PLANET IGS-801M Managed Gigabit Ethernet Switch Installation Guide
- June 11, 2024
- PLANET
Table of Contents
PLANET IGS-801M Managed Gigabit Ethernet Switch Installation Guide
Package Contents
Thank you for purchasing PLANET Industrial Layer 2/4 Managed Ethernet Switch, IGS-801M. “Industrial Managed Switch” mentioned in this quick installation guide refers to the IGS-801M.
| IGS-801M | Industrial 8-Port 10/100/1000T Managed Ethernet Switch |
|---|
Open the box of the Industrial Managed Switch and carefully unpack it. The box should contain the following items:
Industrial Gigabit Ethernet Switch x 1| Quick Installation Guide x 1| Wall-
mount Kit x 1
---|---|---
| |
DIN-rail Kit x 1| RJ45 Dust Caps x 8|
| |
If any item is found missing or damaged, please contact your local reseller for replacement.
Requirements
The Industrial Managed Switch provides remote login interface for management purposes. The following equipment is necessary for further management:
- Workstation is installed with Ethernet NIC (Network Interface Card)
- Choice of Internet browsers includes Windows XP/2003/ 2008/2012/Vista/7/8/10, MAC OS X or later, Linux, UNIX, or other platforms compatible with TCP/IP protocols.
- The above workstation is installed with Web browser and JAVA runtime environment plug-in.
- Ethernet Port connection
- Use standard network (UTP) cables with RJ45 connectors.
Note
It is recommended to use Internet Explorer 8.0 or above to access the IGS-801M Industrial Managed Switch.
Wiring the Power Inputs
The Upper Panel of the Industrial Managed Switch indicates a DC inlet power socket and consists of one terminal block connector within 6 contacts. Please follow the steps below to insert the power wire.
-
Insert positive / negative DC power wires into Contacts 1 and 2 for POWER 1, or 5 and 6 for POWER 2.
-
Tighten the wire-clamp screws for preventing the wires from loosening.
Note
The wire gauge for the terminal block should be in the range between 12 and 24 AWG.
Note
- The power input range is 12V ~ 48V DC and supports 24V AC.
- Use one power input when using 24V AC.
Grounding the Device
Users MUST complete grounding wired with the device; otherwise, a sudden
lightning could cause fatal damage to the device.
Web Login
Starting Web Management
The following shows how to start up the Web Management of the Industrial Managed Switch. Note the Industrial Managed Switch is configured through an Ethernet connection. Please make sure the manager PC must be set to the same IP subnet address.
For example, the default IP address of the Industrial Managed Switch is 192.168.0.100, then the manager PC should be set to 192.168.0.x (where x is a number between 1 and 254, except 100), and the default subnet mask is 255.255.255.0
Figure 4-1: IP Management Diagram
Logging in to the Managed Switch
-
Use Internet Explorer 8.0 or above for Web browser and enter IP address https://192.168.0.100 (the factory default IP address) to access the Web interface.
-
When the following dialog box appears, please enter the default user name “admin” and password “admin” (or the password you have changed before) as shown in ****Figure 4-2.
- DefaultIPAddress: 192.168.0.100
- Default User Name: admin
- Default Password: admin
Figure 4-2: Login Screen
-
After entering the password, the main screen appears as Figure 4-3.
Figure 4-3: Web Main Screen of IGS Industrial Managed Switch -
The Switch Menu on the left of the Web page lets you access all the functions and status the Industrial Managed Switch provides.
Now, you can use the Web management interface to continue the Switch management. Please refer to the user manual for more.
Note
For security reason, please change and memorize the new password after this first setup.
Resetting the Switch to Default
To reset the IP address to the default IP Address “192.168.0.100” and the user
password to factory default mode (default password is admin), press the
hardware based reset button on the side panel for about 10 seconds. After the
device is rebooted, you can log in the management Web interface within the
same subnet of 192.168.0.xx and default password. Be noted that all the
previous setups will be disappeared after the factory default reset is made.
Customer Support
Thank you for purchasing PLANET products. You can browse our online FAQ resource on PLANET web site first to check if it could solve your issue. If you need more support information, please contact PLANET switch support team.
PLANET online FAQs:
http://www.planet.com.tw/en/support/faq
Switch support team mail address:
support@planet.com.tw
IGS-801M User’s Manual:
https://www.planet.com.tw/en/support/download.
php?&method=keyword&keyword=IGS-801M&view=3#list
Copyright © PLANET Technology Corp. 2021. Contents are subject to revision without prior notice. PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners.
Symbols
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>