BeaverLAB DDL-MX Intelligent Microscope Instruction Manual

BeaverLAB DDL-MX Intelligent Microscope Instruction Manual

1 Product Overview

• Thank you for purchasing BeaverLAB intelligent microscope, hereinafter referred to as microscope.
• Please read this manual carefully and keep it properly before use. Do not use the microscope without any instructions.

2 Instructions For Use

• Please read this manual carefully and use it correctly.
• Pay attention to protect the lens. Be sure to close the lens cover after using, avoid entering dust or foreign matters.
• Pay attention to protect the display screen. Please close the screen after using, avoid damaging the display screen.
• The observation table of this microscope is a lifting table. Please keep the table clean and do not press it heavily.
• When placing specimens or other observation objects, pay attention to the placement position and place them in the center accurately below the lens as far as possible. Avoid being unable to see objects and bring a bad experience.
• Import of external files is not supported (external files such as videos, pictures, and documents do not support import and reading, which may cause the device to malfunction.)

3 Instructions For Microscope

Microscope Composition

Knob Function Description

Interface Usage

Use Environment

• At low temperature, the available capacity of the battery will decay to varying degrees.
• In case of any abnormality, please contact the after-sales department for maintenance. Disassembling the microscope without permission will not enjoy the warranty policy and may lead to irreparable damage.

Charging Instructions

• During charging, if the microscope shell and battery have slight heating, it is normal. Please rest assured to use it

Storage Environment

• Store in a cool and dry place for daily use and avoid direct sunlight.
• Avoid storing the microscope in a place where there is a risk of falling, which may cause lens deviation inside the microscope or damage to other components, as well as other irreparable defects damage problem.

4 Instructions for using the microscope

The Pithy Formula For Microscope Use: large multiples should be close and small multiples should be far away. Coarse adjustment depends on lifting and fine adjustment depends on knob (coarse adjustment can be fine adjusted after seeing the observation object)

Use Of Specimen Holder

Matters Needing Attention:

• The fixing clip adopts magnetic suction type, which can be absorbed in place as long as it is installed close to the base.
• The adsorption positions at the bottom and base of the specimen fixing clip shall be cleaned regularly to avoid adsorption of other metal substances.

Use Of Observation Panel

Matters Needing Attention :

• The observation panel shall be wiped regularly to avoid oil stain or other stains affecting the observation experience.

Description of light adjustment function of observation window

If the light becomes stronger and weaker, the outline and details of the specimen will have different effects. Please pay attention to the adjustment and use.

5. Interface User Guide

Software interface function introduction：

6 Function Description Of External Equipment

Connect To Mobile Phone

Purpose :
Read the pictures in the microscope memory with the mobile phone or copy them to the mobile phone.

③ Open the mobile phone File manager. At this time, you can see a USB storage device. After opening, you can see all the pictures in the memory of MX microscope.

Computer Device Connection

Visitwww.dangdangli.com Download and install the software installation package

Purpose :
Directly connect to the computer, use the computer software to observe and operate, and the screen is larger.

7 Accessories And Tools

8 Troubleshooting Of Microscope

9 Trademark And Legal Declaration

“ “, ” BeaverLAB” is a trademark applied for or registered in Chinese Mainland by Beaver

Technology Co., Ltd. and is used on this product use. Without the permission of the trademark owner, no person or institution may use the above trademark logo on unapproved goods without authorization.

This manual is made and copyrighted by Beaver culture and innovation technology (Shenzhen) Co., Ltd. no organization or individual may copy or distribute all or any part of this manual without permission.

Due to the continuous improvement of product functions, design changes and other reasons, this manual may be inconsistent with the products you purchased. Please take the actual products as the standard. Product executive standard: GB 4943.1-2011 GB / T 9254-2008

10 Product Warranty Description

1. Warranty Period

2. Within 7 days from the day after you sign for it, if the product has any performance failure listed in the performance failure table of BeaverLAB intelligent microscope products, you can enjoy the return or replacement service free of charge after being tested and determined by BeaverLAB after-sales service center;

3. Within 8-15 days from the next day after you sign for it, if this product has any performance failure listed in the performance failure table of BeaverLAB intelligent microscope products, it can enjoy the replacement or maintenance service free of charge after being tested and determined by BeaverLAB after-sales service center;

4. Within 6 months from the day after you sign for it, this product has the performance faults listed in the performance fault table of BeaverLAB intelligent microscope products. After being tested and determined by BeaverLAB after-sales service center, you can enjoy the maintenance service free of charge.
   Friendly Tip: because the packing box needs to be used during transportation to ensure the safety of product transportation, it is recommended that you keep the packing box for at least 30 days from the date of signing.

5. Warranty Content
   The host is guaranteed for 6 months.

6. Non Warranty Regulations

7. Unauthorized maintenance, misuse, collision, negligence, abuse, liquid inlet, accident, modification and other incorrect use methods, or tearing, altering labels and anti-counterfeiting marks;

8. The warranty period has expired;

9. Damage caused by force majeure;

10. It does not comply with the performance faults listed in the performance fault table of BeaverLAB intelligent microscope products;

11. Due to human factors, this product and its accessories have the performance faults listed in the performance fault table of BeaverLAB intelligent microscope products.

Overall Parameters Of Microscope

Intelligent Microscope MX

Product Name : Intelligent microscope MX
Product Model : DDL-MX
Product Size : 214x224x324mm
Input Voltage : DC5V 1A
Battery Capacity : 3500mAh
Display Size : 9 inches
Brand Name : BeaverLAB
Executive Standard : CE FCC

Brand Company : Beaver Technology (Shenzhen) Co., Ltd.
Service Mailbox : support@beaverlabtech.com

Please refer to BeaverLAB official website for more information of this product : www.beaverlabtech.com / www.dangdangli.com

References

• BEAVERLAB
• 海狸文创科技（深圳）有限公司-当当狸学生[智能显微镜][儿童显微镜][益智玩具]海狸文创科技（深圳）有限公司

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>