SHOKZ C6 Bone Conduction Headphone User Manual

SHOKZ C6 Bone Conduction Headphone

Overview

1. Volume + Button
2. MFB Button
3. lndicator LED
4. Microphone
5. Volume – Button
6. Type-C Charging Port

• As shown below, put the headphone around your neck with the speakers resting on the bone in front of your ears, not on your ears.
• lf you do not like being disturbed by external sounds when using the headphone, you can use it with earplugs(provided). The usage method is as follows:

1. Rub the earplugs into thin strips with a dry and clean hand, pinch the earplugs with this hand.
2. With the other hand, lift the ear upward and hold it, slowly and gently rotate the earplug into the ear,
3. Gently adjust to the most comfortable state and wait 30-40 seconds for the entire earplug to fully rebound.

NOTE: To avoid injury to the ear, be sure to gently and slowly rotate the earplugs in and out.

1. Press and hold the MFB button for 3 seconds to power on, and then the indicator flashes blue-red to wait to pair.
2. Turn on your phone’s Bluetooth, search for and click”C6″.
3. Pairing successful with a voice prompt “Connected”,

NOTE:

a. After the headphone is disconnected from the phone, it will automatically enter the pairing state and shut down after 5 minutes,
b. When there is a pairing record, just power on, the headphone will automatically connect to the phone.

Charging

Use the Type-C charging cable(provided) to connect your computer(with power on) or an adapter(not provided) to the headphone. The indicator will stay red when charging and stay blue after fully charging,

NOTE: The power level down to 3.3V starts to alarm, there will be a voice prompt ” Battery Low ” every 60S with the indicator flash red once every 5S,

Specification

• Model: C6
• Version: V5,3
• Transmission Distance: 33 feeV10 meters (open space) Supporting Protocols: HFP, A2DP, AVCTP, HSP, AVRCP Impedance: 80
• Battery Capacity: 3.7V/150mAh
• Talk/Music Time: 7-10 Hours
• Charging Time: 2-2,5 Hours
• Item Size: About 13610249mm
• Item Weight: 30g

Safety Instruction

• When using while walking, pay close attention to the surrounding traffic. It may cause a traffic accident.

• To protect your ears, do not turn up the volume too much.

• If the product drop into a flammable liquid such as water, please stop using it and contact us on Amazon. If you still continue to use it, it may cause a fire, malfunction, or electric shock.

• Opening the inside may cause a malfunction or electric shock. Do not touch the inside. In addition, we do not guarantee performance if the inside is modified by people.

• Do not charge it with wet hands or touch the charging port. It may cause electric shock.

• If you feel sick while using this product, please stop using it immediately,

• If you are using a medical device such as a pacemaker, consult your doctor before using it.

• Do not allow small children to use it.

• Store your headphones in a cool, dry place, Operating temperature 0-45°C(32-113°F).
  Working in a cold/hot loop mirror or in a highly humid place can reduce battery life, After storing it for a long time, please charge it before use.

• This BT headset is water resistant, but not completely waterproof. It can’t be placed in water for a long time and cannot be used for diving. If there is water, wipe it off with a clean soft cloth,

• Clean the headphones with a soft, dry cloth.

• Do not touch any sharp objects to the headphones.

• Do not place the headphones under a very high or low-temperature ring mirror

Q&A

• Q: My headphones don’t turn on,
• A: The battery level is low. Charge the headphones.
• Q: I cannot pair my headphones with my device. A: Check whether the connected device supports Bluetooth, download or update the Bluetooth driver of the connected device
• A: The Bluetooth is disabled, Enable the Bluetooth feature on your Bluetooth device and turn on the Bluetooth device before you turn on the headphones.
• A: Resetting the headphone,

FCC STATMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning fur Portable device:The device has been evaluated to meet general RF exposure requirement The device can be used in portable exposure condition wi1houtre5triction

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>