Mustang W676 Notebook Battery User Guide
- June 10, 2024
- MUSTANG
Table of Contents
Mustang W676 Notebook Battery
Product Information
Mustang W676 Notebook
The Mustang W676 Notebook is a portable computer that is designed to be used for various computing needs. It has a built-in battery that can be removed if needed for long-term storage or other reasons. The notebook has power management features that allow you to conserve battery life and optimize performance.
Power Management
The Mustang W676 Notebook comes with power management features that allow you to manage the battery life and optimize the performance of the notebook. You can adjust the power settings to suit your needs and preferences.
Removing the Battery
We recommend that you do not remove the battery yourself unless it is necessary for long-term storage or other reasons. If you need to remove the battery, follow the instructions below:
- Turn off the computer and turn it over.
- Slide the latch 1 in the direction of the arrow.
- Slide the latch 2 in the direction of the arrow and hold it in place.
- Lift the battery 4 out in the direction of the arrow from point 3.
Note: Do not remove any cover(s) and /or screw(s) for the purposes of device upgrade as this may violate the terms of your warranty. If you need to replace/remove the hard disk/RAM/optical device, please contact your distributor/supplier for further information.
Inserting the Battery
To insert the battery into your Mustang W676 Notebook, follow these steps:
- Turn off the computer and turn it over.
- Slide the battery into the compartment in the direction of the arrow 1.
- Slide the latches 2 (latch 2 should lock automatically) and 3 in the direction of the arrows to lock the battery.
Power Managemen
Bottom Cover Removal Warning
- Do not remove any cover(s) and /or screw(s) for the purposes of device upgrade as this may violate the terms of your warranty.
- If you need to replace/ remove the hard disk/ RAM/optical device etc., for any reason, please contact your distributor/ supplier for further information.
Removing the Battery
We recommend that you do not remove the battery yourself. If you do need to remove the battery for any reason (e.g. long-term storage) see below.
- Turn the computer off, and turn it over.
- Slide the latch in the direction of the arrow.
- Slide the latch in the direction of the arrow, and hold it in place.
- Lift the battery out in the direction of the arrow from point
Figure 3 – 16 Battery Removal
Inserting the Battery
- Turn the computer off, and turn it over.
- Slide the battery into the compartment in the direction of the arrow.
- Slide the latches (latch should lock automatically) in the direction of the arrows to lock the battery
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>