TEFAL YT40XX Automatic Garment Steamer User Manual
- June 11, 2024
- Tefal
Table of Contents
Automatic Garment Steamer
User Manual YT40XX / 1820010489/02
PRODUCT OVERVIEW
PRODUCT HANDLING
-
Handle for adjusting height of posts
-
Switch for locking/unlocking shutter
-
Posts
-
Lock
-
Shutter
ACCESSORIES -
pace for storing straighteners and remote control
-
Hanger x3
-
Large straighteners x4
-
Small straighteners x8
-
Rail
-
Built-in clasps
OTHER -
Shelf
-
Filter
-
Water container
-
Wheels
-
Stabiliser
INTERACTIVE DISPLAY
A Light-up strip
B Infrared receiver
C Program indicators
D Time remaining indicator
E Pause indicator
F Water container empty or incorrectly positioned indicator
G « on/off » button
H Program selection (see «Which program should I choose?» section)
I Time adjustment
J « start/stop » button
INSTALLING THE PRODUCT
Do not install Care For You in
a bathroom or any other damp
location.| Allow 20 cm of clear space
around the product.| Do not install Care For You near
a heat source.| Pull out the stabilisers at the
front and back of Care For You.
WHICH PROGRAM SHOULD I CHOOSE?
STEAM
You can adjust the steam time in five-minute increments. The longer the cycle,
the more steamed your garment will be.
10 min: Light and fast steaming.
20 min: Optimal steaming for most garments.
30 min: For garments that are difficult to de-crease.
straighteners are recommended for best results.
SANITIZE
20 min: Light sanitation. Reducesodours.
40 min: Full sanitation. Effectively eliminates odours that are embedded in
the garment and kills up to 99.99% of viruses(1) bacteria and germs (2).
In sanitise mode — 40 min. Test carried out by an external laboratory in Oct. 2020 on cotton.
(1) Coronavirus H COV-229E and Murine Norovirus.
(2) S. Aureus, K.Pneumoniae, E.Coli.
It is not necessary to use straighteners in sanitise mode.
GENTLE DRY
Perfect for delicate garments that can’t be tumble dried.
The cycle time can be adjusted between 10 and 90 min.
For wet clothes, please make sure that the clothes have been wrung out first.
It is not necessary to use straighteners in drying mode.
HOW DO I POSITION MY CLOTHES?
Using straighteners will help you achieve better steaming results.
However, for garments that easily lose their shape (e.g. chunky knit jumpers,
viscose, thin t-shirts etc.) use the STEAM cycle without straighteners.
Depending on the results, you may need to reposition the weights on the
clothes, or add or remove weights.
SHIRTS
Place up to two shirts on a hanger and hang on the rail.
If you want to steam a shirt, button it up to the top.
To steam, place a large straightener on the back of the shirt, a small
straightener on each sleeve and two small straighteners on the front of the
shirt.
Depending on the results, you may need to reposition the weights on the
clothes, or add or remove weights.
TROUSERS
Use the built-in clasps to hang your trousers in Care For You.
To steam, put a large straightener on the end of each trouser leg.
Make sure to empty the pocket of your garments.
OTHER
Use the built-in clasps and shelf to place cuddly toys, pillows and linen into Care For You.
USING THE PRODUCT
Pull the switch for locking/unlocking the shutter to lower it.
Press the up/down handles for adjusting the height of the posts and adjust
them until you hear the locking mechanism click into place.
Engage the four locks, starting from the bottom.
Make sure that the power cord is unplugged.
Remove the container and fill it with water.
Plug the appliance in.
You can dewrinkle up to five garments at a time and sanitize up to three
garments. (See « How do I position my clothes ? » section).
Close the shutter.
Always close the shutter before you start a cycle.
Point the remote control at the infrared receiver..
- Press the « on/off » button on the remote control.
- Select one of the three available programs. An indicator at the bottom of Care For You will light up to confirm the selected program.
- Use the « + » et « – » buttons to adjust the time displayed on the bottom of Care For You.
- Start the selected program by pressing the « start/stop » button.
The strip along the bottom of the product will light up as it heats up.
While your program is running, the screen will display the time remaining for
the cycle.
Do not open the shutter while the program is running.
A beeping sound will indicate that theprogram has finished.
Press the switch for locking/unlocking the shutter to lower it.
Remove the garments(s) and any straighteners used.
Optional: To fold up your product for storage, release the locks, starting
from the top.
Press on the handles for adjusting the height of the posts while applying
pressure to lower them.
Lift the shutter.
WHAT KIND OF GARMENTS SHOULD I USE WITH CARE FOR YOU?
All three Care For You programs are suitable for use with most fabrics. If in
doubt, refer to the symbols on your garment’s care label.
Do not put shoes or gloves in Care For You.
| CATEGORY | SYMBOL | MEANING | CFY |
|---|---|---|---|
| WASHING SYMBOLS | Hand wash only | ✓ | |
| Machine wash normal | ✓ | ||
| Synthetics cycle | ✓ | ||
| Gentle cycle | ✓ | ||
| Do not wash | ✓ |
TUMBLE DRYING
SYMBOLS| | Tumble dry allowed| ✓
| Permanent press| ✓
| Delicate| ✓
| Do not tumble dry| ✓
| Do not dry| X
| Line dry| ✓
| Drip dry| ✓
| Dry flat| ✓
RECOM- MENDED
TUMBLE DRYER
SETTINGS| | Tumble dry on high heat| ✓
| Tumble dry on medium heat| ✓
| Tumble dry on low heat| ✓
| Tumble dry, no heat| X
✓ :Suitable for use with Care For You.
X :Do not use with Care For You.
CLEANING THE PRODUCT
Turn off and unplug the appliance. Wait one hour for the appliance to cool
down completely.
SLift out the shelf, remove the ilter and remove any residue that may be there
with a sponge.
Clean the shutter using a damp cloth or well wrung-out sponge.
Never use abrasive agents or products to clean or descale the appliance.
Take care not to scratch the infrared receiver or transmitter on the remote
control.
TROUBLESHOOTING
If you have any problems with this product, do not hesitate to contact customer service.
| PROBLEMS | CAUSES | SOLUTION |
|---|---|---|
| I am not satisfied with the steaming results. | The selected time and/or number | |
| of straighteners is not suitable for the garment(s). | Restart a 30-minute |
STEAM cycle, button the garment up to the top where applicable and consider
using straighteners if possible with your garment (see «How do I position my
clothes?” section)
Depending on the results, you may need to reposition the weights on the
clothes, or add or remove weights.| The position or number of weights is not
suitable for the garment.| Follow these steps: 1/ Reposition the weights 2/
Add or remove weights.
Using the straighteners has stretched my garment.| You used the straighteners
on a garment that easily loses its shape.| Wash your clothes again. In most
cases, this is enough for it to regain its original shape. In the future, use
Care For You without the straighteners for this garment.
When the program is finished, the inside of the shutter is wet.| The drying
cycle at the end of the program was not finished.| – Startah a cloth
or – Dry wit 10-minute drying program
or – Leave to dry naturally.
There is too much steam coming out of the top of my product.| The shutter is
not correctly positioned.| Make sure that the shutter is properly clipped onto
the top of the product.
The product has stopped responding to the remote control.| The remote control
is not pointed at the infrared receiver or has run out of battery.| Point the
remote control at the infrared receiver at the bottom of the product and check
its batteries.
My product will not stay in the raised position.| The posts are not being
raised up high enough to activate the locking mechanism.| Lift the posts to
maximum height to activate the locking mechanism.
I am seeing this symbol: | Tank is empty or incorrectly positioned.| Fill the
water container and check that it properly clipped on.
Your appliance turns itself off.| After a few minutes, the appliance switches
off automatically to save energy.| You can turn your appliance back on using
the remote control.
I am not satisfied with the drying results.| Your garments are too wet.| Spin
your clothes before putting them into Care For You.
It leaves damp patches on the wall or ceiling.| You have not left enough space
between Care For You and the wall during use, the room is not sufficiently
ventilated or you have not closed the shutter fully.| Move Care For You at
least 50 cm away from the wall during use or place he appliance in a larger
room with better ventilation and more moderate temperature.
Ensure that the shutter is properly closed.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>