ADJ Shark Mini Wireless RGB LED Light Ergonomic Vertical Mouse User Manual

ADJ Shark Mini Wireless RGB LED Light Ergonomic Vertical Mouse User Manual

Thank you for choosing ergonomic vertical mouse. Please read user manual carefully when using this product.

Contents

• Vertical mouse X1
• User manual X1
• USB nano receiver X1

Features

• Vertical shape
• With RGB light
• Light weight and portable design

Specification

Receiver Connection

Open the cover of battery compartment in the bottom of mouse, insert one AA battery and take out the Nano receiver then insert it to USB port of computer, pushing the ON button, and the receiver will detect the device automatically.

RGB LED Light

Press the forward key and backward key at the same time for 3s to turn on or turn off the RGB light.

Rebuilding up the Connection between Mouse and Receiver

If your mouse cannot work normally, you can try to build up the connection again between mouse and receiver, as following steps:

1. Take out the nano receiver from computer and insert again, it will detect automatically for about 15 seconds.
2. Keep the mouse in ON mode and and install battery correct.
3. Keep 10CM effective distance between mouse and receiver.
4. Press the left button and right button at the same time for about 1-3 seconds then release it. The connection is being built for about 10 seconds.
5. If you cannot build up the connection in 10 seconds, please repeat the above steps.

Debugging Tips

• Check the receiver whether it is connected with the USB port.
• Check the effective distance between mouse and receiver.
• Make sure the mouse in the ON mode.
• Rebuild up the connection between the mouse and receiver.

This product is guaranteed against any manufacturing defect, as defined on the D.Lgs. February 2, 2002, No 24. In case of failure, please contact the retailer where you purchased it. You can be found at www.adjit for standards guarantee.
Please use the product only for the purpose for which it was designed. It is forbidden any other use or modification.

This product complies with the following directives:

• DIRECTIVE 2014/53/EU on the harmonization of the laws of the Member States relating to the making available on the market of radio equipment;
• DIRECTIVE 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment. The declaration of conformity for this product is visible on www.adjit site, on the product.

The symbol of the crossed-out trash indicates that the product, at the end of its useful life, must be treated separately from domestic waste and must be taken to a recyding center for electrical and electronic equipment or delivered to the seler when buying a replacement. The separate waste colection contributes in preventing possible adverse effects on the environment and health and promote the recovery of materials it is made. You are responsible for assigning the equipment in question at the appropriate waste disposal center. For more detailed information contact your local waste disposal service or the shop where it was purchased. Anyone who does not carry the product in a recycing center for electrical and electronic waste shal be punished with administrative penalty provided by law on the illegal disposal of waste.

Additional compliance information:
To obtain additional information about the compliance, go to ADJ website: www.adj.it/certification or contact the ADJ Customer Support to the following e-mail address: supporto@adj.it

Made in China – Imported and distributed by loT Tecnologie Via della Faeta, 1 – 00030 San Cesareo (RM) – ITALY

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>