Razeak RM-X33 Light Weight Wireless Gaming Mouse User Guide

Razeak RM-X33 Light Weight Wireless Gaming Mouse

Parts and Features

1. Left click
2. Right-click
3. Middle click
4. Forward click
5. Backward click
6. DPI button
7. Power and Light on
8. Power on and Light off
9. Power off
10. Polling Rate
11. Polling rate LED
12. Wired and charging Type-C
13. USB Nano wireless receiver

Include:

Wireless Mouse / USB Dongle / Charging cable / User manual

Power switch function

1. Switch on (7) Turn on the mouse and all LED ON
2. Switch on (8) Turn on the mouse but all LEDs OFF
3. Switch on (9) Turns off the mouse

QUICK START GUIDE

Mouse Instructions:

1. Remove the USB Nano receiver
2. Plug the receiver into your computer USB port
3. Turn on the mouse by switching on the power switch at the bottom of the mouse
4. Wait for the computer installation to finish

DPI setting and Indicator

1. Default DPI levels: 400-800-1600-3200-5000-7500 DPI levels
2. Press the DPI button on the top of the mouse to cycle through the DPI levels
3. The mouse scroll wheel LED color indicates the DPI level
   • 400DPI: Red Color Breathing, S00DPI: Yellow Color Breathing(default) 1600DPI: Green Color Breathing, 3200DP: Purple Color Breathing
   • 5000DPI: Blue Color Breathing, 7500DPI: White Color Breathing

Note:

1. DPI levels can be adjusted by the software. Max DPI is 1 0000DPI3
2. DPI LED effects can be adjusted or turned off to save power by the software
3. The software only supports Windows system and can be downloaded at the bottom of the web at www.razeak.com

Polling Rate:

• 125-250-500-1 000Hz can be set by the software.

Polling rate LED color:

• 1 25 red colors, 250 blue colors, 500 green colors, 1 000 purple colors

Wired and wireless function:

1. Wired and Wireless modes switch automatically. Simply plug the USB nano receiver into the computer without connecting the cable and the mouse will work in wireless mode
2. If you connect the USB-C cable from the computer to the mouse, the mouse will switch to wired gaming mode automatically

Low power and charging indication

1. Low power indicator: The mouse’s scroll wheel will blink red to indicate that the battery’s power is low (10%) and you should recharge your mouse’s battery by connecting it to the PC via the charging cable
2. When charging, the scroll wheel LED will blink orange. Once the battery is fully charged, the LED will turn solid green.

Pairing

1. If your mouse loses wireless connection, you can re-pair the mouse with the receiver by following these steps: Hold down the left button + middle button+ right button for 3 seconds until the scroll wheel flashes yellow
2. Release all the buttons, put the mouse close to the receiver then unplug the receiver and replug the receiver back into the usb port. The LED will stop flashing after the pairing is complete.

Warning and safety measures

1. Use the device only for its intended purpose.
2. Do not use the device if it gets wet.
3. Do not bend, twist, stretch, or heat the power cord.
4. Do not use harsh chemicals (alcohol, benzene, thinners, etc.) or detergents to clean the device. Use a damp soft cloth to clean.
5. Do not disassemble or modify the device, otherwise, it may void the warranty and damage the device.
6. The device contains electrical and electronic components, as well as a rechargeable battery. Do not dispose of household waste. At the end of its service life and use, the device should be disposed of at an appropriate disposal point.

Compatible with Devices

• PC/Laptop of Windows system (Windows 7 and up)
• Mac
• After-sell and warranty
• Thank you for using RAZEAK products, if any proouct questions, please contact us via these ways below:
• Q, Razeak Customer Service
• Email:customer.service@razeak.com
• Official website:www.razeak.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>