Kawasaki ZX1000W Ninja Bike Instruction Manual
- June 17, 2024
- Kawasaki
Table of Contents
Kawasaki ZX1000W Ninja Bike
Product Information
Specifications:
- Model: ZX1000W
- Description: Crankcase Ring
- Part Number: 99994-0951
- Flat Rate Time (Hr): 0.1
Assembly Instructions:
Before you begin, read through these instructions and check that all parts
are present. Please note that Kawasaki cannot assume any responsibility for
damage resulting from incorrect installation. Kawasaki recommends that all
genuine accessories should be fitted by an authorized Kawasaki dealer.
The following symbols indicate the information for proper installation and operation in this instruction:
- NOTE : Indicates information that may help or guide you in the operation or service of the vehicle.
- Indicates a procedural step or work to be done.
Refer to the Service Manual (P/No.: 99924-1519-01) for detailed procedures.
Installation Instructions:
-
Using a high flash-point solvent, clean off any oil or dirt that may be on the clutch cover and alternator cover. Dry them with a clean cloth.
-
Peel the release papers [A] in back of the crankcase rings.
-
Stick the crankcase ring [1] to the clutch cover [A].
NOTE: Place the Kawasaki mark [B] horizontally. -
Stick the crankcase ring [2] to the alternator cover [A].
NOTE: Place the Kawasaki mark [B] horizontally.
Assembly Instructions
Model: | ZX1000W |
---|---|
Description: | Crankcase Ring |
Part Number: | 99994-0951 |
Flat Rate Time(Hr): | 0.1 |
Before you begin, read through these instructions and check that all parts are present. Please note that Kawasaki cannot assume any responsibility for damage resulting from incorrect installation. Kawasaki recommends that all genuine accessories should be fitted by an authorized Kawasaki dealer. The following symbols indicate the information for proper installation and operation in this instruction.
NOTE : indicates information that may help or guide you in the operation or service of vehicle.
Indicates a procedural step or work to be done.
Refer to the Service Manual (P/No.: 99924-1519-01) for detailed procedures.
PARTS LIST
No. | Component Name | Part No. | Qty | Remark |
---|---|---|---|---|
1 | Crankcase Ring (for Clutch Cover) | 14093-0571 | 1 | |
2 | Crankcase Ring (for Alternator Cover) | 14093-0573 | 1 |
Installation Instructions
- Using a high flash-point solvent, clean off any oil or dirt that may be on the clutch cover and alternator cover. Dry them with a clean cloth.
- Peel the release papers [A] in back of the crankcase rings.
- Stick the crankcase ring [1] to the clutch cover [A].
- Place the “Kawasaki” mark [B] horizontally.
- Stick the crankcase ring [2] to the alternator cover [A].
- Place the “Kawasaki” mark [B] horizontally.
FAQ’S
Can I install the crankcase rings myself?
Kawasaki recommends that all genuine accessories should be fitted by an authorized Kawasaki dealer to ensure proper installation and avoid any potential damage.
What should I do if some parts are missing?
Before beginning the installation, make sure to check that all parts listed in the parts list are present. If any parts are missing, contact an authorized Kawasaki dealer for assistance.