Eufy Video Doorbell 2K Wired User Manual
- June 11, 2024
- Eufy
Table of Contents
Eufy Video Doorbell 2K Wired
QUICK START GUIDE
What’s in the Box
What’s Required for Installation
Phillips-Head Screwdriver
Power Drill with 1/4″ (6.35mm) Drill Bit
How the System Works
The Video Doorbell system includes 2 parts. One is the video doorbell at your porch. The other is the electronic chime plugged on indoor power socket. The video doorbell is powered by existing doorbell wires. In order to get sufficient power from the doorbell circuit, user needs to bypass the existing doorbell chime on the circuit.
EufySecurity App Installation
Search keyword “EufySecurity” on App Store or Google Play and install the App on your phone.
Register and login to the App. Add video doorbell and scan the QR code for
later installation process.
The QR code can be found on the back of the documentation folder or on the
back of the video doorbell.
Tips:
Follow these steps to complete the setup on the eufy Security Video Doorbell.
Step 1. Scan the QR Code.
Step 2. Physical installation.
Step 3. Go to the App and finish the system setup.
Video Doorbell Installation
Note: Make sure you have installed the EufySecurity App and scan the QR code before start handling the doorbell installation.
Step 1:
Ring the existing doorbell, make sure it’s working and locate the place of
your existing chimes in the
house.
Step 2:
Shut off the doorbell power supply. If you’re not sure, shut off the main
power supply in your house.
Turn the lights in your home on / off to make sure the electricity in your
house is properly shut off.
Step 3 :
Find the doorbell chime in your house, then remove the cover and find the
screw terminals with TRANS
and FRONT markings. Use the provided jumper for existing chime to connect the
two terminals. This is
to bypass the doorbell chime and will not affect the normal operation of the
circuit.
Note:
-
The video doorbell requires user to bypass the existing chime first to get sufficient power.
Without this step, the video doorbell will still be able to power on but will operate unstably. -
In most cases, the existing doorbell circuit looks like below chart. Find the existing doorbell chime in your house, remove the cover and take a photo of the wire connection in case you need to reconnect it.
-
Use the provided jumper to connect FRONT and TRANS terminals to bypass the chime on the circuit. Do not remove the original wire connecting to the chime. If your doorbell chime has different markings or you have multiple chimes, refer to the help session in the App for the custom wiring instructions or consult a qualified electrician.
-
When the jumper is in place, the existing chime will not sound anymore.
What are required: Jumper for existing chime / Phillips-Head Screwdriver
Step 4:
Remove the existing doorbell button at the front door. Pull the two wires out
carefully when removing
the old doorbell. Straighten the wire ends if necessary.
What’s required: Phillips-Head Screwdriver
Step 5:
Determine the mounting position of the doorbell. Consider the below factors:
1. Check if you can reuse the existing holes and anchors on the wall or door
frame.
2. If you are drilling the mounting holes for the first time the recommended
mounting height is 48″ from the ground.
If you are mounting the doorbell on a wooden wall or board, do NOT drill holes. Skip to Step7 and use screws directly to mount the Mounting Bracket.
If your wall is stucco, brick or concrete, you need to drill holes. Use the Screw Hole Positioning-Card to mark the position and drill holes with 1/4″ (6.35mm) drill bit.
What are required: Power Drill with 1/4″ (6.35mm) Drill Bit / Screw Hole Positioning-Card
Optional: Use the 15° mounting wedge as a supplementary mounting bracket if you wish to see more on a specific side.
Step 6:
Use the anchors provided when installing in materials such as stucco, brick, or concrete. There is no need to use anchor If you were installing on wooden doorframe.
What’s required: Anchors
Step 7:
Lead the two doorbell wires through the central square hole on the bracket
before start mounting.
Insert the two screws provided through the screw holes or through the 15°
mounting wedge(Install the mounting bracket to the 15° mounting wedge in
prior), and fasten the screws tightly.
What are required: Mounting Bracket / Screw Packs / 15° Mounting Wedge(Optional) / Phillips-Head Screwdriver
Step 8:
Connect the wires to the two terminals at the back of the doorbell, then tighten the terminal screws. Wire can connect to any terminal as the electric current is alternating current.
Note: To prevent short-circuit, make sure the wires are not touching each other after connecting them to the terminals. If the wires are too short, use the extension wires and wire nuts provided to make them longer. Use electrical wiring tape to secure the connection if the wall doesn’t have space for wire nuts.
What are required: Extension Wires and Wire Nuts (Optional) / Video doorbell / Philips-Head Screwdriver
Step 9:
There are 2 thermal conductive pads on the mounting bracket. They’re used to
conduct heat from video doorbell to the metal bracket. Remove the films on the
thermal conductive pads before you mount the doorbell.
Hook the doorbell on top of the mounting bracket and then snap the doorbell
bottom to the bracket. You may hear a “click” sound.
Use the doorbell detaching pin provided if you wish to detach the doorbell from the mounting Bracket. Press and hold the hole on the bottom of the doorbell and then lift its bottom to take it off.
The detaching pin has magnet pad on the black-color side. Stick it on iron surface where you can find it easily.
Note: The oval holes are speaker holes. Only press the round hole to detach the doorbell.
What’s required: Doorbell detaching pin
Step 10:
Switch the doorbell or master circuit breaker to ON.
Step 11:
Wait until the doorbell ring flashes yellow. Then follow the on-screen instructions in EufySecurity App to connect the video doorbell to your home Wi-Fi.
Step 12:
Follow the on-screen instructions in EufySecurity App. Install the doorbell power connector to the doorbell chime and then pair it to your video doorbell.
Note: One video doorbell can link up to 4 electronic chimes. Use the volume and music buttons on the side of the electronic chime to adjust the volume and ringtone.
What are required: Doorbell chime / Doorbell chime power connector
Safety
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.
The following importer is the responsible party
Company Name: POWER MOBILE LIFE, LLC
Address: 400 108th Ave NE Ste 400, Bellevue, WA 98004-5541
Telephone: 1-800-988-7973、
This product complies with the radio interference requirements of the European Community.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device is in compliance
with the essential requirements and other relevant provisions of Directive
2014/53/EU.For the declaration of conformity, visit the Web site
www.eufylife.com
Do not use the Device in the environment at too high or too low temperature,
never expose the Device under strong sunshine or too wet environment.
The suitable temperature for T8200 is -20°C-50°C.
The suitable temperature for T8740 is 0°C-45°C.
RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm distance between the device and human body.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
- Wi-Fi Operating Frequency Range: 2412~2472MHz for EU;
- Wifi Max Output Power: 19dBm
- Bluetooth Operating Frequency Range: 2402~2480MHz;
- Bluetooth Max Output Power: 8dBm 433MHz
- Frequency Range: 433.92MHZ;433MHz
- Max Output Power: 10dBm
The following importer is the responsible party (contact for EU matters only)
Importer: Anker Technology (UK) Ltd
Importer Address: Suite B, Fairgate House, 205 Kings Road, Tyseley,
Birmingham, B11 2AA,
United Kingdom
This product is designed and manufactured with high quality materials and components, which can be recycled and reused.
This symbol means the product must not be discarded as household waste, and
should be delivered
to an appropriate collection facility for recycling. Proper disposal and
recycling helps protect natural resources, human health and the environment.
For more information on disposal and recycling of this product, contact your
local municipality, disposal service, or the shop where you bought this
product.This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.”
Please note that your rights under applicable law governing the sale of
consumer goods remain unaffected by the warranties given in this Limited
Warranty.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
IC RF Statement:
When using the product, maintain a distance of 20cm from the body to ensure
compliance with RF exposure requirements.
DOWNLOAD
Eufy Video Doorbell 2K Wired User Manual – [Download PDF]
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>