IP ADDRESS ON WIFI EXTENDER

To access the range extender’s web-based configuration page, launch a browser.
NOTE: If you haven’t yet set up your range extender, its IP address is 192.168.
Click Device Info under Status in the left navigation.

HOW TO CONNECT WIFI EXTENDER TO ROUTER WITHOUT WPS

Find the Ethernet cable that connects your router to your PC and unplug the end that is attached to it. Next, connect it straight to the range extender. By doing this, an Ethernet connection between the range extender and the PC will be established.

HOW TO KNOW IF WIFI EXTENDER IS NEEDED

You must take action to strengthen your WiFi signal if it is weak and this is the cause of poor network performance. If your WiFi signal is strong but has trouble spreading across your house, especially if it’s a big house with numerous stories, think about getting a WiFi extender or mesh WiFi.

Should I always have my WiFi extension on?****

Your choice as to whether to leave your Wi-Fi range extender on or turn it off while not in use is entirely up to you. It uses a very tiny amount of power—almost none at all.

How durable are WiFi extenders?****

Every three to five years, or if you observe a decline in performance, you might want to think about upgrading your Wi-Fi extender if it serves a crucial purpose.

Do WiFi extenders operate on their own?****

It varies. Your wireless device will automatically switch to the extender’s network if you are completely outside of the router’s coverage area. Your wireless device may, however, be able to detect both your native WiFi networks and the WiFi extenders network in some locations.

What location is ideal for a WiFi booster?****

The extender should be placed halfway between your wireless router and your PC, but it MUST be inside the wireless router’s coverage area. Reposition the Extender closer to the device while still within the router’s wireless range if you must utilize a different location.

A WiFi extension may get too hot.****

It will produce heat because it is an electrical appliance and a network device, so please set it somewhere that is open and breezy. In the interim, try plugging it into a different socket and make sure the firmware is current.

How much electricity is consumed by a WiFi booster?****

The typical rated wattage of a WIFI router ranges from 3 watts to 20 watts, to give you an idea. You can use 6 watts as the rated power for calculations when it comes to typical residential WiFi routers.

What causes WiFi extenders to malfunction?****

It might be impossible for the old Wi-Fi extender to connect to your Wi-Fi router. The outdated extender configurations do not work with the upgraded Wi- Fi router’s configuration. To fix this issue, try upgrading your extender to the newest router version.

Why should I learn more about WiFi extenders?****

In actuality, WiFi extenders can increase the wireless network’s range. However, a number of factors, including as the speed of the internet connection entering your home, the distance from your router, the regions of your home that require WiFi coverage, and the WiFi requirements of your family, limit their efficiency.

What distinguishes a WiFi booster from a WiFi extender?****

A wireless booster is used to close the gap when two or more hosts need to connect to one another using the IEEE 802.11 protocol but the distance is too great for a direct connection to be made. To increase your WiFi network’s coverage area, utilize a WiFi extender.

Does a WiFi extension affect the speed of the Internet?****

I am aware that it is frequently asked whether using a WiFi extender slows down Internet speed. Despite the awkward wording, the truth is that it has no effect on your Internet speed.

Can I relocate my WiFi extension without unplugging it?****

As long as you are within a decent range, you can relocate the extender to a new outlet without having to repeat the setup process.

Is proximity to the router required for a WiFi extender?****

The extender needs to be placed halfway between the Wi-Fi router and the dead zone in order to be successful. You need to be close enough to the router so that it can connect to your network and far enough away from the dead zone for the new signal to be effective.

How many WiFi extenders are allowed in a single home?****

There are two extenders available. However, it can result in the second one’s performance being less than ideal. Additionally, you can daisy-chain additional WiFi extenders, but doing so might lower your device’s throughput. As a result, you might want to think about joining each extender to the primary router.

Is WiFi energy-intensive?****

The average WIFI router stays switched on all day long and accounts for 1 to 5% of your electricity consumption. Therefore, it is crucial to determine the WIFI router’s power usage. The router typically uses between 15 and 100 watts of energy.

What speed WiFi extension do I require?****

Even though it tops out at the relatively outdated 802.11n Wi-Fi standard, the top 300 Mbps speed across 2.4GHz should be adequate for all but the most demanding users. However, that does imply a very low cost, which makes this ideal for network expansion on a tight budget.

Can a WiFi booster improve cellular signal?****

Regrettably, no. There are currently no antennas available on the market that can increase both WiFi and cellular signal strength because the signal frequencies are so dissimilar.