RETEKESS TR630 CD Boombox User Manual

RETEKESS TR630 CD Boombox User Manual

TR630
CD Boombox
User Manual

Features

● CD/CD-R/RW/MP3 player
● USB/TF card input port
● Transferring music from a disc/cassette tape/external sound source to a USB device or TF card
● AM/FM band radio
● Cassette tape recording and playback

NOTE : PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY BEFORE OPERATING THIS EQUIPMENT.

1. Please follow the prescribed steps while using the CD player, or you may suffer from harmful radiation. This CD player is a CLASS 1 LASER (I class laser) products.
2. When the CD cover is opened or negligently closed, invisible laser light will be generated, the item need to avoid irradiation of the radiation beam.
3. Please do not touch the bald head at will, otherwise it will affect the playback performance.

Important Safety Instruction

1. Do not use this product near water and moisture, for example: near a bathtub, washbowl, kitchen sink or laundry tub; in a wet basement; or near a swimming pool.
2. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
3. Do not block any ventilation openings. Slots and openings in the cabinet and in the back or bottom are provided for ventilation, to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surfaces. This product should never be placed near or over a radiator or heat source.
4. Object and liquid entry. Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in fire or electric shock. Never spill or spray any type of liquid on the product.
5. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Only use a dry cloth for cleaning.
6. Only use attachments/ accessories specified by the manufacturer.

Power Usage and Precautions

Important
Before connecting AC power or installing batteries, make sure that the function switch is set to the off position. This machine can only connect or use the specified battery and AC household power.

To Operate the Unit Using AC Power

Plug one end of the AC power cord into the AC power jack and the other end into a 220V household power outlet.

• When the AC plug was inserted into the AC IN Jack, the battery power will be cut off automatically.
• When the switch is in the off position, the power supply in the machine is not completely cut off, and the power supply can only be cut off completely by unplugging the power plug.
• When unplugging the AC power cord, you should hold the plug part instead of only pull the power cord.
• Never touch the AC power plug when your hands are wet. Otherwise it may cause fire or electric shock.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

Battery Operation

Install (or replace the batteries when it is drained) as below

1. Slide the Battery Compartment (28) out then lift it off.
2. Insert 6*1.5V um1 type batteries (not included) according to the polarity diagram inside the battery compartment.
3. Close the battery compartment.

Precautions

1. Unplug the apparatus or remove the battery during lightning storms or when unused for long periods of time to prevent damage or injury from possible battery leakage.
2. Do not mix different types of batteries together or old batteries with fresh ones. And the batteries must not be charged or heated. When removing the exhausted battery, if the battery leaks, remove the battery and wipe the liquid thoroughly. Waste batteries should be placed in officially designated recycling locations to avoid environmental pollution.
3. The battery life is limited for playing, please use AC power as much as possible.
4. When using batteries, the AC power cord must be unplugged from the unit. When the tape speed slows down, the volume decreases or the sound is distorted, please replace the batteries
5. The battery (battery pack or assembled battery) should not be used in an overheated environment (such as direct sunlight, open flames or similar environments).

Location of Controls

1.AC~ Socket (back side)
2.Carry handle
3.Headphone jack
4.USB/TF card socket
5.Bass button
6.Record button
7.Next song button
8.Previous song button
9.LCD display
10.Remote control receiver
11.Power indicator
12.Play/pause button
13.Stop button
14.Repeat/program button
15.CD door
16.FM Telescope Antenna
17.Function selector
18.Volume control knob
19.Pause button (Cassette)
20.Stop/Cassette tape door open button
21.Fast forward button (Cassette)
22.Fast backward button (Cassette)
23.Play button (Cassette)
24.Record button (Cassette)
25.Station selection knob
26.Band selection button
27.Cassette tape door
28.Battery compartment (bottom)

LCD Display

Remote Control

1.Play/pause button
2.Next song button
3.Previous song button
4.Number Keypad
5.Record button
6.Stop button
7.Repeat/program button

Remote Control Operation

1. Play/Pause Button: During CD / USB / TF card playback, press this button to pause playback, and press this button again to resume playback
2. Next Song Button: In the state of playing CD / USB / TF card, press this key to select the next song to play
3. Previous Song Button: In the state of playing CD / USB / TF card, press this key to select the previous song to play
4. Number Keypad: When playing a CD / USB / TF card, you can use the numeric keys to select a specific song. e.g, if you want to play the 23th track, enter number “2” then “3”, it will jump to this track to play
5. Record Button: Press this button to record or transferring music
6. Stop Button: In the state of playing CD / USB / TF card, press this button to stop playing.
7. Repeat/program button: During CD / USB / TF card playback, press this key to repeat a single track, folder or all tracks.

(Note: You can enter the program model in stop state. The operation for remote control is same as the host)

CD / USB / TF card Playback Operation

1. CD/MP3 playback: Slide the Function Selector (17) to CD position, open CD door(15) and place a CD disc on the center spindle with the correct direction, then close the door, it will be played after the detection is completed.
2. USB/TF card playback: Insert the USB / TF card that with MP3 format files into the USB / TF Card Socket (4), slide the Function Selector (17) to USB/TF card position, it will be played after the detection is completed. (Note: it does not support playback of WMA format files)
3. Press Play/Pause Button (12) to pause, press again to resume normal playback.
4. Turn the Volume Control Knob (18) to adjust volume level as desire.
5. Press the Previous Song Button (8) and Next Song Button (7) to select the track you want to play.
6. Press Stop Button (13) to stop playing.

Repeat Mode

Program Operation

In the stop state, press the Program Button (14) to enter the program setting, press the Previous Song Button (8) and Next Song Button (7) to select the track you want to program, press the Program Button (14) to confirm, then press Play Button (12) to play the programmed tracks. Press Stop Button (13) to stop playing if needed.

Note:
Do not use irregularly shaped laser discs, otherwise it will cause malfunctions.
Do not put more than one disc in the CD compartment at the same time.
Do not try to open the CD compartment door during playback.
Do not touch the CD head, otherwise it will cause malfunction.

USB/TF Card Recording Operation

Transferring music from disc to USB device or TF card

1. Slide the Function Selector (17) to CD position.
2. Close the CD Door (15) after placing a CD disc on the center spindle with the correct direction, it will be played after the detection is completed.
3. Insert the USB / TF card that with MP3 format files into the USB / TF Card Socket (4).
4. Long press Record Button (6) to record the sound of the disc.
5. Long press the Record Button (6) again to exit the recording mode and return to the playback state.

Transferring music from cassette tape to USB device or TF card

1. Slide the Function Selector (17) to Tape position.
2. Press Stop/Cassette Tape Door Open Button (20) to open the Cassette Tape Door (27) and put the tape to be recorded into the tape compartment correctly, then close the door.
3. Press Play Button (23) to start playing.
4. Long press Record Button (6) to record the sound of the cassette tape.
5. Long press the Record Button (6) again to exit the recording mode and return to the playback state.

Record external sound source to USB device or TF card

1. Slide the Function Selector (17) to USB/TF position.
2. Insert the USB / TF card into the USB / TF Card Socket (4) to play the file.
3. Long press Record Button (6) to record the external audio source through the built-in microphone.
4. Long press the Record Button (6) again to exit the recording mode and return to the playback state.

Play Recording Files

1. Slide the Function Selector (17) to USB/TF position.
2. Long press the Play/Pause Button (12) to switch to the mode of playing recording files.
3. Press the Previous Song Button (8) and Next Song Button (7) to select the recording file you want to play.

Radio Operation

1. Slide the Function Selector (17) to Radio position to turn on the radio.
2. Press the Band Selection Button (26) repeatedly to select AM or FM band as desire.
3. Turn the Station Selection Knob (25) to select the desired station.
4. Turn the Volume Control Knob (18) to adjust volume level as desired.

NOTE :

1. If the unit produces noise due to the influence of nearby appliances, (such as a TV, computer, or fluorescent light), you should move the unit to another place to listen to the radio.
2. When listening to FM radio, some frequencies may be interfered by the clock frequency.

For Better Reception

AM Band : This unit has a built-in ferrite rod antenna, which provides adequate reception in most areas. If reception is weak, turn the unit to improve reception.

FM Band : The FM Telescopic Antenna is for FM reception only. If reception is weak, adjust the length and the angle of the antenna.

Cassette Tape Player Operation

1. Slide the Function Selector (17) to Cassette Tape position.
2. Press the Stop/Cassette Tape Door Open Button (20) to open the Cassette Tape Door (27) and place a cassette tape in it correctly, then close the Cassette Tape Door (27).
3. Press Play Button (23) to play the track of the cassette tape.
4. Turn the Volume Control Knob (18) to adjust volume level as desire.
5. Press Stop/Cassette Tape Door Open Button (20) to stop the tape playback.
6. Press Play/Pause Button (19) to pause, press again to resume normal playback.
7. Press Fast Forward Button(21) or Fast Backward Button (22) to fast forward or rewind

Record Operation

1. Press the Stop/Cassette Tape Door Open Button (20) to open the Cassette Tape Door (27) and place a cassette tape in it correctly, then close the Cassette Tape Door (27). Rewind the tape to the position where you want to start recording.
2. To record the sound of CD disc or USB / TF card, slide the Function Selector (17) to the position of CD or USB / TF card, then press Play Button (23) to play. To record radio station, slide the Function Selector (17) to the Radio Position and tune to the desired radio station.
3. Press the Record Button (23) to start recording, at this time the Play Button (23) will be pressed.
4. If you need to stop the recording, press Stop Button (20) will be OK.
5. To record an external audio source, slide the Function Selector (17) to the “Tape” position and press the Record Button (23) to record.

Other Operations

Listen with Headphone: Using stereo headphone, insert it into the Headphone Jack (3).
If there is an error message on the display or other malfunctions of the device, please cut off the power and then restart the device

Care and Maintenance

1. Maintenance
   Do not expose compact discs to direct sunlight, high humidity, high temperatures or dust, etc. To prevent fire or shock hazards, disconnect your unit from the AC power source when cleaning. The finish on your unit may be cleaned with a dust cloth and cared for as other furniture. Use caution when cleaning and wiping the plastic parts.

2. Head Cleaning
   After every 10 hours of tape playback, you should clean the magnetic head and pinch the roller spindle. You should use cotton with a little cleaning fluid or alcohol for cleaning or use dry or wet cleaning tapes.

3. To prevent accidental erase
   After the recording is complete, use a screwdriver or other sharp tool to break the scratch-proof film on the tape to expose the scratch-proof hole.

4. How to use the tape to record again
   Cover the tape scratch-proof hole with adhesive tape, you can use the tape to record again.

Accessories

1 x AC Power Cord
1 x Remote Control
1 x Owner’s Manual

Specifications

RF ENERGY EXPOSURE AND PRODUCT SAFETY GUIDE

Before using this radio, read this guide which contains important operating instructions for safe usage and rf energy awareness and control for compliance with applicable standards and regulations.

Local Government Regulations
When radios are used as a consequence of employment, the Local Government Regulations requires users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a product label directing users to specific user awareness information. Your Retakes radio has a RF Exposure Product Label. Also, your Retakes user manual, or separate safety booklet includes information and operating instructions required to control your RF exposure and to satisfy compliance requirements.

Unauthorized modification and adjustment
Changes or modifications not expressly approved by the party responsible for compliance may void the user’s authority granted by the local government radio management departments to operate this radio and should not be made. To comply with the corresponding requirements, transmitter adjustments should be made only by or under the supervision of a person certified as technically qualified to perform transmitter maintenance and repairs in the private land mobile and fixed services as certified by an organization representative of the user of those services.

Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the local government radio management departments equipment authorization for this radio could violate the rules.

FCC Requirements:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

(If applicable) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CE Requirements:

• (Simple EU declaration of conformity) Henan Eshow Electronic Commerce Co., Ltd declares that the radio equipment type is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU and the WEEE Directive 2012/19/EU; the full text of the EU declaration of conformity is available at the following internet address: www.retekess.com.
• Disposal

The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in the European Union, all electrical and electronic products, batteries, and accumulators (rechargeable batteries) must be taken to designated collection locations at the end of their working life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to the laws in your area.

IC Requirements:
Licence-exempt radio apparatus This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

RF Warning Statements
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

RF Exposure Information(if appropriate)

• DO NOT operate the radio without a proper antenna attached, as this may damage the radio and may also cause you to exceed RF exposure limits. A proper antenna is the antenna supplied with this radio by the manufacturer or an antenna specifically authorized by the manufacturer for use with this radio, and the antenna gain shall not exceed the specified gain by the manufacturer declared.
• To avoid interference, turn off the radio in areas where signs are posted to do so.
• DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft, and blasting sites.

Avoid Choking Hazard

Small Parts. Not for children under 3 years.

Protect your hearing:

• Use the lowest volume necessary to do your job.
• Turn up the volume only if you are in noisy surroundings.
• Turn down the volume before adding headset or earpiece.
• Limit the amount of time you use headsets or earpieces at high volume.
• When using the radio without a headset or earpiece, do not place the radio’s speaker directly against your ear
• Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss

Note: Exposure to loud noises from any source for extended periods of time may temporarily or permanently affect your hearing. The louder the radio’s volume, the less time is required before your hearing could be affected. Hearing damage from loud noise is sometimes undetectable at first and can have a cumulative effect.

Approved Accessories

• This radio meets the RF exposure guidelines when used with the Retekess accessories supplied or designated for the product. Use of other accessories may not ensure compliance with the RF exposure guidelines and may violate regulations.
• For a list of Retekess-approved accessories for your radio model, visit the following website: http://www.Retekess.com

Guarantee

Remarks :

1. This guarantee card should be kept by the user, no replament if lost.

2. Most new products carry a two-year manufacturer’s warranty from the date of purchase.

3. The user can get warranty and after-sales service as below:
   Contact the seller where you buy.
   Products Repaired by Our Local Repair Center

4. For warranty service, you will need to provide a receipt proof of purchase from the actual seller for verification

Exclusions from Warranty Coverage:

1. To any product damaged by accident.
2. In the event of misuse or abuse of the product or as a result of unauthorized alterations or repairs.
3. If the serial number has been altered, defaced, or removed.

Henan Eshow Electronic Commerce Co., Ltd
Add: 7/F, Sanjiang Building, No. 170 Nanyang Road, Huiji District,
Zhengzhou, Henan, China
Facebook: facebook.com/RetekessRadio
E-mail: support@retekess.com
Web: www.retekess.com

MADE IN CHINA

References

• kess.com
• Retekess Company | Wireless Pager and Tour Guide System

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>