GIZZU GPS3800U 3840Wh UPS Power Station User Manual
- June 17, 2024
- Gizzu
Table of Contents
- FEATURES
- PACKAGE CONTENTS
- SPECIFICATION
- PRODUCT OVERVIEW
- LCD DISPLAY SCREEN
- INTRODUCTION
- ATTENTION
- USAGE AND HANDLING GUIDELINES
- GENERAL SAFETY INSTRUCTIONS
- WARNINGS
- DISCLAIMER
- STATEMENT OF LIMITED WARRANTY
- GUIDE TO OPERATE
- UPS MODE
- FAQS
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
HERO ULTRA 3840Wh
UPS POWER STATION
GPS3800U
USER MANUAL
Thank you for purchasing this Gizu product Before operating this product, please ensure that you read the user manual carefully in order to make sure that the best possible performance is obtained
FEATURES
PACKAGE CONTENTS
- lx Gizzu Hero Ultra 3840Wh UPS Power Station
- lx AC Charging Cable
- lx Car Charging to XT90 Cable
- lx User Manual
SPECIFICATION
Model | GPS3800U |
---|---|
Charging | Charging Input |
AC Input | 220-240V/50Hz 2200W Max (2.2hrs) |
XT90 Port | 12-160V 2000W Max (3hrs) |
Internal Battery Type | Lithium Iron Phosphate (LiFePO4) |
Batttery Capacity | 3840Wh |
Inverter | Pure Sine Wave |
LED Torch | 3W/4000k |
AC Output | 2x 220-240V/SOHz 3600W Rated I 7200W Max Peak |
DC Outputs | 3x Type-C 20W PD Port (5V-3A, 9V-2.22A, 12V/1.67A) |
lx Type-C 100W PD Port (5V/9V/12V/15V-3A, 20V/5A)
2x USB-A 18W QC3.0 Port
lx Car Socket Port (12V/10A, Max 120W) I Total Share 10A Max
2x DC5521 Port (12V/3A)
lx XT60 Port (12V/25A)
Battery Management Sytem| Yes
UPS Mode (Switchover Time)| 10ms
Lifespan| 3500 cycles
Protection Features| Short-Circuit & Over-Current Protection
Over-Voltage & Under-Voltage Protection
Over-Load & Temperature Protection
Dimensions| 55×32.1×46.4cm
Weight| 40.7kg
Please note: The total power consumption for all connected appliances
must be less than 3600W prior to connecting the device to the AC port. If the
power requirement draw exceeds 3600W, the wattage overdraw protection will
provide up to 10 seconds of runtime before the unit shuts itself down.
Wattage draw exceeding 7200W peak will cause the device to immediately
shutdown and this may cause damage.
PRODUCT OVERVIEW
LCD DISPLAY SCREEN
INTRODUCTION
Deliver power wherever and whenever you need it with the portable Gizu Hero
ultra UPS Power Station. The Hero Ultra offers 3840Wh of battery capacity.
It’s great for keeping your devices charged during outdoor adventures and
powering most household appliances during loadshedding. The elegant design is
durable, robust, and can be taken with you on any adventure.
The Gizu Hero Ultra UPS Power Station features two 220V AC plugs, two US8
ports, four Type-C ports, two DC ports, a car socket port, and an XT60 port.
These ensure that you can charge or power multiple devices simultaneously,
Pure Sine Wave technology and the ability to function likes ups ensures that
the Gizzu Hero Ultra seamlessly switches over to battery power during
loadshedding or a power outage, resulting in zero downtime for your connected
devices.
The Hero ultra UPS Power Station is compatible with most household appliances
and power tools running during loadshedding. Electric chainsaws, electric
irons, air conditioners, hairdryers, and air fryers are just some of the
products that you can still enjoy during a blackout.
The Gizzu Hero Ultra UPS Power Station features Lithium lron Phosphate
(LiFePo4) batteries that recharge from 0% t 100% about 2.2 hours and has a
rated lifespan of 3500 cycles. You can recharge the Hero Ultra in multiple
ways draw power from your car, solar panel, or from traditional wall sockets
at the home or office.
A battery management system helps to proactively monitor and manage the
rechargeable battery. In addition, the Hero Ultra also features safety
features like short-circuit, over-current, over-voltage, under-voltage, over-
load, and temperature protection.
Please note:
The total power consumption for all connected appliances must be less than
3600, If the power requirement draw exceeds 3600W,the wattage overdraw
protection will provide up to 10seconds of runtime before the unit shuts
itself down. Wattage draw exceeding 7200W peak will cause the device to
immediately shutdown and this may cause damage.
ATTENTION
Do not attempt to use the equipment before you are familiar with the
instructions. Keep these instructions for future use.
Attention should be paid, in particular,to safety guidelines. Please adhere to
the technical requirements of AC devices you are about to attach to your Gizu
Hero Ultra UPS Power Station, failure to adhere to these requirements, or
incorrect usage thereof, may cause personal injury or harm to others, as well
as potentially resulting in damage to equipment Observe in particular the
safety instructions given on the labels that are affixed to the device. Do not
remove or damage these labels. This device must not be used by children. Other
uses or alterations to the device or use other than the intended purpose will
immediately void the warranty and will pose a potentially serious health risk.
The
manufacturer is not liable for damages caused by any use other than the
intended purpose.
USAGE AND HANDLING GUIDELINES
- For maximum performance, be sure to charge the power station if it has been unused and in storage for more than 3 months,
- Keep this device away from heat sources and direct sunlight whilst in use as well as when in storage
- Do not use this product beyond the rated load.
- Be sure to use this product in a well-ventilated environment.
- Do not attempt to open the device. Opening the device may lead to risk of electric shock and fire
GENERAL SAFETY INSTRUCTIONS
- please use with caution when using this product near children
- Do not put fingers, or any part of your body into the product.
- Do not operate the portable power station with a damaged cord, plug, or output cable as it could cause a short circuit or a risk of fire.
- Do not disassemble the portable power station as this may cause fire or electric shock
- in the unlikely event of product failure, disconnect the portable power station from the power supply before performing any instructive maintenance operations.
- Please charge the product in a welt-ventilated place, do not obstruct the air circulation,
- please do not expose the product to fee or excessive heat
WARNINGS
Do not useasa toy
Do not wet the machine
Do not immerse the device in water
Please only use original Girzu accessories or make re they comply with the
correct specification requirements
Do not exceed the rated load of the product when used
DISCLAIMER
- The manufacturer will not be held responsible for damages caused by:
- Incorrect connection and/or use.
- lmpat of external forces, dropping the unit, or damaging parts of the device by mechanical impact or load.
- Any change made to the device.
- Using the device for purposes other than those described in this manual.
- Humidity and/or insufficent ventilation.
- Unauthorized opening of the device
NOTE : The above mentioned will immediately void the warranty of the product
STATEMENT OF LIMITED WARRANTY
This warranty covers a product that proves defective because of improper material or workmanship during the warranty period. Exclusions include problems caused by environmental conditions, malfunctions or damage due to negligence or mishandling of the equipment, for warranty claims and repair, please contact your local authorized reseller/service center,
GUIDE TO OPERATE
-
Main Power Control
• press and hold the power button for 3s to turn on/off the system -
LED Light Control
• Press the LED button to switch on the light, and again to change modes. Press and hold the button to switch the LED light off, -
US8 Button
• Press the button to turn the US8 ports on and off, -
DC Button
+ Press the button to turn the DC output ports on and off -
LCD Display
• Shows the battery and power information. -
AC Input Wattage Controller
• Use this dial to adjust the input power and rate of charge. Clockwise rotation increases the input power, and counterclockwise rotation decreases the input power. It is worth noting that charging this product at low power is beneficial for extending battery life. -
Cooling Suction/Exhaust Port
• When the product reaches its temperature threshold set by the system, the cooling fan will automatically switch on, please note that fan noise below 60dB is normal. Do not block the cooling fans. -
AC Button
• Press the button to turn the AC output ports on and off. -
XT90 Port
• This interface supports solar panel input or car charger input. For details, please refer to the ‘Solar Panel Connection’ and ‘Car Charging’ section. -
AC Input
• This device supports 2200W fast charging and can fully recharge from Oto 100% in 2.2hrs.
When charging please pay attention to the following points:
Please connect directly to the wall socket to charge the product, do not recharge via an extension cord.
Please do not connect other electrical appliances to this socket as it may trip the DB board. -
Overload Protection Button
• In the event of a power surge, the overload protection function (safety circuit breaker) will activate and cut off the AC input port.
• Please follow the sequence below to restore the AC input function:
• Turn off the power button and unplug all connected appliances.
• Turn on the power button.
• Press the overload protection button, reconnect the AC Cable.
UPS MODE
UPS Function
This product has a bypass mode, power is supplied directly to appliances from
the AC input, and seamlessly switches over in 10ms to battery in the event
that AC power fails.
- As shown in the figure below, connect the Power Station between the wall socket and the electrical appliances, ensure that the AC button is ON. When you turn on the power of the electrical appliances, it will use the AC power directly from the grid.
- If the grid power fails, it will automatically switch to the power station’s internal battery to supply power. In UPS mode, the maximum power output must be less than 1500W. If the AC output exceeds 1500W the AC output icon” “blinks” indicating overload and the battery will deplete.
Solar Panel Connection
- This product can be recharged via solar panels. The charging time may vary according to weather conditions.
- This device supports a maximum input of 2000W and a input voltage between 12-160V and a maximum of 20amps.
- Exceeding the maximum voltage can lead to equipment damage, and void the warranty.
We recommend the Following two charging schemes:
Scheme 1-Single panel connectionScheme 2-Multiple panel connection Car Charging
Recharge this power station from a car using the included car charging cable (see image below).
• This product supports 12V/24V car charger charging, please only recharge while the car is running, or the car battery may be exhausted.
BATTERY SPECIFICATIONS
Battery Type | 40135 LiFePo4 |
---|---|
Single cell rated voltage | 3.2V |
Single cell rated capacity | 20Ah |
Battery pack rated voltage | 48V |
Battery pack output voltage | 40v-54V |
Battery pack rated capacity | 3840Wh |
TROUBLESHOOTING TABLE
Phenomenon | Cause | Solution |
---|
The above output icon flashes and beeps.| The output exceeds the standard and
it’s short-circuited.| Remove the load, and then
press the ON/OFF button of the
corresponding output to remove the alarm
The temperature warning icon flashes and beeps.| The temperature of the
product is too high or too low.| Stop charging the device and disconnect all
appliances, turn the power off, wait for
the device to reach a suitable working
temperature, then the alarm is removed.
The icon of connecting to the AC mains flashes and the product cannot be
charged.| The charging cable is poorly connected.| Securely connect the
original
AC Charging cable
FAQS
1. Can I take this product on an airplane?
No, because this product has a battery and according to the International Air Transportation standards and regulations, products that carry a battery cannot exceed a 100Wh battery capacity.
2. How do I store the product when it's not in use?
The portable power station needs to be stored in a dry environment. Always charge the device before storage and recharge every 6 months.
3. How do I clean the product if it is dirty?
Please use a dry non-abrasive cloth to wipe. Do not wipe directly with a wet cloth or chemical solvent. Do not expose the product to large amounts of water.
4. How do I properly care for this Lithium Iron Phosphate battery product?
Ensure that you keep the product clean, ensure that venting slots are clear of dust/ obstructions, and ensure that the product can cool itself effectively. Periodic cleaning should be carried out without any liquids or compressed air.
5. Should I use a Universal Voltage Protector with this product?
We recommend the use of a Universal Voltage Protector when charging your Lithium Iron Phosphate battery product via AC input.
6. I accidentally dropped or damaged this product. Is it safe to continue using?
No, do not use a Lithium Iron Phosphate battery product if it has been dropped, shows visible signs of damage/bulging, or emits irregular noises.
7. Can I use any multi-plug or adapters with this product?
Please ensure that all connected devices, charging adapters, cables, and extension strips are properly certified for intended use, as well as compatible, with your Lithium Iron Phosphate battery product. The use of 3rd party, inexpensive power cords and extension strips can result in damage to connected devices or to your Lithium Iron Phosphate battery products.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>