PYLE PCM60A Wireless 100 Watt Power Amplifier User Guide

: June 10, 2024
: Pyle

Table of Contents

FM RADIO CONTROL INSTRUCTIONS
CONTROL PANEL BUTTON
CONNECTION DIAGRAM
Features
Bluetooth Wireless Connectivity:
What’s in the Box:
Technical Specs:
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PYLE PCM60A Wireless 100 Watt Power Amplifier User Guide

WARNING!
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER OF THIS UNIT. THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO A QUALIFIED TECHNICIAN.

The lighting ash with arrow head symbol within an equilateral triangle is intended to alert the user to the presence of “DANGEROUS” voltage within the product’s enclosure that may be of sucient magnitude to constitute a risk of electric shock to humans. Users should exhibit extra safety when this symbol appears in this instruction manual and follow all precautions as they are stated.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in this manual.

Read these instructions thoroughly before using this item.
Keep these instructions for future reference.
Heed all warnings.
Follow all instructions.
WARNING: To prevent re or electric shock, do not expose this equipment to rain or moisture. Do not store or operate this product near any liquids.
Clean only with a dry cloth.
Do not store or operate this product near any heat sources such as radiators, heat registers, stoves, or other apparatuses (including ampliers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a round grounding prong. The wide blade or third prong is provided for your safety. If the provided plug does not t your outlet, consult an electrician for the replacement of the obsolete outlet.
Protect the all wires connected to this unit from being walked on or pinched, particularly plugs and the point where they exit from the unit. When removing the cord from the power outlet, remove it by holding the plug not by pulling the cord.
Unplug the unit during lighting storms or when unused for long periods of time.
When wiring this unit and all other equipment used in connection to this unit make sure that all of your equipment is turned OFF.
Once installation and wiring is complete power on all your equipment with the volume and level controls turned DOWN. Once all the equipment is ON slowly raise the volume or level controls to their proper positions.
When grounding this unit, be sure to do so correctly, so as not to defeat the built-in grounding in this unit.
Before placing, installing, rigging, or suspending any product, inspect all hardware, suspension, cabinets, transducers, brackets and associated equipment for damage. Any missing, corroded, deformed, or non-load rated component could signicantly reduce the strength of the installation, placement or array. Any such condition severely reduces the safety of the installation and should be immediately corrected. Use only hardware which is rated for the loading conditions of the installation and any possible short-term, unexpected overloading. Never exceed the rating of the hardware or equipment.
Consult a licensed, professional engineer regarding physical equipment installation. Ensure that all local, state and national Regulations regarding the safety and operation of equipment are understood and adhered to.
Refer all servicing to qualied service personnel. Servicing is required when theapparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

FM RADIO CONTROL INSTRUCTIONS

A. Connect the FM antenna before using the FM radio.
B. Press MODE button on the front panel or remote control to select FM mode.
C. Press PLAY/PAUSE button on the front panel or remote control, and will auto scan and sore FM Radio station from 87.5Mhz to 108Mhz.
D. Press NEXT/PREV button to select the FM station.

REMOTE CONTROL
Remote control gives you commanding access only to USB/SD, Wireless BT and FM functions and not the Master volume, microphone, bass, treble and other functions.

A. Please take out the battery sheet before using the remote control, otherwise the remote control will not work.
B. Press these two buttons to select the previous or next track in USB/SD or Wireless BT mode, there is no response in the FM mode.
C. Press this two buttons to select previous or next channel in FM mode, there is no response in the USB/SD and BT mode.
D. Press these two buttons to increase or decrease Wireless BT volume, USB/SD and FM. This buttons doesn’t control the master volume.
E. Press this button to auto scan all frequencies from 87.5MHz to 108MHz, the unit will auto store the channels in FM mode. Please see 4, C for other details.
F. Press this button to select one from play mode (USB/SD mode, FM mode and Wireless BT mode). Turning ON the unit will set the USB/SD mode automatically. MP3 les will be played automatically after inserting USB ash drive or SD card. You cannot select the AUX, CD and DVD input with this button.
G. Press and hold this button for 5 seconds to turn ON or OFF the USB/SD, Wireless BT and FM mode but not to power ON/OFF the unit. The unit will output the signal in CD, DVD, AUX input mode if you turn OFF the USB/SD, Wireless BT and FM.
H. Aim the remote controller at the receiver of the main unit.

Press this button to chose the ID3 display model, will show TITLE/ARTIST/ALBUM/OFF. Hold this button for 5 second to turn ON or OFF the MP3.
When in the FM mode, press this two buttons to tune FM Frequency.
Press these two buttons to select the previous or next track in USB or SD or Bluetooth mode, to select previous or next channel in FM mode.
Volume up or down
Press the numbers to select the tracks directly. The unit takes 1-2 seconds to response in USB or SD mode.
Press this button to repeat mode.
Press this button to select the playing mode, such as USB/SD/FM/WIRELESS BT
EQ function: Select a pre-set mode of the equalizer that is designed accordingly.
Play and Pause function for MP3 in USB/SD/BT model. Press this button to auto scan the channel in FM model, and auto store channel.

USB PORT
The USB port is only used for playing audio les on your USB ash drive. DO NOT use it for power supply as it may damage the unit.

NOTE:
The USB input is ONLY meant to connect to a USB dash drive (thumb drive). Connecting a MP3 player or computer directly to the USB ash drive input will result the unit failing to play audio from those devices.

CONTROL PANEL BUTTON

A. These buttons are only used to control the USB/SD, Wireless BT and FM functions and doesn’t control other functions.
B. MODE BUTTON: Press this button to select one from USB/SD mode, FM mode or Wireless BT play mode. USB/SD mode will be set automatically after turning ON the unit. Automatically plays mp3 les after inserting a USB ash drive or SD card. You cannot select AUX, CD and DVD input on this button.
C. Each press of the PLAY/PAUSE BUTTON causes the operation to change from play to pause or from pause to play in the USB/SD mode or Wireless BT mode. Press the PLAY/PAUSE BUTTON one time to auto scan all frequencies from 87.5MHz to 108MHz in FM mode. Press the button to auto scan channels when you use FM radio for the rst time. After stop searching, the unit will auto store all the radio channels and play from the rst radio channel. You don’t need to rescan every FM radio start up.
D. PREV and NEXT BUTTON: Use these two buttons to select previous, next track or folder, depending on these dierent modes as below.

In USB/SD mode: Use to select previous or next track, or use to select previous or next folder in FOLDER working mode.
In Wireless BT mode: Use to select previous or next track.
In FM mode: Use to select previous or next radio channel.

STEPS FOR CONNECTING WITH WIRELESS BT DEVICE
A. Press MODE button under the ID3 display screen and enter into bluetooth mode.
B. Search for the bluetooth device and nd the bluetooth name “Pyle Speaker”
C. Select the “Pyle Speaker” bluetooth name and wait for the device to pair. The screen will display “SEARCHING”.
D. The unit will make a sound conrming that the devices have successfully paired.
E. Once paired you can play music from your bluetooth device. You can also use the control buttons on the unit to select the tracks from your bluetooth device.

FRONT & BACK PANEL

USB/SD Card/Wireless BT Control Console
After inserting a USB ash drive/SD Card into the input terminal, be sure to set the input selector (13) to USB/SD, then press the mode button to choose between audio from the USB port, SD Card input, Wireless BT or FM radio. If you want to use the Wireless BT, check the below steps. SD Card Reader/USB Port: for using external media on this device, just plug your SD/USB into these ports.
CONTROL BUTTONS: These buttons are only used to control the USB/SD, Wireless BT and FM functions and doesn’t control other functions.
LCD Screen: all information regarding external media or this device will be displayed from this screen.
Power Switch: Press this switch to power the unit on and o.
MIC-1/AUX-1/MP3 Volume Control Knob: Turn this knob to adjust the volume of MIC-1/AUX-1/USB/SD/BT/FM
MIC-2/AUX-2 Volume Control Knob: Turn this knob to adjust the MIC 2/AUX-2 volume level.
MIC-3/AUX-3 Volume Control Knob: Turn this knob to adjust the MIC 3/AUX-3 volume level.
Bass Control: Turn this knob to adjust the low frequencies.
Treble Control: Turn this knob to adjust the high frequencies.
FM ANTENNA Jack: Connect the FM antenna.
BLUETOOTH ANTENNA: This antenna extends the audio Bluetooth operational distance.

INSTRUCTION

SPEAKER CONNECTION
One or more speakers (4, 8 or 16 Ohms) can be connected to the amplier with or without transformers. However, before you connect any speakers to the amplier, the total impedance must be calculated in order to avoid damage to the amplier. A total speaker impedance greater than 16 Ohms or less than 4 Ohms can cause this damage to occur.

SYSTEM 1: Single Speaker System
NOTE: Connect the speaker (+) to the amplier’s 4-Ohm, 8-Ohm or 16-Ohm terminal, depending on the speaker being used.
SPEAKER CONNECTION

SYSTEM 2 : Two (or more) Speakers in Series
NOTE: Connect the speaker (+) to the amplier’s 4-Ohm, 8-Ohm or 16-Ohm terminal, depending on the TOTAL IMPEDANCE of the two speakers. If each speaker has an impedance of 8-Ohm, the total speaker impedance in this series coguration is 16 ohms.
SPEAKER CONNECTION

SYSTEM 3: Two (or more) Speakers in Parallel
NOTE: Connect the speaker (+) to the amplier’s 4-Ohm, 8-Ohm or 16-Ohm terminal, depending on the TOTAL IMPEDANCE of the two speakers. If each speaker has an impedance of 8-Ohm, the total speaker impedance in this series conguration is 4 ohms.
SPEAKER CONNECTION

SYSTEM 4: Four Speakers in Series and Parallel
NOTE: Although the description above is for connecting two series pairs of 8 Ohms speakers in a parallel hook up, you may also select to combine a series pair and a parallel pair in a parallel hook up, simply be sure you have calculated the total impedance, and attach the speaker (+) circuit wire to the proper amp terminal.
SPEAKER CONNECTION

SYSTEM 5: Connecting Speakers with Transformers
NOTE: When the 25V or 70V constant line voltages are used, a line matching transformer must be used with each speaker, All transformers must be connected in parallel, never connect line transformers in series.
SPEAKER CONNECTION

CONNECTION DIAGRAM

Features

Bluetooth Receiver for Wireless Audio Streaming Ability
USB/SD/FM playing
Power On/O Switch & LED Indicator
AUX 1/MIC 1 Output Level Control
AUX 2/MIC 2 Output Level Control
AUX 3/MIC 3 Output Level Control
Bass and Treble Tone Controls
Contour Control on/o Loudness Switch
AUX RCA Output
AUX 1/AUX2/AUX 3 RCA Input
AUX/MIC Input Selector Switch
Mute Terminals
MIC 1/MIC 2/MIC 3 Terminals (MIC 1 Auto Talkover)
TEL/PAGING Terminals
Paging Output Level Control
MIC/TEL VOX Level Control (Internal)
MIC 1 XLR Connector
MIC 1 VOX (Auto-Talkover) Switch
Monitor 600-Ohm 1V Terminals (Music On Hold)
Monitor 1W 8-Ohm Terminals (Music On Hold)
Monitor Output Level Control (Music On Hold)
Replaceable Fuse

Bluetooth Wireless Connectivity:

Simple & Hassle-Free Pairing Ability
Works with All of Today’s Latest Devices (Smartphones, Tablets, Laptops, Computers, etc.)
Bluetooth Network Name: ‘Pyle Speaker’
Bluetooth Version:5.0
Wireless Range: 40’+ ft.