TOPDON T-Darts Transponder and Remote Tester Tool User Manual
- June 10, 2024
- TOPDON
Table of Contents
TOPDON T-Darts Transponder and Remote Tester Tool
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
What’s in the Box
Product Overview
-
Vehicle Key Slot
-
Key Transponder Slot
-
Power Indicator (Solid blue: power on)
Note: When performing the Frequency Detection function, every time you press the vehicle key button, this indicator will flash blue, indicating the frequency testing process. -
Bluetooth Connection Indicator (Solid green: Bluetooth connected)
-
Power Button (Press and hold the button to turn on the T-Darts.)
Note: When powered by 4 AAA batteries, the T-Darts will automatically turn off if no operation is performed within 5 minutes. -
USB Type-C Port
-
Frequency Induction Antenna
Detects remote frequency at a standard distance of 1-10 cm (0.4 to 4 inches). -
Battery Compartment
Accepts 4 AAA batteries (not included).
Basic Operation
Download & Install the App
Please go to the App Store or Google Play and search for TopScan to download
and install the app to your phone.
Register & Log In
Open the app and log in to your TOPDON account. (If you do not have an
account, please register with your email.)
Turn on the T-Darts
Install 4 AAA batteries (not included) and press and hold the power button
to turn on the T-Darts. The T-Darts can also be powered by an external USB
power source. The T-Darts will automatically power on when it is connected to
a power source via its USB Type-C port.
Bind the T-Darts
-
Tap Me > T-Darts Management > Add T-Darts.
-
To get the serial number and activation code, please scan the QR code on the product.
Alternatively, tap the T-Darts icon at the top right of the activation screen to establish Bluetooth connection. Once the Bluetooth connection between the T-Darts and your phone is established, the serial number and activation code will be automatically obtained. -
Tap Activate.
Bluetooth Connection
Tap T-Darts from the home screen, and tap the gray T-Darts icon at the
top right of the screen to establish Bluetooth connection with the T-Darts
unit. After the T-Darts successfully connects, the icon changes to T-Darts
, while the Bluetooth connection indicator on the T-Darts illuminates green.
Your T-Darts Is Now Ready for Use
Follow the on-screen instructions to perform the Transponder Recognition,
Frequency Detection and Test IMMO / PKE Coil functions.
- Transponder Recognition – Read transponder information.
- Frequency Detection – Test remote control frequency. The testable frequency range is as follows: 300~320MHz, 430~434MHz, 868MHz, 902~915MHz.
- Test IMMO / PKE Coil – Test IMMO / PKE low frequency coil (supports 125kHz and 134kHz frequency bands).
IMMO Coil: For vehicles equipped with a blade key, the IMMO coil is usually located in the ignition switch. For vehicles equipped with a smart key, the IMMO coil is usually located in the Engine Start Stop button, steering column, cup holder or the armrest storage compartment.
PKE Coil:
Generally, only vehicles with Passive Keyless Entry (PKE) systems will have
a PKE coil, which is usually located in the driver door handle, or in the
B-pillar of the vehicle body for some models.
Note: When performing the Frequency Detection and Test IMMO / PKE Coil functions, the terminal device (your phone) will make a beep sound if the T-Darts detects a frequency.
Specifications
- Working Voltage: 2.5V ~ 3.3V
- Power Requirements: 4 AAA batteries or external USB power source
- Dimensions : 5.49 × 2.83 × 1.11 in. (139.5 × 72.0 × 28.2 mm)
- Net Weight: 100 g (3.53 oz)
Warranty
FCC Requirement
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Notice: All information in this manual is based on the latest information
available at the time of publication and no warranty can be made for its
accuracy or completeness. TOPDON reserves the right to make changes at any
time without notice.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and canradiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.
- Consult the dealer or an experienced radio/TV technician for help.
TEL: 1-833-629-4832 (North
America)
EMAIL: SUPPORT@TOPDON.COM
WEBSITE: WWW.TOPDON.COM
FACEBOOK: @TOPDONOFFICIAL
TWITTER: @TOPDONOFFICIAL