BWE A-91020-GB Bath Hardware with Towel Bar Towel Hook Toilet Paper Holder User Guide
- June 10, 2024
- BWE
Table of Contents
A-91020-GB Bath Hardware with Towel
Bar Towel Hook Toilet Paper Holder
User Guide
THANK YOU
We appreciate the trust and confidence you have placed in BWE through the
purchase of this bathroom accessory kit.We strive to continually create
quality products designed to enhance your home. Visit us online to see our
full line of products available for your home improvement needs. Thank you for
choosing BWE!
Pre-Installation
PLANNING INSTALLATION
Before you begin to install this product, ensure that all parts are
present. Compare parts with the package contents list. If any part is missing
or damaged, do not attempt to install the product.
If installing into ceramic tile, the plastic white drywall anchor provided
cannot be used and a separate purchase of standard solid wall anchors is
required.
- Inquire at the retailer where you purchased your accessories for solid wall anchors and screws.
TOOLS REQUIRED
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
BATH ACCESSORY KIT
Part| Description
1| Mounting Scrcw
2| Solid Wall Anchor
3| L-shape hex wrench
4| Set Screw (Preassembled to bathroom accessory)
5| Mounting Bracket
Installation
Determining the mounting location
1.1 For towel ring and paper holder Determine the location where you wish
to install your accessory.
Place the mounting brackets at the desired location and mark the installation
holes using a pencil.
1.2 For towel bar
Tape the template to the wall with masking tape and ensure it is completely
level
Use a level to determine the location where you want to install your
accessory.
Drilling the pilot hole
2.2 For towel bar
Safety Information
If installing into ceramic tile, before attempting to drill through ceramic
tile , the following mustbe done:
Using a center punch, very lightly and carefully tap the spot where you wish
to drill to break the
Installing the brackets in ceramic tile
- Drill 1/4 in. based on the pre-drill pilot hole.
- Tap 1/4 in. Solid wall anchors into the wall with a hammer until flush with the wall.
- Align the mounting brackets with installed solid wall anchors and secure with the mounting screws.
Installing the bathroom accessory
NOTE: If you are hanging the towel bar, proceed to Step 5 Position the
bathroom accessory over the mounting brackets and attach using the set screw.
Tighten securely with the flathead screwdriver. 
Installing the towel bar
Slide each end of the bar (1) into the two posts (2).
Attach the towel bar to the mounting brackets using the set screws. Tighten
securely with flathead screwdriver.
Care and Cleaning
These bath accessories are designed for years of trouble-free performance. Keep them looking new by doing the following:
- Clean periodically with a soft cloth.
- Avoid abrasive cleaners, steel wool, and harsh chemicals as these will dull the finish and void your warranty.
Questions, problems, missing parts?
Before returning to the store,
call BWE Customer Service
8a.m. – 7p.m., EST Monday – friday,
Phone: 917 ) 863-7105
Email: sales2@bwefaucet.com